Never could stop the old message d/l problem no matter how I juggled & tweaked settings. I finally went into Gmail settings & changed the date cutoff to allow d/l messages to the present. After first run no more problems. Only glitch now is, no matter how I fiddle with the settings I can't get it to delete d/l messages once I've d/l them, but I can live with that. Also got msmtp working. Must be really tired. Answer was in front of me all the time: one misspelling in .msmtprc was causing it. Had to do with the logfile. Either need some sleep or new glasses. Quite possibly both. :) Again, thanks for the help.
On Tuesday, December 13, 2016 5:41 PM, Marcus MERIGHI <mcmer-open...@tor.at> wrote: dancerviet2...@yahoo.com (Denny White), 2016.12.13 (Tue) 09:52 (CET): > Am running 6.0 Release with all patches up > to date. I've installed mutt, fetchmail, > getmail, procmail, & msmtp. Had rough time seen this? http://marc.info/?l=openbsd-ports&m=141634350915839 tl;dr: move to fdm(1) > setting up mutt trying to remember how to > use Mail vs mbox but got it working. Got > both getmail & fetchmail to d/l email from > my gmail account, but both have same problem: > they keep downloading old messages instead Maybe stop using "keep" on POP3 accounts? > of new. I've tried all sorts of ways with > fetchmail using 'no fetchall' to no avail. > Same with getmail. I also am unable to send > mail from mutt using msmtp. Am pasting in > all relevant *.rc's. Don't know if a dmesg > will help, but remember it's more often > > than not standard practice when asking ??s > on @misc. Thanks for any help might come > my way. Seriously! :) > > ---------------------------------------- > > .muttrc > set realname = XXXXXXXX > set from = XXXXXXXX > set use_from = yes > set envelope_from ="yes" > set sendmail="/usr/local/bin/msmtp" why not use default OpenSMTPd? > set spoolfile = ~/Mail/inbox > set folder="~/Mail" > set record="+sent" > set postponed="+postponed" > set mbox_type=mbox > set move=no > ignore * > unignore Date: From: User-Agent: X-Mailer X-Operating-System To: \ > Cc: Reply-To: Subject: Mail-Followup-To: > hdr_order Date: From: User-Agent: X-Mailer X-Operating-System To: \ > Cc: Reply-To: Subject: Mail-Followup-To: > set editor="vim -c 'set tw=70 et' '+/^$' " > set edit_headers=yes > set markers > set smart_wrap > set pager_context=10 > push <show-version> > #set_signature=~/.signature > > ---------------------------------------- > > .fetchmailrc > set logfile /home/tobias/.fetchmail.log > set no bouncemail > poll pop.gmail.com proto POP3 auth password no dns user > "xxxxx...@gmail.com" pass "XXXXXXXX" is XXXXXXXX keep ssl -k | --keep (Keyword: keep) Keep retrieved messages on the remote mailserver. Normally, messages are deleted from the folder on the mailserver after they have been retrieved. Specifying the keep option causes retrieved messages to remain in your folder on the mailserver. This option does not work with ETRN or ODMR. If used with POP3, it is recommended to also specify the --uidl option or uidl keyword. Marcus > mda "/usr/local/bin/procmail -d %T" > options > #verbose > #no fetchall > #sslcertck > #sslcertpath /etc/ssl/cert.pem > (adding now as posting. The certs work okay but without > any added switches like the ones here that are commented > out.) > > > #set postmaster "XXXXXXXX" > #set logfile /home/XXXXXXXX/.fetchmail.log > #set polling time (5 minutes) > #:set daemon 600 > > #poll pop.gmail.com with proto POP3 > #user 'XXXX@x...