The same problem, src via cvs. sshd patch001
(…) cc -o sshd sshd.o auth-rhosts.o auth-passwd.o sshpty.o sshlogin.o servconf.o serverloop.o auth.o auth2.o auth-options.o session.o auth-chall.o auth2-chall.o groupaccess.o auth-bsdauth.o auth2-hostbased.o auth2-kbdint.o auth2-none.o auth2-passwd.o auth2-pubkey.o monitor_mm.o monitor.o monitor_wrap.o sftp-server.o sftp-common.o roaming_common.o roaming_serv.o sandbox-systrace.o -L/usr/src/usr.bin/ssh/sshd/../lib/obj -lssh -lutil -L/usr/src/usr.bin/ssh/sshd/../lib/obj -lssh -lutil -lcrypto -lutil -lz sshd.o: In function `main': sshd.c:(.text+0x4ae4): undefined reference to `do_authentication' monitor.o: In function `mm_answer_rsa_response': monitor.c:(.text+0xb18): undefined reference to `auth_rsa_verify_response' monitor.o: In function `mm_answer_rsa_challenge': monitor.c:(.text+0xd1b): undefined reference to `auth_rsa_generate_challenge' monitor.o: In function `mm_answer_rsa_keyallowed': monitor.c:(.text+0xf8a): undefined reference to `auth_rsa_key_allowed' monitor.o: In function `mm_answer_keyallowed': monitor.c:(.text+0x22e7): undefined reference to `auth_rhosts_rsa_key_allowed' collect2: ld returned 1 exit status *** Error 1 in sshd (<bsd.prog.mk>:87 'sshd') *** Error 1 in /usr/src/usr.bin/ssh (<bsd.subdir.mk>:48 'all') root@backup[/usr/src/usr.bin/ssh] (…) > On 20 Oct 2015, at 00:47, Joe S <[email protected]> wrote: > > I've just upgraded from 5.7 to 5.8 on amd64 and applied all of the errata > found at . > > I downloaded src.tar.gz and sys.tar.gz from > ftp5.usa.openbsd.org/pub/OpenBSD/5.8 and then applied all of the errata > (2015-10-18) from http://www.openbsd.org/errata58.html. > > I want to make a release, to deploy on other systems. I followed the > directions at http://www.openbsd.org/faq/faq5.html#Release. > > During "make release", the process fails during libc: > > ===> lib/libc > install -c -o root -g bin -m 444 tags /usr/dest/var/db/libc.tags > install -c -S -o root -g bin -m 600 libc.a /usr/dest/usr/lib/libc.a > ranlib -t /usr/dest/usr/lib/libc.a > chmod 444 /usr/dest/usr/lib/libc.a > install -c -S -o root -g bin -m 600 libc_p.a /usr/dest/usr/lib > ranlib -t /usr/dest/usr/lib/libc_p.a > chmod 444 /usr/dest/usr/lib/libc_p.a > install -c -S -o root -g bin -m 444 libc.so.80.1 /usr/dest/usr/lib > install: libc.so.80.1: No such file or directory > *** Error 71 in /usr/src/lib/libc (<bsd.lib.mk>:292 'realinstall') > *** Error 1 in /usr/src/lib (<bsd.subdir.mk>:48 'realinstall') > *** Error 1 in /usr/src (<bsd.subdir.mk>:48 'realinstall') > *** Error 1 in /usr/src/etc (Makefile:229 'distribution') > > Did I miss something, or is this a known issue? > > > OpenBSD 5.8 (GENERIC.MP) #1: Sun Oct 18 14:02:37 PDT 2015 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4259938304 (4062MB) > avail mem = 4126941184 (3935MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb920 (27 entries) > bios0: vendor Intel Corp. version "CCCDT10N.86A.0034.2012.0612.1520" date > 06/12/2012 > bios0: Intel Corporation D2500CC > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT APIC MCFG HPET > acpi0: wakeup devices SLT1(S4) PS2M(S4) PS2K(S4) UAR1(S3) UAR2(S3) UAR3(S4) > UAR4(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB7(S3) PXSX(S4) RP01(S4) > PXSX(S4) RP02(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Atom(TM) CPU D2500 @ 1.86GHz, 1867.05 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3, CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu0: 512KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges > cpu0: apic clock running at 133MHz > cpu0: mwait min=64, max=64, C-substates=0.1, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Atom(TM) CPU D2500 @ 1.86GHz, 1866.74 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3, CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu1: 512KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 8 > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 3 (P0P1) > acpiprt2 at acpi0: bus 2 (RP01) > acpiprt3 at acpi0: bus 1 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: SLPB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Atom D2000/N2000 Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel Atom D2000/N2000 Video" rev 0x09 > intagp at vga1 not configured > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi > pci1 at ppb0 bus 2 > em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > 00:22:4d:7b:81:bc > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi > pci2 at ppb1 bus 1 > em1 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > 00:22:4d:7b:81:b8 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 8 int 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 8 int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 8 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 8 int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 8 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci3 at ppb2 bus 3 > pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02 > ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1 > ahci0: port 0: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDP06, 2.0.> SCSI3 0/direct > fixed naa.5001b449e1e22e7f > sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 8 > int 19 > iic0 at ichiic0 > lm1 at iic0 addr 0x2d: W83627DHG > spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627UHG rev 0x32 > lm2 at wbsio0 port 0x290/8: W83627DHG > lm1: disabling sensors due to alias with lm2 > umass0 at uhub0 port 6 configuration 1 interface 0 "SanDisk Cruzer" rev > 2.00/2.01 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer, 2.01> SCSI4 0/direct fixed > serial.078155309218DB525F2E > sd1: 3819MB, 512 bytes/sector, 7821312 sectors > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Dell Dell USB > Keyboard" rev 1.10/3.01 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub3 port 1 configuration 1 interface 0 "American Power > Conversion Smart-UPS 1000 FW:UPS 09.2 / ID=18" rev 2.00/1.06 addr 2 > uhidev1: iclass 3/0, 146 report ids > upd0 at uhidev1 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (e8557099e975fb31.a) swap on sd0b dump on sd0b
