Stuart Henderson wrote:
> On 2016-05-26, Predrag Punosevac <[email protected]> wrote:
> > Right now at Carnegie Mellon University I use Intel NUC NUC5CPYH
> ..
> > I have tested OpenBSD on it but without X.
>
> On some NUC models everything works very well. On others there are some
> problems like X not working. Video is the usual problem, try to identify
> what it has in as much detail as possible and try and find someone who
> used the same video device.
>
Sorry for the very slow replay to this message. Please see the dmesg for
the NUC. X works perfectly all 2560x1440 of it using HDMI cable. I
didn't connect the machine to the Internet so you will see that firmware
for WiFi on the bottom of dmesg is missing.
Enjoy,
Predrag
OpenBSD 6.0-beta (RAMDISK_CD) #1954: Thu Jun 2 08:43:13 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8489787392 (8096MB)
avail mem = 8230637568 (7849MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xedcb0 (49 entries)
bios0: vendor Intel Corp. version "PYBSWCEL.86A.0047.2015.1123.0950" date
11/23/2015
bios0: Intel Corporation NUC5CPYB
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1600.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,
NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiec0 at acpi0: not present
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
"ITE8713" at acpi0 not configured
"INT33FF" at acpi0 not configured
"BCM43241" at acpi0 not configured
"ADMA22A8" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"INT33FF" at acpi0 not configured
"INT33FF" at acpi0 not configured
"INT33FF" at acpi0 not configured
"INT3398" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x21
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x21
vga1: aperture needed
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
sdhc0 at pci0 dev 18 function 0 vendor "Intel", unknown product 0x2296 rev
0x21: apic 1 int 18
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x21: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSC2BW12, RG21> SCSI3 0/direct
fixed naa.55cd2e414c9899c7
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Braswell SIO DMA" rev 0x21 at pci0 dev 24 function 0 not configured
"Intel Braswell SIO I2C" rev 0x21 at pci0 dev 24 function 6 not configured
"Intel Braswell SIO I2C" rev 0x21 at pci0 dev 24 function 7 not configured
"Intel Braswell TXE" rev 0x21 at pci0 dev 26 function 0 not configured
"Intel Braswell HD Audio" rev 0x21 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x21: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x21: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x81,
msi
ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x21: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400),
msi, address b8:ae:ed:7f:a8:d3
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
"Intel Braswell PCU LPC" rev 0x21 at pci0 dev 31 function 0 not configured
"Intel Braswell SMBus" rev 0x21 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
sdmmc0: can't enable card
umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk Cruzer Fit" rev
2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.00> SCSI4 0/direct
removable serial.07815571290116123433
sd1: 7632MB, 512 bytes/sector, 15630336 sectors
uhidev0 at uhub0 port 3 configuration 1 interface 0 "DELL Dell USB Entry
Keyboard" rev 1.10/1.78 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay1
uhidev1 at uhub0 port 4 configuration 1 interface 0 "Logitech Optical USB
Mouse" rev 2.00/3.40 addr 4
uhidev1: iclass 3/1
uhid at uhidev1 not configured
uhub1 at uhub0 port 5 "vendor 0x05e3 USB2.0 Hub" rev 2.00/32.98 addr 5
"vendor 0x8087 product 0x0a2a" rev 2.00/0.01 addr 6 at uhub1 port 1 not
configured
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
syncing disks...
OpenBSD 6.0-beta (GENERIC.MP) #2165: Thu Jun 2 08:37:59 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8489787392 (8096MB)
avail mem = 8227860480 (7846MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xedcb0 (49 entries)
bios0: vendor Intel Corp. version "PYBSWCEL.86A.0047.2015.1123.0950" date
11/23/2015
bios0: Intel Corporation NUC5CPYB
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
SSDT
acpi0: wakeup devices PS2K(S3) PS2M(S3) BRCM(S0) BRC1(S0) XHC1(S4) HDEF(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1680.34 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,
NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 80MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1600.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,
NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: CLK0, resource for CAMD
acpipwrres2 at acpi0: CLK0
acpipwrres3 at acpi0: CLK1, resource for CAM3
acpipwrres4 at acpi0: USBC, resource for XHC1
acpipwrres5 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
"ITE8713" at acpi0 not configured
chvgpio0 at acpi0: GPO1 uid 2 addr 0xfed88000/0x8000 irq 48, 59 pins
"BCM43241" at acpi0 not configured
"ADMA22A8" at acpi0 not configured
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
chvgpio1 at acpi0: GPO0 uid 1 addr 0xfed80000/0x8000 irq 49, 56 pins
chvgpio2 at acpi0: GPO2 uid 3 addr 0xfed90000/0x8000 irq 50, 24 pins
chvgpio3 at acpi0: GPO3 uid 4 addr 0xfed98000/0x8000 irq 91, 55 pins
"INT3398" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
cpu0: Enhanced SpeedStep 1680 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280,
1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x21
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x21
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
sdhc0 at pci0 dev 18 function 0 vendor "Intel", unknown product 0x2296 rev
0x21: apic 1 int 18
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x21: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2BW12, RG21> SCSI3 0/direct
fixed naa.55cd2e414c9899c7
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Braswell SIO DMA" rev 0x21 at pci0 dev 24 function 0 not configured
"Intel Braswell SIO I2C" rev 0x21 at pci0 dev 24 function 6 not configured
"Intel Braswell SIO I2C" rev 0x21 at pci0 dev 24 function 7 not configured
"Intel Braswell TXE" rev 0x21 at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Braswell HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0283, Intel/0x2883, using Realtek/0x0283
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x21: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x21: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x81,
msi
ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x21: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400),
msi, address b8:ae:ed:7f:a8:d3
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x21
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x21: apic 1 int
18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sdmmc0: can't enable card
umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk Cruzer Fit" rev
2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.00> SCSI4 0/direct
removable serial.07815571290116123433
sd1: 7632MB, 512 bytes/sector, 15630336 sectors
uhidev0 at uhub0 port 3 configuration 1 interface 0 "DELL Dell USB Entry
Keyboard" rev 1.10/1.78 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 4 configuration 1 interface 0 "Logitech Optical USB
Mouse" rev 2.00/3.40 addr 4
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub1 at uhub0 port 5 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 5
ugen0 at uhub1 port 1 "Intel product 0x0a2a" rev 2.00/0.01 addr 6
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (4f56368d40d00128.a) swap on sd0b dump on sd0b
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
> > NUC is completely silent
>
> Hmm. I am trying to figure out a way to make mine a bit quieter.
> I wouldn't say it's _loud_, but definitely not silent.
>
> > I am not sure what is electric consumption of current Thin
> > Clients but I would be surprised to learn that it is much lower than
> > 10W.
>
> The Intel compute sticks are pretty low power. Somewhere around
> 2.5W idle and around 9W under heavy CPU and GPU load. I'm not sure
> how far along video on those is yet though. (And by the time you
> add a hub and usb ethernet if you want to use an input device and
> don't want to rely on wifi, the amps start adding up..)
