Hello misc@,
I've installed a UPS (eaton ellipse 600) at a customer of mine, which
attaches as a upd(4) device without problems. When monitoring this
device with sensorsd it sporadically sends out emails about power
problems, even when there are no problems at that moment location.
When taking a closer look at the logs it appears that sensorsd regularly
reads wrong data from the device.
Is there a way to detect whether this issue is in the UPS or with the
driver?
I've placed an extra check on indicator0 with the shutdown command, so
there haven't been any untimely shutdowns yet, but it might be just a
matter of star and moon alignment before both percent0 and indicator0
are read wrong simultaniously.
Sincerely,
Martijn van Duren
$ sysctl hw.sensors.upd0
hw.sensors.upd0.indicator0=On (Charging), OK
hw.sensors.upd0.indicator1=Off (Discharging), OK
hw.sensors.upd0.indicator2=Off (NeedReplacement), OK
hw.sensors.upd0.indicator3=Off (ShutdownImminent), OK
hw.sensors.upd0.indicator4=On (ACPresent), OK
hw.sensors.upd0.indicator5=Off (Overload), OK
hw.sensors.upd0.percent0=100.00% (RemainingCapacity), OK
hw.sensors.upd0.percent1=100.00% (FullChargeCapacity), OK
hw.sensors.upd0.timedelta0=0.000000 secs (RunTimeToEmpty), OK
$ zgrep sensorsd /var/log/daemon*
/var/log/daemon:Nov 4 07:00:20 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon:Nov 4 08:58:24 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon:Nov 4 08:58:44 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon:Nov 4 09:31:37 server sensorsd[1790]: startup, system
has 40 sensors
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.indicator0:
On, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.indicator1:
Off, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.indicator2:
Off, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.indicator3:
Off, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.indicator4:
On, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.indicator5:
Off, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.percent0:
100.00%, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.percent0:
within limits: 100.00%
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.percent1:
100.00%, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]: upd0.timedelta0:
0.000000 secs, OK
/var/log/daemon:Nov 4 09:31:52 server sensorsd[10211]:
softraid0.drive0: online, OK
/var/log/daemon:Nov 4 09:32:31 server sensorsd[15990]: startup, system
has 40 sensors
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.indicator0:
On, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.indicator1:
Off, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.indicator2:
Off, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.indicator3:
Off, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.indicator4:
On, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.indicator5:
Off, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.percent0:
100.00%, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.percent0:
within limits: 100.00%
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.percent1:
100.00%, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]: upd0.timedelta0:
0.000000 secs, OK
/var/log/daemon:Nov 4 09:32:46 server sensorsd[15230]:
softraid0.drive0: online, OK
/var/log/daemon.0.gz:Nov 3 21:47:35 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.0.gz:Nov 3 21:47:55 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.0.gz:Nov 3 22:48:57 server sensorsd[5]:
upd0.indicator0: On, UNKNOWN
/var/log/daemon.0.gz:Nov 3 22:48:57 server sensorsd[5]:
upd0.indicator1: Off, UNKNOWN
/var/log/daemon.0.gz:Nov 3 22:48:57 server sensorsd[5]:
upd0.indicator2: Off, UNKNOWN
/var/log/daemon.0.gz:Nov 3 22:48:57 server sensorsd[5]:
upd0.indicator3: Off, UNKNOWN
/var/log/daemon.0.gz:Nov 3 22:48:57 server sensorsd[5]:
upd0.indicator4: On, UNKNOWN
/var/log/daemon.0.gz:Nov 3 22:48:57 server sensorsd[5]:
upd0.indicator5: Off, UNKNOWN
/var/log/daemon.0.gz:Nov 3 22:49:17 server sensorsd[5]:
upd0.indicator0: On, OK
/var/log/daemon.0.gz:Nov 3 22:49:17 server sensorsd[5]:
upd0.indicator1: Off, OK
/var/log/daemon.0.gz:Nov 3 22:49:17 server sensorsd[5]:
upd0.indicator2: Off, OK
/var/log/daemon.0.gz:Nov 3 22:49:17 server sensorsd[5]:
upd0.indicator3: Off, OK
/var/log/daemon.0.gz:Nov 3 22:49:17 server sensorsd[5]:
upd0.indicator4: On, OK
/var/log/daemon.0.gz:Nov 3 22:49:17 server sensorsd[5]:
upd0.indicator5: Off, OK
