Hi,
Just wondering if anyone else is seeing the same issue I am booting a
6.1-snapshot in bhyve? In preparation for the 6.1 pending release, I have
tried to spin up 6.1-snap to iron out any issues in bhyve but I don't get
very far into the installation process:
----
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2017 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.1 (RAMDISK_CD) #19: Sat Apr 1 13:49:18 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 251658240 (240MB)
avail mem = 240402432 (229MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf101f (10 entries)
bios0: vendor BHYVE version "1.00" date 03/14/2014
bios0: bhyve BHYVE
acpi0 at bios0: rev 2
acpi0: tables DSDT APIC FACP HPET MCFG
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz, 3491.87 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,SS,HTT,PBE,SSE3,PCLMUL,DTES64,DS-CPL,SSSE3,SDBG,FMA3,CX16
,xTPR,PCID,DCA,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PA
GE1GB,LONG,LAHF,ABM,ITSC,FSGSBASE,BMI1,AVX2,BMI2,ERMS,INVPCID,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
rdmsr to register 0xc80 on vcpu 0
fatal protection fault in supervisor mode
trap type 4 code 0 rip ffffffff811c1d17 cs 8 rflags 202 cr2 0 cpl e rsp
ffffffff81a05940
panic: trap type 4, code=0, pc=ffffffff811c1d17
The operating system has halted.
Please press any key to reboot.
-----
Is anyone able to shed light on this? I can confirm that 6.0-stable
installed and runs fine as a guest on this host:
-----
OpenBSD 6.0 (GENERIC.MP) #2: Wed Oct 12 07:46:27 AEDT 2016
mrbuil...@cybermen.ar18.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2130030592 (2031MB)
avail mem = 2061062144 (1965MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7fb6a000 (10 entries)
bios0: vendor BHYVE version "1.00" date 03/14/2014
acpi0 at bios0: rev 2
acpi0: sleep states S5
acpi0: tables DSDT FACP HPET APIC MCFG SPCR
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 10000000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz, 3491.95 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,SS,HTT,PBE,SSE3,PCLMUL,DTES64,DS-CPL,SSSE3,FMA3,CX16,xTPR
,PCID,DCA,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB
,LONG,LAHF,ABM,ITSC,FSGSBASE,BMI1,AVX2,BMI2,ERMS,INVPCID,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 134MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz, 3499.42 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,SS,HTT,PBE,SSE3,PCLMUL,DTES64,DS-CPL,SSSE3,FMA3,CX16,xTPR
,PCID,DCA,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB
,LONG,LAHF,ABM,ITSC,FSGSBASE,BMI1,AVX2,BMI2,ERMS,INVPCID,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 0, package 1
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PC00)
"PNP0303" at acpi0 not configured
"PNP0F03" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
pvbus0 at mainbus0: bhyve
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 unknown vendor 0x1275 product 0x1275 rev 0x00
unknown vendor 0xfb5d product 0x40fb (class display subclass VGA, rev 0x00)
at pci0 dev 2 function 0 not configured
ahci0 at pci0 dev 3 function 0 "Intel 82801H AHCI" rev 0x00: apic 2 int 16,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
cd0 at scsibus1 targ 0 lun 0: <BHYVE, BHYVE DVD-ROM, 001> ATAPI 5/cdrom
removable
ahci1 at pci0 dev 4 function 0 "Intel 82801H AHCI" rev 0x00: apic 2 int 17,
AHCI 1.3
ahci1: port 0: 6.0Gb/s
scsibus2 at ahci1: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, BHYVE SATA DISK, 001> SCSI3 0/direct
fixed t10.ATA_BHYVE_SATA_DISK_BHYVE-4AF5-4FB1-76AA
sd0: 9216MB, 512 bytes/sector, 18874368 sectors, thin
virtio0 at pci0 dev 5 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 00:a0:98:81:81:c6
virtio0: msix shared
virtio1 at pci0 dev 6 function 0 "Qumranet Virtio Network" rev 0x00
vio1 at virtio1: address 00:a0:98:6d:12:d0
virtio1: msix shared
pcib0 at pci0 dev 31 function 0 "Intel 82371SB ISA" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
efifb0 at mainbus0: 1920x1200, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (e5bd839db3a8f165.a) swap on sd0b dump on sd0b
-----
Thanks in advance!
