Recent dmesg, and VM exits because of virtio-scsi issue when it is installing
'bsd.mp'.
j.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2017 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.0-current (RAMDISK_CD) #163: Sat Feb 11 19:41:57 MST 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 250470400 (238MB)
avail mem = 239251456 (228MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf7170 (10 entries)
bios0: vendor SeaBIOS version "1.9.1-5.el7_3.1" date 04/01/2014
bios0: Red Hat KVM
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 2.5+, 2394.37 MHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MM
X,FXSR,SSE,SSE2,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 999MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu at acpi0 not configured
"ACPI0006" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"ACPI0010" at acpi0 not configured
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
"Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
virtio0 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 52:54:00:15:b0:a3
virtio0: msix shared
virtio1 at pci0 dev 3 function 0 "Qumranet Virtio SCSI" rev 0x00
vioscsi0 at virtio1: qsize 128
scsibus0 at vioscsi0: 255 targets
sd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+> SCSI3 0/direct
fixed
sd0: 20480MB, 512 bytes/sector, 41943040 sectors, thin
virtio1: msix shared
uhci0 at pci0 dev 4 function 0 "Intel 82801I USB" rev 0x03: apic 0 int 11
uhci1 at pci0 dev 4 function 1 "Intel 82801I USB" rev 0x03: apic 0 int 10
uhci2 at pci0 dev 4 function 2 "Intel 82801I USB" rev 0x03: apic 0 int 10
ehci0 at pci0 dev 4 function 7 "Intel 82801I USB" rev 0x03: apic 0 int 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Memory" rev 0x00
virtio2: no matching child driver; not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
softraid0 at root
scsibus1 at softraid0: 256 targets
PXE boot MAC address 52:54:00:15:b0:a3, interface vio0
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.0 installation program.
Starting non-interactive mode in 5 seconds...
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
DHCPDISCOVER on vio0 - interval 1
DHCPDISCOVER on vio0 - interval 1
DHCPOFFER from 192.168.1.1 (00:25:90:60:8f:1e)
DHCPREQUEST on vio0 to 255.255.255.255
DHCPACK from 192.168.1.1 (00:25:90:60:8f:1e)
bound to 192.168.1.118 -- renewal in 1800 seconds.
Fetching
http://192.168.1.2/52:54:00:15:b0:a3-install.conf?path=snapshots/amd64
Performing non-interactive install...
Terminal type? [vt220] vt220
System hostname? (short form, e.g. 'foo') test1
Available network interfaces are: vio0 vlan0.
Which network interface do you wish to configure? (or 'done') [vio0] vio0
IPv4 address for vio0? (or 'dhcp' or 'none') [dhcp] dhcp
DHCPREQUEST on vio0 to 255.255.255.255
DHCPACK from 192.168.1.1 (00:25:90:60:8f:1e)
bound to 192.168.1.118 -- renewal in 1800 seconds.
IPv6 address for vio0? (or 'rtsol' or 'none') [none] none
Available network interfaces are: vio0 vlan0.
Which network interface do you wish to configure? (or 'done') [done] done
Using DNS domainname internal
Using DNS nameservers at 192.168.1.1
Password for root account? <provided>
Public ssh key for root account? [none] none
Start sshd(8) by default? [yes] yes
Change the default console to com0? [yes] yes
Available speeds are: 9600 19200 38400 57600 115200.
Which speed should com0 use? (or 'done') [115200] 115200
Setup a user? (enter a lower-case loginname, or 'no') [no] jirib
Full name for user jirib? [jirib] jirib
Password for user jirib? <provided>
Public ssh key for user jirib [none] ssh-rsa
AAAAB3NzaC1yc2EAAAADAQABAAABAQC7deq1vJOnb+/Ee1hL2+z+D6UbiI+Ww8sAoMl62PSJfKa7x
gYG+B3pArtoa7lc9krs9hKQ+L7gh65ekaXNRCY+CrCWgrT8+rnPGFubbxiVzYS2z+koA+nZ/1RTu7
GPFupsQUutQniG4X3kurUlLQldhm9wsoA8Fyc2Se//Fr0uqJw4LrLraGRS4cLaAh1dIv78/ymZyWj
4V7xB5B9/Fq9J3+SA/UR1px3TKM9/V5SyzbJJ9d5I/2PjYv8AAtmzqA87PwNtfMGFEtM3ze1MlaQn
zsYAOg84TM9UYieiUeVdpfnM7hIhHiqSTTNTaN0mtsGAA2g2lf+kccft6CeichAb jirib@
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no] no
What timezone are you in? ('?' for list) [Europe/Prague] Europe/Prague
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0] sd0
Disk: sd0 geometry: 2610/255/63 [41943040 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-----------------------------------------------------------------------------
--
0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
*3: A6 0 1 2 - 2609 254 63 [ 64: 41929586 ] OpenBSD
Use (W)hole disk MBR, whole disk (G)PT, (O)penBSD area or (E)dit? [OpenBSD]
OpenBSD
URL to autopartitioning template for disklabel? [none]
http://192.168.1.2/52:54:00:15:b0:a3-install.tmpl
Fetching http://192.168.1.2/52:54:00:15:b0:a3-install.tmpl
/dev/rsd0a: 256.0MB in 524288 sectors of 512 bytes