/var/log/daemon.0.gz:Nov 3 23:49:24 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.0.gz:Nov 3 23:49:44 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.0.gz:Nov 4 03:19:59 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.0.gz:Nov 4 03:20:19 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.0.gz:Nov 4 05:01:01 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.0.gz:Nov 4 05:01:21 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.0.gz:Nov 4 06:13:14 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.0.gz:Nov 4 06:13:34 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.0.gz:Nov 4 06:53:04 server sensorsd[5]:
upd0.indicator2: Off, UNKNOWN
/var/log/daemon.0.gz:Nov 4 06:53:04 server sensorsd[5]:
upd0.indicator3: Off, UNKNOWN
/var/log/daemon.0.gz:Nov 4 06:53:04 server sensorsd[5]:
upd0.indicator5: Off, UNKNOWN
/var/log/daemon.0.gz:Nov 4 06:53:24 server sensorsd[5]:
upd0.indicator2: Off, OK
/var/log/daemon.0.gz:Nov 4 06:53:24 server sensorsd[5]:
upd0.indicator3: Off, OK
/var/log/daemon.0.gz:Nov 4 06:53:24 server sensorsd[5]:
upd0.indicator5: Off, OK
/var/log/daemon.0.gz:Nov 4 07:00:00 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.1.gz:Nov 3 13:36:52 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.1.gz:Nov 3 13:37:12 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.1.gz:Nov 3 14:30:33 server sensorsd[5]:
upd0.indicator0: On, UNKNOWN
/var/log/daemon.1.gz:Nov 3 14:30:33 server sensorsd[5]:
upd0.indicator1: Off, UNKNOWN
/var/log/daemon.1.gz:Nov 3 14:30:33 server sensorsd[5]:
upd0.indicator4: On, UNKNOWN
/var/log/daemon.1.gz:Nov 3 14:30:38 server sensorsd[5]: upd0.percent0:
100.00%, UNKNOWN
/var/log/daemon.1.gz:Nov 3 14:30:38 server sensorsd[5]:
upd0.timedelta0: 0.000000 secs, UNKNOWN
/var/log/daemon.1.gz:Nov 3 14:30:58 server sensorsd[5]:
upd0.indicator0: On, OK
/var/log/daemon.1.gz:Nov 3 14:30:58 server sensorsd[5]:
upd0.indicator1: Off, OK
/var/log/daemon.1.gz:Nov 3 14:30:58 server sensorsd[5]:
upd0.indicator4: On, OK
/var/log/daemon.1.gz:Nov 3 14:30:58 server sensorsd[5]: upd0.percent0:
100.00%, OK
/var/log/daemon.1.gz:Nov 3 14:30:58 server sensorsd[5]:
upd0.timedelta0: 0.000000 secs, OK
/var/log/daemon.1.gz:Nov 3 15:34:16 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.1.gz:Nov 3 15:34:36 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.1.gz:Nov 3 16:24:02 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.1.gz:Nov 3 16:24:22 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.1.gz:Nov 3 17:41:46 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.1.gz:Nov 3 17:42:06 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.2.gz:Nov 3 08:37:22 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.2.gz:Nov 3 08:37:47 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.2.gz:Nov 3 12:07:22 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.2.gz:Nov 3 12:07:47 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.3.gz:Nov 2 20:03:03 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.3.gz:Nov 2 20:03:23 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.3.gz:Nov 2 21:37:34 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.3.gz:Nov 2 21:37:54 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.3.gz:Nov 2 21:45:05 server sensorsd[5]:
upd0.indicator2: Off, UNKNOWN
/var/log/daemon.3.gz:Nov 2 21:45:05 server sensorsd[5]:
upd0.indicator3: Off, UNKNOWN
/var/log/daemon.3.gz:Nov 2 21:45:05 server sensorsd[5]:
upd0.indicator5: Off, UNKNOWN
/var/log/daemon.3.gz:Nov 2 21:45:30 server sensorsd[5]:
upd0.indicator2: Off, OK
/var/log/daemon.3.gz:Nov 2 21:45:30 server sensorsd[5]:
upd0.indicator3: Off, OK
/var/log/daemon.3.gz:Nov 2 21:45:30 server sensorsd[5]:
upd0.indicator5: Off, OK
/var/log/daemon.3.gz:Nov 3 00:33:35 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.3.gz:Nov 3 00:34:00 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.3.gz:Nov 3 01:14:25 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.3.gz:Nov 3 01:14:45 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.3.gz:Nov 3 02:41:55 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.3.gz:Nov 3 02:42:15 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.3.gz:Nov 3 04:27:43 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.3.gz:Nov 3 04:28:03 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.3.gz:Nov 3 06:07:39 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.3.gz:Nov 3 06:07:59 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.3.gz:Nov 3 07:49:16 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.3.gz:Nov 3 07:49:41 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.4.gz:Nov 2 06:40:09 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.4.gz:Nov 2 06:40:29 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.4.gz:Nov 2 09:53:57 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.4.gz:Nov 2 09:54:17 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.4.gz:Nov 2 12:29:05 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.4.gz:Nov 2 12:29:25 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.4.gz:Nov 2 13:50:24 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.4.gz:Nov 2 13:50:49 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.4.gz:Nov 2 17:34:41 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.4.gz:Nov 2 17:35:01 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
