Hello ! I installed OpenBSD 6.1-current on a ThinkPad w541 (last 2 dmesgs are below) without problems. iwm works without problems and from time to time I see the message
cd0(ahci0:5:0): Check Condition (error 0x70) on opcode 0x0 SENSE KEY: Not Ready at the console. I use the drive only to rip audio cds also without problems. Do I have to care about the message ? During the last 3 upgrades using bsd.rd I got at boot the following boot messages iwm0: could not read firmware iwm-7260-16 (error 2) iwm0: failed to load init firmware and during the upgrade script after mounting the root filesystem iwm0: hw rev 0x140, fw ver 16.242414.0, address cc:3d:82:52:2b:5a iwm0: could send power command (error 35) iwm0: device timeout iwm0: device timeout SIOCSIFFLAGS: Resource temporarily unavailable iwm0: no link .... sleeping I left the upgrade script, run ifconfig (the settings from hostname.iwm0 are readed) and, dhclient iwm0. In the last 2 snapshots (before today IIRC April 11 and 14) I got after the first try a link. At the snapshot from today I need 3 or 4 tries to get a link. Later I got the information, that the list of mirrors could not be downloaded from ftp.openbsd.org which was also no problem as the last mirror was saved. Booth things are no problem but I thought I ask about them. Thanks for answers. OpenBSD 6.1-current (GENERIC.MP) #55: Fri Apr 14 13:54:33 MDT 2017 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 33938599936 (32366MB) avail mem = 32905347072 (31380MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7cd2d000 (69 entries) bios0: vendor LENOVO version "GNET81WW (2.29 )" date 11/24/2016 bios0: LENOVO 20EFS00B00 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI POAT ASF! BATB FPDT UEFI DMAR acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) EXP3(S4) XHCI(S3) EHC1(S3) EHC2(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2794.07 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: TSC frequency 2794073360 Hz cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 cpu4 at mainbus0: apid 4 (application processor) cpu4: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu4: 256KB 64b/line 8-way L2 cache cpu4: smt 0, core 2, package 0 cpu5 at mainbus0: apid 5 (application processor) cpu5: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu5: 256KB 64b/line 8-way L2 cache cpu5: smt 1, core 2, package 0 cpu6 at mainbus0: apid 6 (application processor) cpu6: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu6: 256KB 64b/line 8-way L2 cache cpu6: smt 0, core 3, package 0 cpu7 at mainbus0: apid 7 (application processor) cpu7: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu7: 256KB 64b/line 8-way L2 cache cpu7: smt 1, core 3, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus 4 (EXP3) acpiprt5 at acpi0: bus 6 (EXP5) acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu4 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu5 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu6 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu7 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 acpipwrres1 at acpi0: NVP3, resource for PEG_ acpipwrres2 at acpi0: NVP2, resource for PEG_ acpitz0 at acpi0: critical temperature is 200 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "LEN0071" at acpi0 not configured "LEN004A" at acpi0 not configured acpibat0 at acpi0: BAT0 model "45N1779" serial 1830 type LION oem "SANYO" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT340F" at acpi0 not configured acpivideo0 at acpi0: VID_ acpivout at acpivideo0 not configured acpivideo1 at acpi0: VID_ acpivout at acpivideo1 not configured cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2801, 2800, 2700, 2500, 2400, 2200, 2100, 1900, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800 MHz pci0 at mainbus0 bus 0 0:28:4: bridge mem address conflict 0xb8000000/0x16100000 0:28:4: bridge mem address conflict 0xd0000000/0x22000000 pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06 ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi pci1 at ppb0 bus 1 1:0:0: mem address conflict 0xfff80000/0x80000 vendor "NVIDIA", unknown product 0x11fc (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06 drm0 at inteldrm0 inteldrm0: msi inteldrm0: 1920x1080, 32bpp error: [drm:pid0:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi azalia0: No codecs found xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 1 com