On Mar 29 15:01:10, [email protected] wrote:
> > I only plugged _one_ of those dongle antennas
> > into the tiny connectoron the the card. Is that related to the 3T2R?
> > Is that related to the timeouts? (Please excuse my wifi HW ignorance.)
> 
> You *must* plug at least 2 antennas if you want to use the card in 11n mode.
> Otherwise you will see packet loss. If you only have 1 antenna, disable 11n
> by adding a line that says 'mode 11g' at the top of hostname.athn0.
> 
> > Generally, what are the options nowadays for running an AP?
> 
> The athn card you have is a good option. I would recommend using 5 GHz
> but your card does not support it. Apart from that, this card is great.
> You might want to look into adding a second antenna so you can benefit
> from 11n mode. You might have to drill holes into the ALIX case for this.
> An ALIX I use runs in 11a mode for this reason and it's good enough for me.

Thank you for the insight.

I put the second antenna in and the packet loss disappeared.
Could it matter which 2 of the 3 I am using? I used the two
marked (1) and (2), not using the unmarked third in the other corner:
http://stare.cz/dmesg/alix2c1-athn.jpg

Anyway, mode 11g still seems more reliable than the faster 11n.
These also disappeared once I switched to 11g:

  athn0: device timeout
  athn0: device timeout
  athn0: device timeout

So the hostname.athn0 is now:

  inet 192.168.33.1 255.255.255.0 NONE 
  media autoselect mediaopt hostap mode 11g
  nwid stare.cz wpakey FOO

        Thanks!

                Jan


http://stare.cz/dmesg/alix2c1-athn.jpg
http://stare.cz/dmesg/alix2c1.20170328

OpenBSD 6.1 (GENERIC) #277: Tue Mar 28 21:51:32 MDT 2017
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 432 
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem  = 133713920 (127MB)
avail mem = 118480896 (112MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/10/07, BIOS32 rev. 0 @ 0xfceb2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 
00:0d:b9:12:9f:2c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 
00:0d:b9:12:9f:2d
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address 
00:0d:b9:12:9f:2e
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
athn0 at pci0 dev 12 function 0 "Atheros AR5416" rev 0x01: irq 9
athn0: MAC AR5416 rev 2, RF AR2133 (3T2R), ROM rev 2, address 00:1d:6a:6b:03:07
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 
3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ELITE PRO CF CARD 8GB>
wd0: 1-sector PIO, LBA, 7279MB, 14909328 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0, 
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 
addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 
addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (bf940e6c7aaf2c50.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
WARNING: clock time much less than file system time
WARNING: using file system time
WARNING: CHECK AND RESET THE DATE!

Reply via email to