On Wed, Jun 15, 2016 at 09:47:35AM +0200, Bodie wrote: > Hi all, > > trying to find if OpenBSD will be usable on this laptop via USB live OpenBSD > 6.0 Beta install. There was some fight with old USB flash and EFI, but is > already resolved so that I can provide some outputs and info. > > 1) VGA works including 3D > 2) USB camera is detected (I have firmware on flash disk), but video(1) does > not work with it, will play more later on > 3) ACPI/apm seems reasonable , but reported battery life is only around 231 > minutes (when regular is around 8 hours), except of boot CPU other threads > have problems with identification, but scaling and load is ok and acpitz5
This probably happens only when booting off battery, right? (Eg, the "failed to identify" messages). If you boot when plugged in to AC, I bet it doesn't do that. > zone is showing somewhat suspicious high temperature right from start > > hw.sensors.cpu0.temp0=42.00 degC > hw.sensors.acpitz0.temp0=43.00 degC (zone temperature) > hw.sensors.acpitz1.temp0=0.00 degC (zone temperature) > hw.sensors.acpitz2.temp0=37.00 degC (zone temperature) > hw.sensors.acpitz3.temp0=40.00 degC (zone temperature) > hw.sensors.acpitz4.temp0=35.00 degC (zone temperature) > hw.sensors.acpitz5.temp0=84.00 degC (zone temperature) > hw.sensors.acpitz6.temp0=0.00 degC (zone temperature) > hw.sensors.acpitz7.temp0=0.00 degC (zone temperature) > hw.sensors.acpibat0.volt0=7.60 VDC (voltage) > hw.sensors.acpibat0.volt1=8.57 VDC (current voltage) > hw.sensors.acpibat0.current0=1.21 A (rate) > hw.sensors.acpibat0.amphour0=4.66 Ah (last full capacity) > hw.sensors.acpibat0.amphour1=0.20 Ah (warning capacity) > hw.sensors.acpibat0.amphour2=0.10 Ah (low capacity) > hw.sensors.acpibat0.amphour3=4.66 Ah (remaining capacity), OK > hw.sensors.acpibat0.amphour4=4.66 Ah (design capacity) > hw.sensors.acpibat0.raw0=1 (battery full), OK > hw.sensors.acpiac0.indicator0=Off (power supply) > hw.sensors.acpibtn1.indicator0=On (lid open) > > $ cat apm.txt > Battery state: high, 100% remaining, 231 minutes life estimate > A/C adapter state: not connected > Performance adjustment mode: auto (500 MHz) > $ > > Can provide acpidump directly from OpenBSD later on if some developer will > be interested. Right now I have them only from Windows via iasl in .dat and > .dsl format > > 4) Network devices are detected, but iwm0 does not work properly (do not > know if firmware or driver related). I am able to associate with AP, but > dhclient is not getting any lease. Thought it may be related to 802.11n > usage as my AP transmit in yet unsupported way by OpenBSD so I switched to > 802.11g only, but the problem with dhclient was same. No errors either from > dhclient or firmware of iwm0 during those steps > > 5) dmesg of 1st boot after install > > OpenBSD 6.0-beta (GENERIC.MP) #2165: Thu Jun 2 08:37:59 MDT 2016 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8203530240 (7823MB) > avail mem = 7950278656 (7581MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x9ba3f000 (33 entries) > bios0: vendor Hewlett-Packard version "M77 Ver. 01.11" date 01/18/2016 > bios0: Hewlett-Packard HP EliteBook Folio 1020 G1 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT SLIC MSDM FPDT BGRT > SSDT SSDT SSDT SSDT SSDT SSDT ASF! DMAR > acpi0: wakeup devices LANC(S0) EHC1(S0) XHC_(S0) PCIB(S5) RP03(S0) NIC_(S0) > RP04(S5) WNIC(S5) HST1(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 1097.63 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST > ,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AV > X2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 1097.46 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST > ,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AV > X2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: failed to identify > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 1097.46 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST > ,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AV > X2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: failed to identify > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 1097.46 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST > ,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AV > X2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: failed to identify > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus -1 (PEGP) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP04) > acpiprt3 at acpi0: bus 3 (RP05) > acpiprt4 at acpi0: bus -1 (RP07) > acpiprt5 at acpi0: bus -1 (RP08) > acpiprt6 at acpi0: bus 0 (PCI0) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: APPR, resource for HDEF > acpipwrres1 at acpi0: COMP, resource for COM1 > acpipwrres2 at acpi0: LPP_, resource for LPT0 > acpipwrres3 at acpi0: WRST > acpipwrres4 at acpi0: PXP5, resource for RP05 > acpitz0 at acpi0: critical temperature is 128 degC > acpitz1 at acpi0: critical temperature is 128 degC > acpitz2 at acpi0: critical temperature is 128 degC > acpitz3 at acpi0: critical temperature is 128 degC > acpitz4 at acpi0: critical temperature is 128 degC > acpitz5 at acpi0: critical temperature is 128 degC > acpitz6 at acpi0: critical temperature is 128 degC > acpitz7 at acpi0: critical temperature is 128 degC > "HPQ6001" at acpi0 not configured > "MCHP85D9" at acpi0 not configured > "PNP0A06" at acpi0 not configured > "HPQ8002" at acpi0 not configured > "SYN3018" at acpi0 not configured > acpibat0 at acpi0: BAT0 model "Primary" serial XXXX 2015/07/07 type LIon oem > "Hewlett-Packard" > acpiac0 at acpi0: AC unit online > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: LID_ > "PNP0C14" at acpi0 not configured > "IFX0102" at acpi0 not configured > "INT3397" at acpi0 not configured > "INT340E" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD01 > cpu0: Enhanced SpeedStep 1097 MHz: speeds: 1401, 1400, 1300, 1200, 1100, > 1000, 900, 800, 700, 600, 500 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5300" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1920x1080 > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi > xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address MAC > azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi > azalia1: codecs: Realtek/0x0286 > audio0 at azalia1 > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi > pci2 at ppb1 bus 2 > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x48, > msi > ppb2 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi > pci3 at ppb2 bus 3 > rtsx0 at pci3 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi > sdmmc0 at rtsx0: 4-bit > ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 0 int 17 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 > ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI > 1.3 > ahci0: port 3: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 3 lun 0: <ATA, SAMSUNG MZNLN256, EMT2> SCSI3 0/direct > fixed naa.SN > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 0 > int 18 > iic0 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > efifb at mainbus0 not configured > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Razer Razer Abyssus" > rev 2.00/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 7 buttons, Z dir > wsmouse1 at ums0 mux 0 > umass0 at uhub0 port 3 configuration 1 interface 0 "Verbatim STORE N GO" rev > 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > sd1 at scsibus2 targ 1 lun 0: <Verbatim, STORE N GO, 5.00> SCSI2 0/direct > removable serial.SN > sd1: 7457MB, 512 bytes/sector, 15273600 sectors > ugen0 at uhub0 port 4 "Intel product 0x0a2a" rev 2.01/0.01 addr 4 > ugen1 at uhub0 port 5 "Validity Sensors product 0x003f" rev 1.10/1.04 addr 5 > uvideo0 at uhub0 port 7 configuration 1 interface 0 "Chicony HP HD Webcam" > rev 2.00/32.60 addr 6 > video0 at uvideo0 > uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd1a (SN.a) swap on sd1b dump on sd1b > iwm0: could not read firmware iwm-7265-16 (error 2) > iwm0: failed to load init firmware > scsibus2 at umass0: 2 targets, initiator 0 > > 6) dmesg of 2nd boot with firmware for uvideo and iwm installed > > OpenBSD 6.0-beta (GENERIC.MP) #2165: Thu Jun 2 08:37:59 MDT 2016 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8203530240 (7823MB) > avail mem = 7950278656 (7581MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x9ba3f000 (33 entries) > bios0: vendor Hewlett-Packard version "M77 Ver. 01.11" date 01/18/2016 > bios0: Hewlett-Packard HP EliteBook Folio 1020 G1 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT SLIC MSDM FPDT BGRT > SSDT SSDT SSDT SSDT SSDT SSDT ASF! DMAR > acpi0: wakeup devices LANC(S0) EHC1(S0) XHC_(S0) PCIB(S5) RP03(S0) NIC_(S0) > RP04(S5) WNIC(S5) HST1(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 1097.66 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST > ,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AV > X2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 1097.46 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST > ,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AV > X2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: failed to identify > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 1097.46 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST > ,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AV > X2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: failed to identify > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz, 1097.46 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST > ,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AV > X2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: failed to identify > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus -1 (PEGP) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP04) > acpiprt3 at acpi0: bus 3 (RP05) > acpiprt4 at acpi0: bus -1 (RP07) > acpiprt5 at acpi0: bus -1 (RP08) > acpiprt6 at acpi0: bus 0 (PCI0) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: APPR, resource for HDEF > acpipwrres1 at acpi0: COMP, resource for COM1 > acpipwrres2 at acpi0: LPP_, resource for LPT0 > acpipwrres3 at acpi0: WRST > acpipwrres4 at acpi0: PXP5, resource for RP05 > acpitz0 at acpi0: critical temperature is 128 degC > acpitz1 at acpi0: critical temperature is 128 degC > acpitz2 at acpi0: critical temperature is 128 degC > acpitz3 at acpi0: critical temperature is 128 degC > acpitz4 at acpi0: critical temperature is 128 degC > acpitz5 at acpi0: critical temperature is 128 degC > acpitz6 at acpi0: critical temperature is 128 degC > acpitz7 at acpi0: critical temperature is 128 degC > "HPQ6001" at acpi0 not configured > "MCHP85D9" at acpi0 not configured > "PNP0A06" at acpi0 not configured > "HPQ8002" at acpi0 not configured > "SYN3018" at acpi0 not configured > acpibat0 at acpi0: BAT0 model "Primary" serial XXXX 2015/07/07 type LIon oem > "Hewlett-Packard" > acpiac0 at acpi0: AC unit online > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: LID_ > "PNP0C14" at acpi0 not configured > "IFX0102" at acpi0 not configured > "INT3397" at acpi0 not configured > "INT340E" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD01 > cpu0: Enhanced SpeedStep 1097 MHz: speeds: 1401, 1400, 1300, 1200, 1100, > 1000, 900, 800, 700, 600, 500 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5300" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1920x1080 > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi > xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address MAC > azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi > azalia1: codecs: Realtek/0x0286 > audio0 at azalia1 > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi > pci2 at ppb1 bus 2 > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x48, > msi > ppb2 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi > pci3 at ppb2 bus 3 > rtsx0 at pci3 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi > sdmmc0 at rtsx0: 4-bit > ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 0 int 17 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 > ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI > 1.3 > ahci0: port 3: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 3 lun 0: <ATA, SAMSUNG MZNLN256, EMT2> SCSI3 0/direct > fixed naa.SN > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 0 > int 18 > iic0 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > efifb at mainbus0 not configured > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Razer Razer Abyssus" > rev 2.00/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 7 buttons, Z dir > wsmouse1 at ums0 mux 0 > umass0 at uhub0 port 3 configuration 1 interface 0 "Verbatim STORE N GO" rev > 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <Verbatim, STORE N GO, 5.00> SCSI2 0/direct > removable serial.SN > sd1: 7457MB, 512 bytes/sector, 15273600 sectors > ugen0 at uhub0 port 4 "Intel product 0x0a2a" rev 2.01/0.01 addr 4 > ugen1 at uhub0 port 5 "Validity Sensors product 0x003f" rev 1.10/1.04 addr 5 > uvideo0 at uhub0 port 7 configuration 1 interface 0 "Chicony HP HD Webcam" > rev 2.00/32.60 addr 6 > video0 at uvideo0 > uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd1a (SN.a) swap on sd1b dump on sd1b > iwm0: hw rev 0x180, fw ver 16.242414.0, address MAC