com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo com4: probed fifo depth: 0 bytes em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address 54:ee:75:49:9a:da ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 16 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi azalia1: codecs: Realtek ALC292 audio0 at azalia1 ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: msi pci2 at ppb1 bus 2 sdhc0 at pci2 dev 0 function 0 vendor "O2 Micro", unknown product 0x8520 rev 0x01: apic 2 int 16 sdhc0: SDHC 4.0, 208 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma ppb2 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi pci3 at ppb2 bus 3 iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0xbb, msi ppb3 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd4: msi pci5 at ppb4 bus 6 ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23 usb2 at ehci1: USB revision 2.0 uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM87 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s ahci0: port 5: 1.5Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, ST2000LM003 HN-M, 2BC1> SCSI3 0/direct fixed naa.50004cf210537a49 sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors cd0 at scsibus1 targ 5 lun 0: <HL-DT-ST, DVDRAM GU90N, LU20> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.1 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Keyboard" rev 1.10/64.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 2 configuration 1 interface 1 "Logitech USB Keyboard" rev 1.10/64.00 addr 2 uhidev1: iclass 3/0, 3 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0 ugen0 at uhub0 port 5 "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 3 ugen0: setting configuration index 0 failed uhidev2 at uhub0 port 6 configuration 1 interface 0 "Microsoft Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 4 uhidev2: iclass 3/1, 28 report ids ums0 at uhidev2 reportid 16: 5 buttons, Z and W dir wsmouse2 at ums0 mux 0 uhid3 at uhidev2 reportid 18: input=0, output=0, feature=1 uhid4 at uhidev2 reportid 19: input=1, output=0, feature=0 uhid5 at uhidev2 reportid 22: input=4, output=0, feature=0 uhid6 at uhidev2 reportid 23: input=0, output=0, feature=1 uhid7 at uhidev2 reportid 24: input=0, output=0, feature=1 uhid8 at uhidev2 reportid 28: input=1, output=0, feature=0 ugen1 at uhub0 port 7 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 5 umodem0 at uhub0 port 10 configuration 1 interface 1 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 umodem0: data interface 2, has CM over data, has break umodem0: status change notification available ucom0 at umodem0 umodem1 at uhub0 port 10 configuration 1 interface 3 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 umodem1: data interface 4, has CM over data, has break umodem1: status change notification available ucom1 at umodem1 umb0 at uhub0 port 10 configuration 1 interface 6 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 umodem2 at uhub0 port 10 configuration 1 interface 9 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 umodem2: data interface 10, has CM over data, has break umodem2: status change notification available ucom2 at umodem2 ugen2 at uhub0 port 10 configuration 1 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 ugen3 at uhub0 port 11 "Intel product 0x07dc" rev 2.00/0.01 addr 7 uvideo0 at uhub0 port 12 configuration 1 interface 0 "SunplusIT INC. Integrated Camera" rev 2.00/0.03 addr 8 video0 at uvideo0 uhidev3 at uhub0 port 13 configuration 1 interface 0 "vendor 0x0765 product 0x5010" rev 2.00/0.00 addr 9 uhidev3: iclass 3/0 uhid9 at uhidev3: input=8, output=8, feature=0 uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2 uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd1: 1907726MB, 512 bytes/sector, 3907023473 sectors root on sd1a (7b385b1888af6492.a) swap on sd1b dump on sd1b iwm0: hw rev 0x140, fw ver 16.242414.0, address cc:3d:82:52:2b:5a error: [drm:pid26441:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns error: [drm:pid26441:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns cd0(ahci0:5:0): Check Condition (error 0x70) on opcode 0x0 SENSE KEY: Not Ready ugen3 detached ugen3 at uhub0 port 11 "Intel product 0x07dc" rev 2.00/0.01 addr 7 error: [drm:pid34690:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns syncing disks... done sd1 detached rebooti OpenBSD 6.1-current (RAMDISK_CD) #60: Sun Apr 16 14:22:30 MDT 2017 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 