@gmail.com' there with password 'XXXXXXXX' is XXXXXXXX here > keep no fetchall ssl sslcertck sslcertpath /etc/ssl/cert.pem > > # fetchmail -d0 -vk pop.gmail.com > > ---------------------------------------- > > getmailrc > [retriever] > type = SimplePOP3SSLRetriever > server = pop.gmail.com > port = 995 > username = XXXXXXXX > password = XXXXXXXX > > [destination] > type = MDA_external > path = /usr/local/bin/procmail > arguments = ('-f', "%(sender)") > #arguments = ('~XXXXXXXX/.procmailrc', '-f', "%(sender)") > (While composing this email tried couple other > switches with getmail try to stop it from d/l > old read msgs, but it still did it. tried this: > read_all = false > delete = false > Was no help) > > ---------------------------------------- > > .procmailrc (putting this in just to be safe. Actually > does work okay putting everything in mutt) > PATH=/bin:/usr/bin:/usr/local/bin > VERBOSE=on # Turn on for verbose log > DEFAULT=/home/XXXXXXXX/Mail/inbox > MAILDIR=/home/XXXXXXXX/Mail # Where Procmail recipes deliver > LOGFILE=$HOME/.procmaillog # Keep a log for troubleshooting > # Recipes > :0: > * ^TOmutt-user > mutt > > ---------------------------------------- > > .msmtprc (not able to send mail from mutt with this *rc) > account default > host smtp.gmail.com > port 587 > from "xxxxx...@gmail.com" > tls on > tls_starttls on > #tls_trust_file /etc/ssl/cert.pem > auth on > user "xxxxx...@gmail.com" > password "XXXXXXXXXX" > logile ~/.msmtp.log > (And no, no output to show in log. Nothing there) > > ---------------------------------------- > > system dmesg: > > OpenBSD 6.0 (GENERIC.MP) #2: Sun Dec 11 10:57:09 CST 2016 > r...@traveler2.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error > f7<clock_battery,ROM_cksum,config_unit,memory_size,invalid_time> > real mem = 4156084224 (3963MB) > avail mem = 4025651200 (3839MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xb8c36000 (44 entries) > bios0: vendor LENOVO version "92CN30WW(V1.10)" date 05/16/2014 > bios0: LENOVO 20332 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP UEFI MSDM HPET LPIT APIC MCFG SLIC SSDT SSDT SSDT > SSDT SSDT SSDT SSDT UEFI SSDT FPDT BGRT > acpi0: wakeup devices XHC1(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) > RP03(S4) PXSX(S4) RP04(S4) EHC1(S3) LID0(S3) PWRB(S4) BRCM(S0) BRC3(S0) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Pentium(R) CPU N3530 @ 2.16GHz, 2167.07 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT > cpu0: 1MB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 83MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Pentium(R) CPU N3530 @ 2.16GHz, 2166.67 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT > cpu1: 1MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Pentium(R) CPU N3530 @ 2.16GHz, 2166.67 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT > cpu2: 1MB 64b/line 16-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Pentium(R) CPU N3530 @ 2.16GHz, 2166.67 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT > cpu3: 1MB 64b/line 16-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 87 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus -1 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PC05, resource for RP01 > acpipwrres1 at acpi0: PLPE > acpipwrres2 at acpi0: PLPE > acpipwrres3 at acpi0: USBC, resource for EHC1 > acpipwrres4 at acpi0: CLK0 > acpipwrres5 at acpi0: CLK1 > acpitz0 at acpi0acpitz0: TZ01: failed to read _TMP > acpitz0: TZ01: failed to read _TMP > "CIND0C60" at acpi0 not configured > acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo Yoga 2 11" > "VPC2004" at acpi0 not configured > "IDEA0104" at acpi0 not configured > "SYN2B2E" at acpi0 not configured > acpiac0 at acpi0: AC unit online > acpibtn0 at acpi0: LID0 > "DMA0F28" at acpi0 not configured > acpibtn1 at acpi0: PWRB > "INT3396" at acpi0 not configured > "INTCF1C" at acpi0 not configured > "INT33BD" at acpi0 not configured > "INT3401" at acpi0 not configured > "INT3400" at acpi0 not configured > "INT3403" at acpi0 not configured > "INT3403" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: Enhanced SpeedStep 2167 MHz: speeds: 2159, 2158, 1992, 1826, 1660, > 1494, 1328, 1162, 996, 830, 664, 498 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e > inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e > drm0 at inteldrm0 > inteldrm0: msi > Raw EDID: > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > drm:pid0:drm_do_get_edid *WARNING* VGA-1: EDID block 0 invalid. > inteldrm0: 1366x768 > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi, AHCI 1.3 > ahci0: port 0: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SV300S3, 608A> SCSI3 0/direct > fixed naa.50026b786500dad4 > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > "Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured > azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e: msi > azalia0: codecs: Conexant/0x5114, Intel/0x2882, using Conexant/0x5114 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel Bay Trail I2C" rev 0x0e: msi > pci1 at ppb0 bus 1 > "Atheros AR9565" rev 0x01 at pci1 dev 0 function 0 not configured > pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e > ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e: apic 2 > int 18 > iic0 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > efifb at mainbus0 not configured > uhub1 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 2 > urtwn0 at uhub1 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev > 2.00/0.00 addr 3 > urtwn0: MAC/BB RTL8188EU, RF 6052 0T0R, address 84:16:f9:0a:d9:ca > uvideo0 at uhub1 port 2 configuration 1 interface 0 "J5CE1G9J4 Lenovo > EasyCamera" rev 2.00/0.03 addr 4 > video0 at uvideo0 > ugen0 at uhub1 port 4 "Atheros Communications product 0x3004" rev 1.10/0.01 > addr 5 > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Atmel Atmel maXTouch > Digitizer" rev 2.00/12.33 addr 6 > uhidev0: iclass 3/0, 5 report ids > ums0 at uhidev0 reportid 1: 1 button, tip > wsmouse1 at ums0 mux 0 > uhid0 at uhidev0 reportid 2: input=0, output=0, feature=1 > ums1 at uhidev0 reportid 5 > ums1: mouse has no X report > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Atmel Atmel maXTouch > Digitizer" rev 2.00/12.33 addr 6 > uhidev1: iclass 3/0, 2 report ids > uhid1 at uhidev1 reportid 1: input=63, output=63, feature=0 > uhid2 at uhidev1 reportid 2: input=63, output=63, feature=0 > uhidev2 at uhub0 port 4 configuration 1 interface 0 "ITE Tech. Inc. ITE > Device(8386)" rev 2.00/10.10 addr 7 > uhidev2: iclass 3/0, 90 report ids > uhid3 at uhidev2 reportid 1: input=9, output=0, feature=18 > uhid4 at uhidev2 reportid 2: input=14, output=0, feature=28 > uhid5 at uhidev2 reportid 3: input=17, output=0, feature=38 > uhid6 at uhidev2 reportid 4: input=8, output=0, feature=18 > uhid7 at uhidev2 reportid 5: input=36, output=0, feature=34 > uhid8 at uhidev2 reportid 6: input=6, output=0, feature=42 > uhid9 at uhidev2 reportid 7: input=14, output=0, feature=32 > uhid10 at uhidev2 reportid 90: input=0, output=0, feature=16 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (cad7dc06038f6882.a) swap on sd0b dump on sd0b > urtwn0 detached > video0 detached > uvideo0 detached > ugen0 detached > uhub1 detached > wsmouse1 detached > ums0 detached > uhid0 detached > ums1 detached > uhidev0 detached > uhid1 detached > uhid2 detached > uhidev1 detached > uhid3 detached > uhid4 detached > uhid5 detached > uhid6 detached > uhid7 detached > uhid8 detached > uhid9 detached > uhid10 detached > uhidev2 detached > uhub0 detached > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > uhub1 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 2 > urtwn0 at uhub1 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev > 2.00/0.00 addr 3 > urtwn0: MAC/BB RTL8188EU, RF 6052 0T0R, address 84:16:f9:0a:d9:ca > uvideo0 at uhub1 port 2 configuration 1 interface 0 "J5CE1G9J4 Lenovo > EasyCamera" rev 2.00/0.03 addr 4 > video0 at uvideo0 > ugen0 at uhub1 port 4 "Atheros Communications product 0x3004" rev 1.10/0.01 > addr 5 > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Atmel Atmel maXTouch > Digitizer" rev 2.00/12.33 addr 6 > uhidev0: iclass 3/0, 5 report ids > ums0 at uhidev0 reportid 1: 1 button, tip > wsmouse1 at ums0 mux 0 > uhid0 at uhidev0 reportid 2: input=0, output=0, feature=1 > ums1 at uhidev0 reportid 5 > ums1: mouse has no X report > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Atmel Atmel maXTouch > Digitizer" rev 2.00/12.33 addr 6 > uhidev1: iclass 3/0, 2 report ids > uhid1 at uhidev1 reportid 1: input=63, output=63, feature=0 > uhid2 at uhidev1 reportid 2: input=63, output=63, feature=0 > uhidev2 at uhub0 port 4 configuration 1 interface 0 "ITE Tech. Inc. ITE > Device(8386)" rev 2.00/10.10 addr 7 > uhidev2: iclass 3/0, 90 report ids > uhid3 at uhidev2 reportid 1: input=9, output=0, feature=18 > uhid4 at uhidev2 reportid 2: input=14, output=0, feature=28 > uhid5 at uhidev2 reportid 3: input=17, output=0, feature=38 > uhid6 at uhidev2 reportid 4: input=8, output=0, feature=18 > uhid7 at uhidev2 reportid 5: input=36, output=0, feature=34 > uhid8 at uhidev2 reportid 6: input=6, output=0, feature=42 > uhid9 at uhidev2 reportid 7: input=14, output=0, feature=32 > uhid10 at uhidev2 reportid 90: input=0, output=0, feature=16 > umass0 at uhub0 port 1 configuration 1 interface 0 "Generic Mass Storage" rev > 2.00/1.05 addr 8 > umass0: using SCSI over Bulk-Only > scsibus4 at umass0: 2 targets, initiator 0 > sd1 at scsibus4 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2 0/direct > removable > sd1: 1920MB, 512 bytes/sector, 3932160 sectors > sd1 detached > scsibus4 detached > umass0 detached > urtwn0 detached > video0 detached > uvideo0 detached > ugen0 detached > uhub1 detached > wsmouse1 detached > ums0 detached > uhid0 detached > ums1 detached > uhidev0 detached > uhid1 detached > uhid2 detached > uhidev1 detached > uhid3 detached > uhid4 detached > uhid5 detached > uhid6 detached > uhid7 detached > uhid8 detached > uhid9 detached > uhid10 detached > uhidev2 detached > uhub0 detached > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > uhub1 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 2 > urtwn0 at uhub1 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev > 2.00/0.00 addr 3 > urtwn0: MAC/BB RTL8188EU, RF 6052 0T0R, address 84:16:f9:0a:d9:ca > uvideo0 at uhub1 port 2 configuration 1 interface 0 "J5CE1G9J4 Lenovo > EasyCamera" rev 2.00/0.03 addr 4 > video0 at uvideo0 > ugen0 at uhub1 port 4 "Atheros Communications product 0x3004" rev 1.10/0.01 > addr 5 > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Atmel Atmel maXTouch > Digitizer" rev 2.00/12.33 addr 6 > uhidev0: iclass 3/0, 5 report ids > ums0 at uhidev0 reportid 1: 1 button, tip > wsmouse1 at ums0 mux 0 > uhid0 at uhidev0 reportid 2: input=0, output=0, feature=1 > ums1 at uhidev0 reportid 5 > ums1: mouse has no X report > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Atmel Atmel maXTouch > Digitizer" rev 2.00/12.33 addr 6 > uhidev1: iclass 3/0, 2 report ids > uhid1 at uhidev1 reportid 1: input=63, output=63, feature=0 > uhid2 at uhidev1 reportid 2: input=63, output=63, feature=0 > uhidev2 at uhub0 port 4 configuration 1 interface 0 "ITE Tech. Inc. ITE > Device(8386)" rev 2.00/10.10 addr 7 > uhidev2: iclass 3/0, 90 report ids > uhid3 at uhidev2 reportid 1: input=9, output=0, feature=18 > uhid4 at uhidev2 reportid 2: input=14, output=0, feature=28 > uhid5 at uhidev2 reportid 3: input=17, output=0, feature=38 > uhid6 at uhidev2 reportid 4: input=8, output=0, feature=18 > uhid7 at uhidev2 reportid 5: input=36, output=0, feature=34 > uhid8 at uhidev2 reportid 6: input=6, output=0, feature=42 > uhid9 at uhidev2 reportid 7: input=14, output=0, feature=32 > uhid10 at uhidev2 reportid 90: input=0, output=0, feature=16 > umass0 at uhub0 port 1 configuration 1 interface 0 "Generic Mass Storage" rev > 2.00/1.05 addr 8 > umass0: using SCSI over Bulk-Only > scsibus4 at umass0: 2 targets, initiator 0 > sd1 at scsibus4 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2 0/direct > removable > sd1: 1920MB, 512 bytes/sector, 3932160 sectors > sd1 detached > scsibus4 detached > umass0 detached > urtwn0 detached > video0 detached > uvideo0 detached > ugen0 detached > uhub1 detached > wsmouse1 detached > ums0 detached > uhid0 detached > ums1 detached > uhidev0 detached > uhid1 detached > uhid2 detached > uhidev1 detached > uhid3 detached > uhid4 detached > uhid5 detached > uhid6 detached > uhid7 detached > uhid8 detached > uhid9 detached > uhid10 detached > uhidev2 detached > uhub0 detached > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > uhub1 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 2 > urtwn0 at uhub1 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev > 2.00/0.00 addr 3 > urtwn0: MAC/BB RTL8188EU, RF 6052 0T0R, address 84:16:f9:0a:d9:ca > uvideo0 at uhub1 port 2 configuration 1 interface 0 "J5CE1G9J4 Lenovo > EasyCamera" rev 2.00/0.03 addr 4 > video0 at uvideo0 > ugen0 at uhub1 port 4 "Atheros Communications product 0x3004" rev 1.10/0.01 > addr 5 > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Atmel Atmel maXTouch > Digitizer" rev 2.00/12.33 addr 6 > uhidev0: iclass 3/0, 5 report ids > ums0 at uhidev0 reportid 1: 1 button, tip > wsmouse1 at ums0 mux 0 > uhid0 at uhidev0 reportid 2: input=0, output=0, feature=1 > ums1 at uhidev0 reportid 5 > ums1: mouse has no X report > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Atmel Atmel maXTouch > Digitizer" rev 2.00/12.33 addr 6 > uhidev1: iclass 3/0, 2 report ids > uhid1 at uhidev1 reportid 1: input=63, output=63, feature=0 > uhid2 at uhidev1 reportid 2: input=63, output=63, feature=0 > uhidev2 at uhub0 port 4 configuration 1 interface 0 "ITE Tech. Inc. ITE > Device(8386)" rev 2.00/10.10 addr 7 > uhidev2: iclass 3/0, 90 report ids > uhid3 at uhidev2 reportid 1: input=9, output=0, feature=18 > uhid4 at uhidev2 reportid 2: input=14, output=0, feature=28 > uhid5 at uhidev2 reportid 3: input=17, output=0, feature=38 > uhid6 at uhidev2 reportid 4: input=8, output=0, feature=18 > uhid7 at uhidev2 reportid 5: input=36, output=0, feature=34 > uhid8 at uhidev2 reportid 6: input=6, output=0, feature=42 > uhid9 at uhidev2 reportid 7: input=14, output=0, feature=32 > uhid10 at uhidev2 reportid 90: input=0, output=0, feature=16 > umass0 at uhub0 port 1 configuration 1 interface 0 "Generic Mass Storage" rev > 2.00/1.05 addr 8 > umass0: using SCSI over Bulk-Only > scsibus4 at umass0: 2 targets, initiator 0 > sd1 at scsibus4 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2 0/direct > removable > sd1: 1920MB, 512 bytes/sector, 3932160 sectors > > One tequila, two tequila, three tequila, floor! > > > !DSPAM:584fb7a497048907813971!
