awesome, congrats

On 11/29/2016 12:12 PM, Craig Skinner wrote:
> Runs fine for me 24*7, for about 15 years. OpenBSD is SUPERB!
>
> 5.7 dumped & 5.9 installed on 22nd October:
>
> OpenBSD 5.9 (GENERIC) #1561: Fri Feb 26 01:22:37 MST 2016
>     dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 349 MHz
> cpu0: 
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,PERF
> real mem  = 200740864 (191MB)
> avail mem = 184385536 (175MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 07/19/99, BIOS32 rev. 0 @ 0xfd861, SMBIOS rev. 2.1 @ 
> 0xf7d95 (32 entries)
> bios0: vendor IBM version "PDKT27AUS" date 07/19/99
> bios0: IBM 6275500
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP
> acpi0: wakeup devices PCI0(S5) PS2K(S1) PS2M(S1) COM1(S5) COM2(S5) USB0(S1)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0: C1(@1 halt!)
> bios0: ROM list: 0xc0000/0x8000
> cpu0 at mainbus0: (uniprocessor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xec000000, size 0x4000000
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 1 function 0 "S3 Trio3D AGP" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> piixpcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 
> wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <Maxtor 90320D2>
> wd0: 16-sector PIO, LBA, 3079MB, 6306048 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> wd1 at pciide0 channel 1 drive 0: <Maxtor 90320D2>
> wd1: 16-sector PIO, LBA, 3079MB, 6306048 sectors
> atapiscsi0 at pciide0 channel 1 drive 1
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-540E, 1.0A> ATAPI 5/cdrom removable
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 9
> piixpm0 at pci0 dev 2 function 3 "Intel 82371AB Power" rev 0x02: SMI
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
> spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
> spdmem2 at iic0 addr 0x52: 64MB SDRAM ECC PC100CL2
> spdmem3 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-5000CL5
> xl0 at pci0 dev 16 function 0 "3Com 3c905B 100Base-TX" rev 0x64: irq 11, 
> address 00:50:04:62:35:f8
> bmtphy0 at xl0 phy 24: 3C905B internal PHY, rev. 0
> xl1 at pci0 dev 18 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 10, 
> address 00:10:5a:f1:9d:b1
> exphy0 at xl1 phy 24: 3Com internal media interface
> isa0 at piixpcib0
> isadma0 at isa0
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on wd0a (868fd5d94428712f.a) swap on wd0b dump on wd0b
>
> # sysctl hw.sensors
>
> # pcidump
> Domain /dev/pci0:
>  0:0:0: Intel 82443BX AGP
>  0:1:0: Intel 82443BX AGP
>  0:2:0: Intel 82371AB PIIX4 ISA
>  0:2:1: Intel 82371AB IDE
>  0:2:2: Intel 82371AB USB
>  0:2:3: Intel 82371AB Power
>  0:16:0: 3Com 3c905B 100Base-TX
>  0:18:0: 3Com 3c905B 100Base-TX
>  1:1:0: S3 Trio3D AGP
>
> # acpidump -o acpidump; cat acpidump.headers
>
> RSD PTR: Checksum=33, OEMID=IBM, RsdtAddress=0x0bfeff80
>
>
> RSDT: Length=40, Revision=1, Checksum=233,
>       OEMID=IBM, OEM Table ID=CDTPWSPD, OEM Revision=0x1000,
>       Creator ID=IBM, Creator Revision=0x0
>
>
>       Entries={ 0x0bfeff00 }
>
>
>       DSDT=0xbfed980
>       INT_MODEL=PIC
>       SCI_INT=9
>       SMI_CMD=0xb2, ACPI_ENABLE=0xf0, ACPI_DISABLE=0xf1, S4BIOS_REQ=0x0
>       PM1a_EVT_BLK=0xfd00-0xfd03
>       PM1a_CNT_BLK=0xfd04-0xfd05
>       PM2_TMR_BLK=0xfd08-0xfd0b
>       PM2_GPE0_BLK=0xfd0c-0xfd0f
>       P_LVL2_LAT=101ms, P_LVL3_LAT=1001ms
>       FLUSH_SIZE=0, FLUSH_STRIDE=0
>       DUTY_OFFSET=0, DUTY_WIDTH=0
>       DAY_ALRM=13, MON_ALRM=0, CENTURY=0
>       Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4}
>
>
> DSDT: Length=9450, Revision=1, Checksum=15,
>       OEMID=IBM, OEM Table ID=CDTPWSPD, OEM Revision=0x1000,
>       Creator ID=MSFT, Creator Revision=0x1000007
>
> # usbdevs -dv
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
> Intel(0x8086), rev 1.00
>   uhub0
>  port 1 powered
>  port 2 powered

Reply via email to