Right, this is what I did as well. Tested. Works much better than the previous config.
Any thoughts on monitoring the status of the ccd? Bobby Johnson On Wed, 2005-12-28 at 21:28 +0100, kami petersen wrote: > Nick Holland skrev: > > > (hint: you can do a CCD of just one disk). > > (hint 2: you can't use the same partition twice, it will generate an error). > > (hint 3: Errors can be your friend, they are not always to be avoided) > > warning, spoiler below: > > # > # /etc/ccd.conf > # Configuration file for concatenated disk devices > # > > # ccd ileave flags component devices > ccd0 16 CCDF_MIRROR /dev/sd2e /dev/sd3e > ccd0 16 none /dev/sd2e > ccd0 16 none /dev/sd3e > > > now shut down, unplug sd2 and boot. at your own risk. > > regards, > kami petersen