33938599936 (32366MB) avail mem = 32906276864 (31381MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7cd2d000 (69 entries) bios0: vendor LENOVO version "GNET81WW (2.29 )" date 11/24/2016 bios0: LENOVO 20EFS00B00 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI POAT ASF! BATB FPDT UEFI DMAR acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2794.06 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: TSC frequency 2794057480 Hz cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus 4 (EXP3) acpiprt5 at acpi0: bus 6 (EXP5) acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpitz at acpi0 not configured "PNP0C0D" at acpi0 not configured "PNP0C0E" at acpi0 not configured "LEN0071" at acpi0 not configured "LEN004A" at acpi0 not configured "PNP0C0A" at acpi0 not configured "ACPI0003" at acpi0 not configured "LEN0068" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT340F" at acpi0 not configured pci0 at mainbus0 bus 0 0:28:4: bridge mem address conflict 0xb8000000/0x16100000 0:28:4: bridge mem address conflict 0xd0000000/0x22000000 pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06 ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi pci1 at ppb0 bus 1 1:0:0: mem address conflict 0xfff80000/0x80000 vendor "NVIDIA", unknown product 0x11fc (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06 wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) "Intel Core 4G HD Audio" rev 0x06 at pci0 dev 3 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured "Intel 8 Series KT" rev 0x04 at pci0 dev 22 function 3 not configured em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address 54:ee:75:49:9a:da ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 16 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel 8 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: msi pci2 at ppb1 bus 2 sdhc0 at pci2 dev 0 function 0 vendor "O2 Micro", unknown product 0x8520 rev 0x01: apic 2 int 16 sdhc0: SDHC 4.0, 208 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma ppb2 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi pci3 at ppb2 bus 3 iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0xbb, msi ppb3 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd4: msi pci5 at ppb4 bus 6 ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23 usb2 at ehci1: USB revision 2.0 uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel QM87 LPC" rev 0x04 at pci0 dev 31 function 0 not configured ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s ahci0: port 5: 1.5Gb/s scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST2000LM003 HN-M, 2BC1> SCSI3 0/direct fixed naa.50004cf210537a49 sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GU90N, LU20> ATAPI 5/cdrom removable "Intel 8 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay1 uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Keyboard" rev 1.10/64.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay1 uhidev1 at uhub0 port 2 configuration 1 interface 1 "Logitech USB Keyboard" rev 1.10/64.00 addr 2 uhidev1: iclass 3/0, 3 report ids uhid at uhidev1 reportid 1 not configured uhid at uhidev1 reportid 2 not configured uhid at uhidev1 reportid 3 not configured "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 3 at uhub0 port 5 not configured uhidev2 at uhub0 port 6 configuration 1 interface 0 "Microsoft Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 4 uhidev2: iclass 3/1, 28 report ids uhid at uhidev2 reportid 16 not configured uhid at uhidev2 reportid 18 not configured uhid at uhidev2 reportid 19 not configured uhid at uhidev2 reportid 22 not configured uhid at uhidev2 reportid 23 not configured uhid at uhidev2 reportid 24 not configured uhid at uhidev2 reportid 28 not configured "vendor 0x138a product 0x0017" rev 1.10/0.78 addr 5 at uhub0 port 7 not configured "Lenovo N5321 gw" rev 2.00/0.00 addr 6 at uhub0 port 10 not configured "vendor 0x8087 product 0x07dc" rev 2.00/0.01 addr 7 at uhub0 port 11 not configured "SunplusIT INC. Integrated Camera" rev 2.00/0.03 addr 8 at uhub0 port 12 not configured uhidev3 at uhub0 port 13 configuration 1 interface 0 "vendor 0x0765 product 0x5010" rev 2.00/0.00 addr 9 uhidev3: iclass 3/0 uhid at uhidev3 not configured uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x8008" rev 2.00/0.04 addr 2 uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x8000" rev 2.00/0.04 addr 2 softraid0 at root scsibus1 at softraid0: 256 targets