Hi list,
for my laptop, i created a trunk(4) interface with em0 and iwn0 as
members. IPv6 is provided on a separate vlan for now. Without trunking
the interfaces, the vlan interface comes up and everything's working fine:
~ $ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
em0: flags=18843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,MPSAFE> mtu 1500
lladdr 3c:97:0e:ea:61:d1
priority: 0
groups: egress
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet 192.168.45.27 netmask 0xfffff000 broadcast 192.168.47.255
iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr e0:9d:31:5f:e0:d4
priority: 4
groups: wlan
media: IEEE802.11 autoselect (HT-MCS7 mode 11n)
status: no network
ieee80211: nwid trvnet wpakey <not displayed> wpaprotos
wpa1,wpa2 wpaakms psk wpaciphers tkip,ccmp wpagroupcipher tkip
enc0: flags=0<>
priority: 0
groups: enc
status: active
vlan6: flags=0<> mtu 1500
lladdr 00:00:00:00:00:00
priority: 0
groups: vlan
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144
priority: 0
groups: pflog
~ $ sudo /bin/sh /etc/netstart vlan6
~ $ ifconfig vlan6
vlan6: flags=208843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF6>
mtu 1500
lladdr 3c:97:0e:ea:61:d1
priority: 0
vlan: 6 parent interface: em0
groups: vlan egress
status: active
inet6 fe80::3e97:eff:feea:61d1%vlan6 prefixlen 64 scopeid 0x6
inet6 2001:920:1846:1dc0:3e97:eff:feea:61d1 prefixlen 64
autoconf pltime 604784 vltime 2591984
inet6 2001:920:1846:1dc0:49c:5dec:15c2:dc16 prefixlen 64
autoconf autoconfprivacy pltime 86366 vltime 604784
If the interface em0 is member of the trunk interface, the vlan
interface doesn't get configured:
~ $ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
em0:
flags=18b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,MPSAFE>
mtu 1500
lladdr 3c:97:0e:ea:61:d1
priority: 0
trunk: trunkdev trunk0
media: Ethernet autoselect (1000baseT full-duplex)
status: active
iwn0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 3c:97:0e:ea:61:d1
priority: 4
trunk: trunkdev trunk0
groups: wlan
media: IEEE802.11 autoselect (HT-MCS0 mode 11n)
status: active
ieee80211: nwid trvnet chan 48 bssid 68:9c:e2:f4:a3:2f -55dBm
wpakey <not displayed> wpaprotos wpa1,wpa2 wpaakms psk wpaciphers
tkip,ccmp wpagroupcipher tkip
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144
priority: 0
groups: pflog
trunk0: flags=208843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF6>
mtu 1500
lladdr 3c:97:0e:ea:61:d1
priority: 0
trunk: trunkproto failover
trunkport iwn0
trunkport em0 master,active
groups: trunk egress
media: Ethernet autoselect
status: active
inet6 fe80::3e97:eff:feea:61d1%trunk0 prefixlen 64 scopeid 0x8
inet 192.168.43.160 netmask 0xfffff000 broadcast 192.168.47.255
~ $ sudo /bin/sh /etc/netstart vlan6
ifconfig: SIOCSETVLAN: Protocol not supported
ifconfig: SIOCIFAFATTACH: Invalid argument
ifconfig: SIOCSIFXFLAGS: Invalid argument
~ $ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
em0:
flags=18b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,MPSAFE>
mtu 1500
lladdr 3c:97:0e:ea:61:d1
priority: 0
trunk: trunkdev trunk0
media: Ethernet autoselect (1000baseT full-duplex)
status: active
iwn0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 3c:97:0e:ea:61:d1
priority: 4
trunk: trunkdev trunk0
groups: wlan
media: IEEE802.11 autoselect (HT-MCS0 mode 11n)
status: active
ieee80211: nwid trvnet chan 48 bssid 68:9c:e2:f4:a3:2f -54dBm
wpakey <not displayed> wpaprotos wpa1,wpa2 wpaakms psk wpaciphers
tkip,ccmp wpagroupcipher tkip
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144
priority: 0
groups: pflog
trunk0: flags=208843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF6>
mtu 1500
lladdr 3c:97:0e:ea:61:d1
priority: 0
trunk: trunkproto failover
trunkport iwn0
trunkport em0 master,active
groups: trunk egress
media: Ethernet autoselect
status: active
inet6 fe80::3e97:eff:feea:61d1%trunk0 prefixlen 64 scopeid 0x8
inet 192.168.43.160 netmask 0xfffff000 broadcast 192.168.47.255
vlan6: flags=0<> mtu 1500
lladdr 00:00:00:00:00:00
priority: 0
groups: vlan
The vlan interface should have em0 as vlandevice, as vlan6 is provided
only on wire for now:
~ $ more /etc/hostname.vlan6
vlan 6 vlandev em0
inet6 autoconf
I know there were several major changes to the network stack and the
drivers but is this configuration not permitted anymore?
dmesg is at the end.
Cheers,
Marc
dmesg:
OpenBSD 5.9 (GENERIC.MP) #1: Sun Feb 7 13:54:23 CET 2016
r...@denkbrett.home:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16845565952 (16065MB)
avail mem = 16330833920 (15574MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (68 entries)
bios0: vendor LENOVO version "G4ETA4WW (2.64 )" date 03/31/2015
bios0: LENOVO 24297TG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT
FPDT ASF! UEFI UEFI MSDM SSDT SSDT UEFI DBG2
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.54 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.11 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.11 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.11 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 4 (EXP3)
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 103 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "45N1173" serial 4406 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300,
2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
3c:97:0e:ea:61:d1
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16
sdmmc0 at sdhc0
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34:
msi, MIMO 2T2R, MoW, address e0:9d:31:5f:e0:d4
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, EXT0> SCSI3
0/direct fixed naa.50025388a00ec183
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DS8A8SH, KU54> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub5 at uhub4 port 8 "Lenovo product 0x100a" rev 2.00/0.00 addr 3
uhidev0 at uhub5 port 5 configuration 1 interface 0 "Cherry
Mikroschalter product 0x0011" rev 2.00/1.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 6 configuration 1 interface 0 "Logitech Lenovo USB
Optical Mouse" rev 2.00/63.00 addr 5
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse2 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 476937MB, 512 bytes/sector, 976767473 sectors
root on sd1a (a1807c1b647bbfe7.a) swap on sd1b dump on sd1b
