On Fri, Oct 09, 2015 at 09:53:16AM +0200, Holger Glaess wrote: > > On Fri, Oct 09, 2015 at 06:22:53AM +0200, Holger Glaess wrote: > >> hi > >> > >> what kind of information you need more ? > >> > > > > uhm. this machine is very very strange. It has devices I've never > > seen before and many other devices not even recognized. Without access > > to the hardware there's not much we can do here. > > > > You've posted about this machine in the past, and we've done our best > > to help you but I think this may be a losing battle. > > > > hi > you mean physikal access or is connection by ssh also ok ? > > ssh access i can give you. >
I meant getting one of these boards in hand. > > Holger > > > >> holger > >> > >> > >> Stopped at 0:ehci0: unrecoverable error, controller halted > >> panic: kernel diagnostic assertion "ci->ci_fpcurproc == p" failed: file > >> "../../../../arch/i386/isa/npx.c", line 881 > >> Stopped at Debugger+0x7: leave > >> TID PID UID PRFLAGS PFLAGS CPU COMMAND > >> Debugger(d09fe02c,f51cfdd4,d09d8f30,f51cfdd4,d709bfc8) at Debugger+0x7 > >> panic(d09d8f30,d0957746,d0b0522f,d0b0532c,371) at panic+0x71 > >> __assert(d0957746,d0b0532c,371,d0b0522f,d0bbb160) at __assert+0x2e > >> npxsave_proc(d7216744,0,f51cfe58,d03b9029,40) at npxsave_proc+0x5a > >> cpu_exit(d7216744,d7215000,d709b00c,0,1) at cpu_exit+0x2a > >> exit1(d7216744,4,1,d03b3844,40,4,1,0) at exit1+0x22c > >> sigexit(d7216744,4,0,0,21fc000) at sigexit+0x76 > >> postsig(4,0,808f05d0,63,21de800) at postsig+0x28a > >> userret(d7216744) at userret+0x49 > >> alltraps(ffffffff,ffffffff,ffffffff,ffffffff,ffffffff) at alltraps+0x2e > >> uvm_fault(0xd0bbb0a0, 0xd000, 0, 1) -> e > >> kernel: page fault trap, code=0 > >> Stopped at trap+0x18: movl 0x2c(%esi),%edi > >> TID PID UID PRFLAGS PFLAGS CPU COMMAND > >> trap() at trap+0x18 > >> --- trap (number 32) --- > >> 0: > >> http://www.openbsd.org/ddb.html describes the minimum info required in > >> bug > >> reports. Insufficient info makes it difficult to find and fix bugs. > >> ddb> > >> > >> > >> OpenBSD 5.8-current (GENERIC) #1219: Thu Oct 8 07:55:22 MDT 2015 > >> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > >> cpu0: Genuine Intel(R) processor 1.20GHz ("GenuineIntel" 686-class) 1.21 > >> GHz > >> cpu0: > >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF > >> real mem = 1072041984 (1022MB) > >> avail mem = 1038999552 (990MB) > >> mpath0 at root > >> scsibus0 at mpath0: 256 targets > >> mainbus0 at root > >> bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. > >> 2.2 @ > >> 0xf0800 (39 entries) > >> bios0: vendor Phoenix Technologies, LTD version "ANSA 3020 R01 > >> Jul,2,2009" date 07/06/2009 > >> acpi0 at bios0: rev 0 > >> acpi0: sleep states S0 S3 S4 S5 > >> acpi0: tables DSDT FACP MCFG APIC > >> acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) > >> PEX3(S5) > >> HUB0(S5) PCI0(S5) > >> acpitimer0 at acpi0: 3579545 Hz, 24 bits > >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > >> cpu0: apic clock running at 133MHz > >> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus 2 (EPA1) > >> acpiprt2 at acpi0: bus -1 (BR10) > >> acpiprt3 at acpi0: bus -1 (BR11) > >> acpiprt4 at acpi0: bus -1 (BR12) > >> acpiprt5 at acpi0: bus -1 (BR13) > >> acpiprt6 at acpi0: bus -1 (BR14) > >> acpiprt7 at acpi0: bus 3 (P0P1) > >> acpiprt8 at acpi0: bus -1 (PEX0) > >> acpiprt9 at acpi0: bus -1 (PEX1) > >> acpiprt10 at acpi0: bus -1 (PEX2) > >> acpiprt11 at acpi0: bus -1 (PEX3) > >> acpiprt12 at acpi0: bus -1 (HUB0) > >> acpicpu0 at acpi0: C1(@1 halt!) > >> acpitz0 