4 cylinder groups of 64.00MB, 4096 blocks, 8192 inodes each
/dev/rsd0e: 64.0MB in 131072 sectors of 512 bytes
4 cylinder groups of 16.00MB, 1024 blocks, 2048 inodes each
/dev/rsd0d: 1024.0MB in 2097152 sectors of 512 bytes
6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0f: 1024.0MB in 2097152 sectors of 512 bytes
6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0h: 1024.0MB in 2097152 sectors of 512 bytes
6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0g: 128.0MB in 262144 sectors of 512 bytes
4 cylinder groups of 32.00MB, 2048 blocks, 4096 inodes each
/dev/rsd0i: 16441.4MB in 33672032 sectors of 512 bytes
82 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/sd0a (8952f1c29399384b.a) on /mnt type ffs (rw, asynchronous, local)
/dev/sd0e (8952f1c29399384b.e) on /mnt/home type ffs (rw, asynchronous, local,
nodev, nosuid)
/dev/sd0d (8952f1c29399384b.d) on /mnt/tmp type ffs (rw, asynchronous, local,
nodev, nosuid)
/dev/sd0f (8952f1c29399384b.f) on /mnt/usr type ffs (rw, asynchronous, local,
nodev)
/dev/sd0h (8952f1c29399384b.h) on /mnt/usr/local type ffs (rw, asynchronous,
local, nodev)
/dev/sd0g (8952f1c29399384b.g) on /mnt/var type ffs (rw, asynchronous, local,
nodev, nosuid)
/dev/sd0i (8952f1c29399384b.i) on /mnt/var/log type ffs (rw, asynchronous,
local, nodev, nosuid)
Let's install the sets!
Location of sets? (disk http or 'done') [http] http
HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] none
HTTP Server? (hostname, list#, 'done' or '?') [192.168.1.2] 192.168.1.2
Server directory? [///////pub/OpenBSD/snapshots/amd64]
///////pub/OpenBSD/snapshots/amd64
Unable to connect using https. Use http instead? [no] yes
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-' to the set name, file name pattern or 'all'.
Selected
sets are labelled '[X]'.
[X] bsd [X] base60.tgz [X] game60.tgz [X] xfont60.tgz
[X] bsd.rd [X] comp60.tgz [X] xbase60.tgz [X] xserv60.tgz
[X] bsd.mp [X] man60.tgz [X] xshare60.tgz
Set name(s)? (or 'abort' or 'done') [done] done
Get/Verify SHA256.sig 100% |**************************| 2152 00:00
Signature Verified
Get/Verify bsd 100% |**************************| 10424 KB 00:00
Get/Verify bsd.rd 100% |**************************| 9215 KB 00:00
Get/Verify bsd.mp 100% |**************************| 10490 KB 00:00
Get/Verify base60.tgz 100% |**************************| 52124 KB 00:01
Get/Verify comp60.tgz 100% |**************************| 46094 KB 00:01
Get/Verify man60.tgz 100% |**************************| 8780 KB 00:00
Get/Verify game60.tgz 100% |**************************| 2707 KB 00:00
Get/Verify xbase60.tgz 100% |**************************| 23372 KB 00:00
Get/Verify xshare60.tgz 100% |**************************| 4414 KB 00:00
Get/Verify xfont60.tgz 100% |**************************| 39342 KB 00:01
Get/Verify xserv60.tgz 100% |**************************| 22610 KB 00:00
Installing bsd 100% |**************************| 10424 KB 00:00
Installing bsd.rd 100% |**************************| 9215 KB 00:00
Installing bsd.mp 100% |**************************| 10490 KB 00:00
Connection closed by foreign host.
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
QEMU_AUDIO_DRV=none /usr/libexec/qemu-kvm -name guest=test1,debug-threads=on
-S -object
secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-30-test1/ma
ster-key.aes -machine pc-i440fx-rhel7.3.0,accel=kvm,usb=off,vmport=off -m 256
-realtime mlock=off -smp 2,sockets=2,cores=1,threads=1 -uuid
2ce6206b-fdf6-40ae-b3ba-5a90d2f39348 -nographic -no-user-config -nodefaults
-device sga -chardev
socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-30-test1/monitor.sock
,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc
base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=discard -no-hpet
-no-shutdown -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1 -boot
menu=on,strict=on -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 -device
ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4
-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x4.0x1
-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x4.0x2
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -drive
file=/var/lib/libvirt/images/test1.img,format=raw,if=none,id=drive-scsi0-0-0-0
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi
0-0-0-0 -netdev tap,fd=28,id=hostnet0,vhost=on,vhostfd=30 -device
virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:15:b0:a3,bus=pci.0,addr=0
x2,bootindex=1 -chardev
socket,id=charserial0,host=127.0.0.1,port=4555,telnet,server,nowait -device
isa-serial,chardev=charserial0,id=serial0 -device
virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 -msg timestamp=on
2017-03-14T23:13:17.289782Z qemu-kvm: wrong size for virtio-scsi headers
2017-03-14 23:13:17.499+0000: shutting down
