Hi,
I have the following problem when trying to establish a connection via umb(4)
(however, ucom works e.g. for GPS). The device umb0 is recognized (full dmesg
at the end of this mail):
--8<-------------------------------------------------------------------------
umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo N5321 gw" rev
2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo N5321 gw" rev
2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umb0 at uhub0 port 4 configuration 1 interface 6 "Lenovo N5321 gw" rev
2.00/0.00 addr 2
umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo N5321 gw" rev
2.00/0.00 addr 2
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
$ usbdevs -v
Controller /dev/usb0:
addr 1: super speed, self powered, config 1, xHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 disabled
port 2 disabled
port 3 disabled
port 4 addr 2: high speed, self powered, config 1, N5321 gw(0x193e),
Lenovo(0x0bdb), rev 0.00
--8<-------------------------------------------------------------------------
and with
# ifconfig umb0 apn drei.at
# ifconfig umb0 up
the device is apparently able to negotiate an IP address:
(subscriber-id, ICC-id and IMEI have reasonable values)
--8<-------------------------------------------------------------------------
umb0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500
index 5 priority 0 llprio 3
roaming disabled registration home network
state up cell-class custom rssi -69dBm speed 5.5Mps up 20.0Mps down
SIM initialized PIN valid
subscriber-id 012345678901234 ICC-id 0123456789012345689 provider 3 AT
device KRD 131 30/123 - R1A IMEI 012345689012345 firmware R3C11 (Pro),
R4A10 (App)
APN drei.at
dns 213.94.78.17 213.94.78.16
status: active
inet 10.72.61.158 --> 10.72.61.155 netmask 0xfffffff8
--8<-------------------------------------------------------------------------
Nonetheless, I fail to route any traffic over the connection:
--8<-------------------------------------------------------------------------
$ netstat -rn
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
224/4 127.0.0.1 URS 0 0 32768 8 lo0
10.72.61.155 10.72.61.158 UH 0 2 - 8 umb0
10.72.61.158 10.72.61.158 UHl 0 9 - 1 umb0
127/8 127.0.0.1 UGRS 0 0 32768 8 lo0
127.0.0.1 127.0.0.1 UHhl 3 200 32768 1 lo0
$ ping 10.72.61.158
PING 10.72.61.158 (10.72.61.158): 56 data bytes
64 bytes from 10.72.61.158: icmp_seq=0 ttl=255 time=0.094 ms
^C
--- 10.72.61.158 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.094/0.094/0.094/0.000 ms
$ ping 10.72.61.155
PING 10.72.61.155 (10.72.61.155): 56 data bytes
^C
--- 10.72.61.155 ping statistics ---
2 packets transmitted, 0 packets received, 100.0% packet loss
$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendmsg: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
--8<-------------------------------------------------------------------------
Any ideas to address this issue?
Best regards,
Ingo
OpenBSD 6.0-current (GENERIC.MP) #0: Wed Nov 16 23:52:52 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8255045632 (7872MB)
avail mem = 8000290816 (7629MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries)
bios0: vendor LENOVO version "JBET62WW (1.26 )" date 09/07/2016
bios0: LENOVO 20BUS35000
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT
SSDT SSDT SSDT PCCT SSDT TCPA SSDT UEFI POAT BATB FPDT UEFI DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 798.27 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 798.16 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 798.16 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 798.16 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 128 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0071" at acpi0 not configured
"LEN200E" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1113" serial 2440 type LION oem "LGC"
acpibat1 at acpi0: BAT1 model "45N1127" serial 9006 type LION oem "LGC"
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
"SMO1200" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 798 MHz: speeds: 2301, 2300, 2200, 2000, 1900, 1800,
1700, 1500, 1400, 1300, 1100, 1000, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
50:7b:9d:af:f7:86
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x99, msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SD7UB3Q2, X223> SCSI3 0/direct
fixed naa.5001b444a46b5378
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo N5321 gw" rev
2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo N5321 gw" rev
2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umb0 at uhub0 port 4 configuration 1 interface 6 "Lenovo N5321 gw" rev
2.00/0.00 addr 2
umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo N5321 gw" rev
2.00/0.00 addr 2
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
ugen0 at uhub0 port 4 configuration 1 "Lenovo N5321 gw" rev 2.00/0.00 addr 2
ugen1 at uhub0 port 5 "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 3
ugen1: setting configuration index 0 failed
ugen2 at uhub0 port 7 "Intel product 0x0a2a" rev 2.01/0.01 addr 4
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 244190MB, 512 bytes/sector, 500102858 sectors
root on sd1a (52d7c73c8fecb071.a) swap on sd1b dump on sd1b