/var/log/daemon.4.gz:Nov 2 18:04:34 server sensorsd[5]: upd0.percent0:
exceeds limits: 19.00% is below 20.00%
/var/log/daemon.4.gz:Nov 2 18:04:54 server sensorsd[5]: upd0.percent0:
within limits: 100.00%
$ cat /etc/sensorsd.conf
hw.sensors.upd0.percent0:low=20%:command=/etc/sensorsd/ups.sh shutdown
hw.sensors.upd0.indicator0:command=/etc/sensorsd/ups.sh charging
hw.sensors.upd0.indicator1:command=/etc/sensorsd/ups.sh discharging
$ dmesg
OpenBSD 5.8 (GENERIC.MP) #1: Wed Oct 14 19:38:08 CEST 2015
jas...@stable-58-amd64.mtier.org:/binpatchng/work-binpatch58-amd64/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2026598400 (1932MB)
avail mem = 1961275392 (1870MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7ad34018 (93 entries)
bios0: vendor FUJITSU // American Megatrends Inc. version "V4.6.5.4
R1.25.0 for D3230-A1x" date 06/24/2014
bios0: FUJITSU ESPRIMO P420
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT SSDT SSDT MCFG HPET SSDT SSDT MSDM SLIC
acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4)
RP03(S4) PXSX(S4) RP04(S4) GLAN(S4) EHC1(S4) EHC2(S4) XHC_(S4) HDEF(S4)
PEG0(S4) PEGP(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz, 2993.54 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,XSAVE,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,ERMS,INVPCID,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz, 2993.07 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,XSAVE,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,ERMS,INVPCID,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP03)
acpiprt3 at acpi0: bus 6 (RP04)
acpiprt4 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2900, 2700, 2600, 2400,
2300, 2100, 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x06
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before
writing to 100000
inteldrm0: 1280x1024
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8
int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek/0x0671
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 vendor "ASMedia", unknown product 0x1182
rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 3 function 0 vendor "ASMedia", unknown product 0x1182
rev 0x00: msi
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
(0x2c80), msi, address 00:13:3b:0f:e2:fb
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb4 at pci3 dev 7 function 0 vendor "ASMedia", unknown product 0x1182
rev 0x00: msi
pci5 at ppb4 bus 5
re1 at pci5 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
(0x2c80), msi, address 00:13:3b:0f:e2:fc
rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb5 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd4: msi
pci6 at ppb5 bus 6
re2 at pci6 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G
(0x4c00), msi, address 90:1b:0e:3b:74:c5
rgephy2 at re2 phy 7: RTL8251 PHY, rev. 0
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8
int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H81 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
ahci0: port 4: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA DT01ACA1, MS2O> SCSI3
0/direct fixed naa.5000039fe1c16fd5
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <TSSTcorp, CDDVDW SH-216DB, FT00> ATAPI
5/cdrom removable
sd1 at scsibus1 targ 4 lun 0: <ATA, TOSHIBA DT01ACA1, MS2O> SCSI3
0/direct fixed naa.5000039fe1c27aba
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic
8 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800
"Intel 8 Series Thermal" rev 0x04 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub0 port 1 configuration 1 interface 0 "MGE OPS SYSTEMS
ELLIPSE" rev 1.10/42.41 addr 2
uhidev0: iclass 3/0, 33 report ids
upd0 at uhidev0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Microsoft Microsoft
3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
uhub4 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct
fixed
sd2: 953866MB, 512 bytes/sector, 1953519408 sectors
root on sd2a (1d604292989965a3.a) swap on sd2b dump on sd2b