at acpi0: critical temperature is 75 degC > >> acpibtn0 at acpi0: PWRB > >> bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! > >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) > >> pchb0 at pci0 dev 0 function 0 "Intel EP80579 Host" rev 0x01 > >> "Intel EP80579 Memory" rev 0x01 at pci0 dev 0 function 1 not configured > >> "Intel EP80579 EDMA" rev 0x01 at pci0 dev 1 function 0 not configured > >> ppb0 at pci0 dev 2 function 0 "Intel EP80579 PCIE" rev 0x01: apic 2 int > >> 16 > >> pci1 at ppb0 bus 1 > >> em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > >> 00:14:b7:00:61:63 > >> ppb1 at pci0 dev 3 function 0 "Intel EP80579 PCIE" rev 0x01: apic 2 int > >> 16 > >> pci2 at ppb1 bus 2 > >> ppb2 at pci0 dev 4 function 0 "Intel EP80579" rev 0x01 > >> pci3 at ppb2 bus 3 > >> em1 at pci3 dev 0 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int > >> 16, > >> address 00:14:b7:00:61:65 > >> em2 at pci3 dev 1 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int > >> 17, > >> address 00:14:b7:00:61:66 > >> em3 at pci3 dev 2 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int > >> 18, > >> address ff:ff:ff:ff:ff:ff > >> gcu0 at pci3 dev 3 function 0 "Intel EP80579 GCU" rev 0x01 > >> "Intel EP80579 CANbus" rev 0x01 at pci3 dev 4 function 0 not configured > >> "Intel EP80579 CANbus" rev 0x01 at pci3 dev 5 function 0 not configured > >> "Intel EP80579 Serial" rev 0x01 at pci3 dev 6 function 0 not configured > >> "Intel EP80579 1588" rev 0x01 at pci3 dev 7 function 0 not configured > >> "Intel EP80579 LEB" rev 0x01 at pci3 dev 8 function 0 not configured > >> vendor "Intel", unknown product 0x502d (class processor subclass > >> Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured > >> "Intel EP80579 Reserved" rev 0x01 at pci3 dev 10 function 0 not > >> configured > >> vendor "Intel", unknown product 0x504c (class processor subclass > >> Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured > >> "Intel EP80579 Reserved" rev 0x01 at pci3 dev 12 function 0 not > >> configured > >> uhci0 at pci0 dev 29 function 0 "Intel EP80579 USB" rev 0x01: apic 2 int > >> 23 > >> ehci0 at pci0 dev 29 function 7 "Intel EP80579 USB" rev 0x01: apic 2 int > >> 23 > >> usb0 at ehci0: USB revision 2.0 > >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > >> pcib0 at pci0 dev 31 function 0 "Intel EP80579 LPC" rev 0x01 > >> ahci0 at pci0 dev 31 function 2 "Intel EP80579 AHCI" rev 0x01: msi, AHCI > >> 1.1 > >> ahci0: port 0: 3.0Gb/s > >> scsibus1 at ahci0: 32 targets > >> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK6037GS, DL34> SCSI3 > >> 0/direct > >> fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT > >> sd0: 57231MB, 512 bytes/sector, 117210240 sectors > >> ichiic0 at pci0 dev 31 function 3 "Intel EP80579 SMBus" rev 0x01: apic 2 > >> int > >> 19 > >> iic0 at ichiic0 > >> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > >> usb1 at uhci0: USB revision 1.0 > >> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > >> isa0 at pcib0 > >> isadma0 at isa0 > >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > >> com0: console > >> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard > >> pcppi0 at isa0 port 0x61 > >> spkr0 at pcppi0 > >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > >> vscsi0 at root > >> scsibus2 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus3 at softraid0: 256 targets > >> root on sd0a (f67e7646a5f64b3f.a) swap on sd0b dump on sd0b > >> WARNING: / was not properly unmounted > >> 06:21:01 Fri Oct 09 > >> you are on aerzte
