Hi all,
first boot of OpenBSD amd64 snapshot on Oracle VM for x86 version 3.2.8
after install
OpenBSD 6.0-beta (GENERIC) #1976: Sat May 28 19:35:41 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 520093696 (496MB)
avail mem = 499953664 (476MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xeb01f (12 entries)
bios0: vendor Xen version "4.1.3OVM" date 02/22/2014
bios0: Xen HVM domU
acpi0 at bios0: rev 2
acpi0: sleep states S5
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 48 pins
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz, 2000.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,HV,NXE,LON
G,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
"PNP0F13" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0400" at acpi0 not configured
"ACPI0007" at acpi0 not configured
pvbus0 at mainbus0: Xen 4.1
xen0 at pvbus0: features 0x705, 64 grant table frames, event channel 3
"vfb" at xen0: device/vfb/0 not configured
"vbd" at xen0: device/vbd/51712 not configured
xnf0 at xen0: backend 0, event channel 5, address 00:21:f6:00:00:1f
"console" at xen0: device/console/0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 51200MB, 104857600 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
pciide0: channel 1 disabled (no drives)
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x01: SMBus
disabled
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xspd0 at pci0 dev 3 function 0 "XenSource Platform Device" rev 0x01
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (bc3b82f955455994.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
# pcidump -v
Domain /dev/pci0:
0:0:0: Intel 82441FX
0x0000: Vendor ID: 8086 Product ID: 1237
0x0004: Command: 0004 Status: 0000
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1af4 Product ID: 1100
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:1:0: Intel 82371SB ISA
0x0000: Vendor ID: 8086 Product ID: 7000
0x0004: Command: 0007 Status: 0200
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 00
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1af4 Product ID: 1100
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:1:1: Intel 82371SB IDE
0x0000: Vendor ID: 8086 Product ID: 7010
0x0004: Command: 0005 Status: 0280
0x0008: Class: 01 Subclass: 01 Interface: 80 Revision: 00
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x0000c200/0x0010
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 5853 Product ID: 0001
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:1:3: Intel 82371AB Power
0x0000: Vendor ID: 8086 Product ID: 7113
0x0004: Command: 0004 Status: 0000
0x0008: Class: 06 Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1af4 Product ID: 1100
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0:2:0: Cirrus Logic CL-GD5446
0x0000: Vendor ID: 1013 Product ID: 00b8
0x0004: Command: 0007 Status: 0000
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 00
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR mem prefetchable 32bit addr: 0xf0000000/0x02000000
0x0014: BAR mem 32bit addr: 0xf3000000/0x00001000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 5853 Product ID: 0001
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:3:0: XenSource Platform Device
0x0000: Vendor ID: 5853 Product ID: 0001
0x0004: Command: 0007 Status: 0000
0x0008: Class: ff Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR io addr: 0x0000c000/0x0100
0x0014: BAR mem prefetchable 32bit addr: 0xf2000000/0x01000000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 5853 Product ID: 0001
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
# sysctl hw
hw.machine=amd64
hw.model=Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz
hw.ncpu=1
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0:bc3b82f955455994,fd0:,fd1:
hw.diskcount=3
hw.cpuspeed=2000
hw.vendor=Xen
hw.product=HVM domU
hw.version=4.1.3OVM
hw.serialno=0004fb00-0006-0000-670f-486e2d9de51c
hw.uuid=0004fb00-0006-0000-670f-486e2d9de51c
hw.physmem=520093696
hw.usermem=520081408
hw.ncpufound=1
hw.allowpowerdown=1
#
# atactl wd0c identify
Model: QEMU HARDDISK, Rev: 0.10.2, Serial #: QM00001
Device type: ATA, fixed
Cylinders: 16383, heads: 16, sec/track: 63, total sectors: 104857600
Device capabilities:
IORDY operation
Device supports the following standards:
ATA-4 ATA-5 ATA-6 ATA-7
Device supports the following command sets:
NOP command
Write cache
Flush Cache Ext command
Flush Cache command
48bit address feature set
Device has enabled the following command sets/features:
NOP command
Flush Cache Ext command
Flush Cache command
48bit address feature set
#
Can provide acpidump or other details for people interested (already
trying contact eg. Mike).
Troubles:
1) After initial install system shutdown in Java VNC console, but not
in OVM Manager so abort of Stopping job and then Kill of domU is needed
2) After first reboot Java VNC console is not able to attach to domU.
It has own troubles even for other guests and hopefully it will go away
as we will be soon on 3.3.x where is noVNC with HTML5 + Canvas used
instead
3) Of course there is not OpenBSD in available operating systems so
instead None is set
4) This is output when HVM as domain type used
PS: I am not subscribed to misc@ so please contact/response directly to
my mail.
Thanks a lot
Keep up the wonderful job with OpenBSD