sd1 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd1: 1907726MB, 512 bytes/sector, 3907023473 sectors root on rd0a swap on rd0b dump on rd0b iwm0: could not read firmware iwm-7260-16 (error 2) iwm0: failed to load init firmware iwm0: hw rev 0x140, fw ver 16.242414.0, address cc:3d:82:52:2b:5a iwm0: could send power command (error 35) iwm0: device timeout iwm0: device timeout iwm0: could send power command (error 35) iwm0: device timeout iwm0: device timeout iwm0: could send power command (error 35) iwm0: device timeout iwm0: device timeout syncing disks... OpenBSD 6.1-current (GENERIC.MP) #60: Sun Apr 16 10:46:06 MDT 2017 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 33938599936 (32366MB) avail mem = 32905347072 (31380MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7cd2d000 (69 entries) bios0: vendor LENOVO version "GNET81WW (2.29 )" date 11/24/2016 bios0: LENOVO 20EFS00B00 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI POAT ASF! BATB FPDT UEFI DMAR acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) EXP3(S4) XHCI(S3) EHC1(S3) EHC2(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2794.05 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: TSC frequency 2794047200 Hz cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 cpu4 at mainbus0: apid 4 (application processor) cpu4: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu4: 256KB 64b/line 8-way L2 cache cpu4: smt 0, core 2, package 0 cpu5 at mainbus0: apid 5 (application processor) cpu5: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu5: 256KB 64b/line 8-way L2 cache cpu5: smt 1, core 2, package 0 cpu6 at mainbus0: apid 6 (application processor) cpu6: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu6: 256KB 64b/line 8-way L2 cache cpu6: smt 0, core 3, package 0 cpu7 at mainbus0: apid 7 (application processor) cpu7: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 2793.53 MHz cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT cpu7: 256KB 64b/line 8-way L2 cache cpu7: smt 1, core 3, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus 4 (EXP3) acpiprt5 at acpi0: bus 6 (EXP5) acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu4 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu5 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu6 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu7 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 acpipwrres1 at acpi0: NVP3, resource for PEG_ acpipwrres2 at acpi0: NVP2, resource for PEG_ acpitz0 at acpi0: critical temperature is 200 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "LEN0071" at acpi0 not configured "LEN004A" at acpi0 not configured acpibat0 at acpi0: BAT0 model "45N1779" serial 1830 type LION oem "SANYO" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT340F" at acpi0 not configured acpivideo0 at acpi0: VID_ acpivout at acpivideo0 not configured acpivideo1 at acpi0: VID_ acpivout at acpivideo1 not configured cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2801, 2800, 2700, 2500, 2400, 2200, 2100, 1900, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800 MHz pci0 at mainbus0 bus 0 0:28:4: bridge mem address conflict 0xb8000000/0x16100000 0:28:4: bridge mem address conflict 0xd0000000/0x22000000 pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06 ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi pci1 at ppb0 bus 1 1:0:0: mem address conflict 0xfff80000/0x80000 vendor "NVIDIA", unknown product 0x11fc (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06 drm0 at inteldrm0 inteldrm0: msi inteldrm0: 1920x1080, 32bpp error: [drm:pid0:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi azalia0: No codecs found xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 1 com com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo com4: probed fifo depth: 0 bytes em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address 54:ee:75:49:9a:da ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 16 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi azalia1: codecs: Realtek ALC292 audio0 at azalia1 ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: msi pci2 at ppb1 bus 2 sdhc0 at pci2 dev 0 function 0 vendor "O2 Micro", unknown product 0x8520 rev 0x01: apic 2 int 16 sdhc0: SDHC 4.0, 208 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma ppb2 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi pci3 at ppb2 bus 3 iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0xbb, msi