I tried a suggestion from Gregor Best on a different thread https://marc.info/?l=openbsd-misc&m=149229853815568&w=2
I reinstalled 6.1, but booting via UEFI this time. Using the wsfb driver like it says in that thread worked for me. I am not sure if I could have got my original "bios" install booting without a reinstall. Or why vesa did not work. But I got a solution for X now. Hrishi On Sat, Apr 15, 2017 at 5:26 PM, Hrishikesh Muruk <[email protected]> wrote: > Hello > > I installed OpenBSD 6.1 on an Intel NUC6i7KYK. It has a Skylake i7 CPU so > I know 3D acceleration is not supported. I think vesa should still work - > please correct me if that is not the case. > > I dont get a GUI when I try startx. The log file generated is below. From > the log it looks like the Intel driver and vesa driver are both being > loaded. The Intel driver, of course, does not support this GPU. > > I think this is the error: > (EE) VESA(0): V_BIOS address 0x19a60 out of range > > How can I get X running with VESA? > > Just in case it makes a difference - I am not booting using UEFI (legacy > mode only). > > Thanks > Hrishi > > [ 137.074] (--) checkDevMem: using aperture driver /dev/xf86 > [ 137.083] (--) Using wscons driver on /dev/ttyC4 > [ 137.096] > X.Org X Server 1.18.4 > Release Date: 2016-07-19 > [ 137.096] X Protocol Version 11, Revision 0 > [ 137.096] Build Operating System: OpenBSD 6.1 amd64 > [ 137.096] Current Operating System: OpenBSD nuc.my.domain 6.1 > GENERIC.MP#20 amd64 > [ 137.096] Build Date: 01 April 2017 02:00:27PM > [ 137.096] > [ 137.096] Current version of pixman: 0.34.0 > [ 137.096] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 137.096] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 137.096] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 15 > 16:28:33 2017 > [ 137.098] (==) Using system config directory "/usr/X11R6/share/X11/xorg. > conf.d" > [ 137.098] (==) No Layout section. Using the first Screen section. > [ 137.098] (==) No screen section available. Using defaults. > [ 137.098] (**) |-->Screen "Default Screen Section" (0) > [ 137.098] (**) | |-->Monitor "<default monitor>" > [ 137.099] (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. > [ 137.099] (==) Disabling SIGIO handlers for input devices > [ 137.099] (==) Automatically adding devices > [ 137.099] (==) Automatically enabling devices > [ 137.099] (==) Not automatically adding GPU devices > [ 137.099] (==) Max clients allowed: 256, resource mask: 0x1fffff > [ 137.104] (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 137.104] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 137.104] (II) The server relies on wscons to provide the list of input > devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > [ 137.104] (II) Loader magic: 0x1c42a7433020 > [ 137.104] (II) Module ABI versions: > [ 137.104] X.Org ANSI C Emulation: 0.4 > [ 137.104] X.Org Video Driver: 20.0 > [ 137.104] X.Org XInput driver : 22.1 > [ 137.104] X.Org Server Extension : 9.0 > [ 137.104] (--) PCI:*(0:0:2:0) 8086:193b:8086:2064 rev 9, Mem @ > 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64 > [ 137.104] (II) LoadModule: "glx" > [ 137.106] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 137.114] (II) Module glx: vendor="X.Org Foundation" > [ 137.114] compiled for 1.18.4, module version = 1.0.0 > [ 137.114] ABI class: X.Org Server Extension, version 9.0 > [ 137.114] (==) AIGLX enabled > [ 137.114] (==) Matched intel as autoconfigured driver 0 > [ 137.114] (==) Matched vesa as autoconfigured driver 1 > [ 137.114] (==) Assigned the driver to the xf86ConfigLayout > [ 137.114] (II) LoadModule: "intel" > [ 137.114] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so > [ 137.116] (II) Module intel: vendor="X.Org Foundation" > [ 137.116] compiled for 1.18.4, module version = 2.99.916 > [ 137.116] Module class: X.Org Video Driver > [ 137.116] ABI class: X.Org Video Driver, version 20.0 > [ 137.116] (II) LoadModule: "vesa" > [ 137.117] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so > [ 137.117] (II) Module vesa: vendor="X.Org Foundation" > [ 137.117] compiled for 1.18.4, module version = 2.3.4 > [ 137.117] Module class: X.Org Video Driver > [ 137.117] ABI class: X.Org Video Driver, version 20.0 > [ 137.117] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: > i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, > 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, > Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, > Q33, > GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 > [ 137.117] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 > [ 137.117] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 > [ 137.117] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, > 6200, P6300 > [ 137.117] (II) VESA: driver for VESA chipsets: vesa > [ 137.118] (II) Loading sub module "vbe" > [ 137.118] (II) LoadModule: "vbe" > [ 137.119] (II) Loading /usr/X11R6/lib/modules/libvbe.so > [ 137.119] (II) Module vbe: vendor="X.Org Foundation" > [ 137.120] compiled for 1.18.4, module version = 1.1.0 > [ 137.120] ABI class: X.Org Video Driver, version 20.0 > [ 137.120] (II) Loading sub module "int10" > [ 137.120] (II) LoadModule: "int10" > [ 137.120] (II) Loading /usr/X11R6/lib/modules/libint10.so > [ 137.121] (II) Module int10: vendor="X.Org Foundation" > [ 137.121] compiled for 1.18.4, module version = 1.0.0 > [ 137.121] ABI class: X.Org Video Driver, version 20.0 > [ 137.121] (II) VESA(0): initializing int10 > [ 137.122] (EE) VESA(0): V_BIOS address 0x19a60 out of range > [ 137.122] (II) UnloadModule: "vesa" > [ 137.122] (II) UnloadSubModule: "int10" > [ 137.122] (II) Unloading int10 > [ 137.122] (II) UnloadSubModule: "vbe" > [ 137.122] (II) Unloading vbe > [ 137.122] (EE) Screen(s) found, but none have a usable configuration. > [ 137.122] (EE) > Fatal server error: > [ 137.122] (EE) no screens found(EE) > [ 137.122] (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 137.122] (EE) Please also check the log file at "/var/log/Xorg.0.log" > for additional information. > [ 137.122] (EE) > [ 137.122] (EE) Server terminated with error (1). Closing log file.
