Hi!
I got new Plextor ssd disk
root :: /home/ME : dmesg | grep sd0
sd0 at scsibus1 targ 0 lun 0: <ATA, PLEXTOR PX-256S2, 1.01> SCSI3 0/direct
fixed naa.5002303100b98e54
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
and want to move my installation to it from 512gb hdd.
I typed
fdisk -i sd0
disklabel -E sd0
a a
...
a h
and got this:
root :: /home/ME : disklabel sd0
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: PLEXTOR PX-256S2
duid: 7e4d828b3a68af8b
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 31130
total sectors: 500118192
boundstart: 64
boundend: 500103450
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 10490368 64 4.2BSD 2048 16384 1
b: 8385943 10490432 swap
c: 500118192 0 unused
d: 20980864 18876384 4.2BSD 2048 16384 1
e: 314568704 39857280 4.2BSD 4096 32768 1
g: 62910560 354425984 4.2BSD 2048 16384 1
h: 82766880 417336544 4.2BSD 2048 16384 1
The size of newly created partitions is quite smaller(however i have only
few megabytes used on my current disk partitions)
But now:
newfs sd0a
/dev/rsd0a: 5122.2MB in 10490368 sectors of 512 bytes
26 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
super-block backups (for fsck -b #) at:
newfs: wtfs: write error on block 32: Input/output error
and this in dmesg:
ahci0: attempting to idle device
atascsi_disk_sync_done: error
What is my problem?
Openbsd current, dmesg:
OpenBSD 6.0-current (GENERIC.MP) #90: Fri Dec 30 15:53:05 MST 2016
bu...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8451125248 (8059MB)
avail mem = 8190341120 (7810MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (67 entries)
bios0: vendor LENOVO version "8BET62WW (1.42 )" date 07/26/2013
bios0: LENOVO 428445G
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA
SSDT SSDT UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3)
EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.88 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2292875400 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
cpu4 at mainbus0: apid 4 (application processor)
cpu4: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 2, package 0
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 2, package 0
cpu6 at mainbus0: apid 6 (application processor)
cpu6: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 0, core 3, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus 14 (EXP7)
acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu4 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu5 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu6 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu7 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"LEN0015" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "42T4799" serial 21914 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2292 MHz: speeds: 2301, 2300, 1800, 1600, 1400,
1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
f0:de:f1:ad:54:34
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Conexant/0x2c06, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e:
msi, MIMO 3T3R, MoW, address 24:77:03:28:08:40
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x05: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
"Ricoh 5U832 Firewire" rev 0x04 at pci4 dev 0 function 3 not configured
ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 14
xhci0 at pci5 dev 0 function 0 "NEC xHCI" rev 0x04: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI
1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, PLEXTOR PX-256S2, 1.01> SCSI3 0/direct
fixed naa.5002303100b98e54
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed
naa.5000c50044bc194e
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem2 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm disabled by firmware
vmm at mainbus0 not configured
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
ugen0 at uhub3 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
ugen1 at uhub3 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev
2.00/7.48 addr 4
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Ricoh Company Ltd.
Integrated Camera" rev 2.00/80.29 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (380463e4fcd12dda.a) swap on sd1b dump on sd1b
ahci0: attempting to idle device
atascsi_disk_sync_done: error