ppb3 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd4: msi pci5 at ppb4 bus 6 ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23 usb2 at ehci1: USB revision 2.0 uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM87 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s ahci0: port 5: 1.5Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, ST2000LM003 HN-M, 2BC1> SCSI3 0/direct fixed naa.50004cf210537a49 sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors cd0 at scsibus1 targ 5 lun 0: <HL-DT-ST, DVDRAM GU90N, LU20> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.1 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Keyboard" rev 1.10/64.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 2 configuration 1 interface 1 "Logitech USB Keyboard" rev 1.10/64.00 addr 2 uhidev1: iclass 3/0, 3 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0 ugen0 at uhub0 port 5 "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 3 ugen0: setting configuration index 0 failed uhidev2 at uhub0 port 6 configuration 1 interface 0 "Microsoft Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 4 uhidev2: iclass 3/1, 28 report ids ums0 at uhidev2 reportid 16: 5 buttons, Z and W dir wsmouse2 at ums0 mux 0 uhid3 at uhidev2 reportid 18: input=0, output=0, feature=1 uhid4 at uhidev2 reportid 19: input=1, output=0, feature=0 uhid5 at uhidev2 reportid 22: input=4, output=0, feature=0 uhid6 at uhidev2 reportid 23: input=0, output=0, feature=1 uhid7 at uhidev2 reportid 24: input=0, output=0, feature=1 uhid8 at uhidev2 reportid 28: input=1, output=0, feature=0 ugen1 at uhub0 port 7 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 5 umodem0 at uhub0 port 10 configuration 1 interface 1 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 umodem0: data interface 2, has CM over data, has break umodem0: status change notification available ucom0 at umodem0 umodem1 at uhub0 port 10 configuration 1 interface 3 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 umodem1: data interface 4, has CM over data, has break umodem1: status change notification available ucom1 at umodem1 umb0 at uhub0 port 10 configuration 1 interface 6 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 umodem2 at uhub0 port 10 configuration 1 interface 9 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 umodem2: data interface 10, has CM over data, has break umodem2: status change notification available ucom2 at umodem2 ugen2 at uhub0 port 10 configuration 1 "Lenovo N5321 gw" rev 2.00/0.00 addr 6 ugen3 at uhub0 port 11 "Intel product 0x07dc" rev 2.00/0.01 addr 7 uvideo0 at uhub0 port 12 configuration 1 interface 0 "SunplusIT INC. Integrated Camera" rev 2.00/0.03 addr 8 video0 at uvideo0 uhidev3 at uhub0 port 13 configuration 1 interface 0 "vendor 0x0765 product 0x5010" rev 2.00/0.00 addr 9 uhidev3: iclass 3/0 uhid9 at uhidev3: input=8, output=8, feature=0 uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2 uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd1: 1907726MB, 512 bytes/sector, 3907023473 sectors root on sd1a (7b385b1888af6492.a) swap on sd1b dump on sd1b iwm0: hw rev 0x140, fw ver 16.242414.0, address cc:3d:82:52:2b:5a error: [drm:pid26647:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns error: [drm:pid26647:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns hw.sensors.cpu0.temp0=51.00 degC hw.sensors.acpitz0.temp0=52.00 degC (zone temperature) hw.sensors.acpibtn0.indicator0=On (lid open) hw.sensors.acpibat0.volt0=10.80 VDC (voltage) hw.sensors.acpibat0.volt1=12.24 VDC (current voltage) hw.sensors.acpibat0.power0=0.00 W (rate) hw.sensors.acpibat0.watthour0=89.57 Wh (last full capacity) hw.sensors.acpibat0.watthour1=4.48 Wh (warning capacity) hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity) hw.sensors.acpibat0.watthour3=87.68 Wh (remaining capacity), OK hw.sensors.acpibat0.watthour4=99.47 Wh (design capacity) hw.sensors.acpibat0.raw0=0 (battery idle), OK hw.sensors.acpiac0.indicator0=On (power supply) hw.sensors.acpithinkpad0.temp0=52.00 degC hw.sensors.acpithinkpad0.temp1=52.00 degC hw.sensors.acpithinkpad0.temp2=52.00 degC hw.sensors.acpithinkpad0.temp3=52.00 degC hw.sensors.acpithinkpad0.temp4=52.00 degC hw.sensors.acpithinkpad0.temp5=52.00 degC hw.sensors.acpithinkpad0.temp6=52.00 degC hw.sensors.acpithinkpad0.temp7=52.00 degC hw.sensors.acpithinkpad0.fan0=1637 RPM hw.sensors.softraid0.drive0=online (sd1), OK EOF