> Jan Stary <[email protected]> hat am 22. Mai 2017 um 10:41 geschrieben: > > > Sorry for the long post. > > This is current/amd64 on a MacBook2,1 (model A1181), dmesg below. > I experience the same on a MacBook1,1 running current/i386. > > On the console, each of apm -S -z -Z works, closing the lid as well. > Each of them also resumes as expected. > > On the other hand, trying to get to sleep from an xterm > (via apm -S or -z or -Z) does not fully resume: upon resuming, > X gets killed, the console keyboard does not reconnect properly, > and keyboard input becomes garbage. There is nothing to do but > press the power button to reboot. (Or do it remotely.) > > As the symptoms are the same for standby, suspend and hibernate, > I will use suspend (apm -z) in the examples. > > /var/log/messages of the console resume (good) > and the X resume (bad) seem mostly the same (both below), > except the naming order of the u* device being (re)attached; > and the messages from the X suspend have some extra newlines > in the middle of the message lines (which seems strange). > Here is the diff lines (minus the leading timestamps): > > --- apm.good Mon May 22 09:45:56 2017 > +++ apm.bad Mon May 22 09:46:00 2017 > > -uhub0 detached > +uhub2 detached > > -uhub2 detached > +uhub3 detached > > -uhub3 detached > +uhub4 detached > > -uhub4 detached > +uhub0 detached > > -uhidev1 at uhub0 port 2 configuration 1 interface 1 "Apple Computer Apple > Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2 > +uhidev1 at uhub0 > + port 2 configuration 1 interface 1 "Apple Computer Apple Internal > Keyboard / Trackpad" rev 2.00/0.18 addr 2 > > -uhid2 at uhidev3 reportid 37: input=4, output=0, feature=0 > +uhid2 at uhidev3 reportid 37 > +: input=4, output=0, feature=0 > > > Please also see the Xorg log of the killed X session below. > Firstly, it complains about /dev/xf86 and /dev/mem > and asks for 'machdep.allowaperture=1'. > > (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem > (Operation not permitted) > Check that you have set 'machdep.allowaperture=1' > > Is that expected with inteldrm(4)? > Is that related to the following drm errors in dmesg? > Can it be related to the X not resuming? > > drm: render error detected, EIR: 0x00000010 > drm: page table error > drm: PGTBL_ER: 0x00000102 > error: [drm:pid0:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, > masking > drm: render error detected, EIR: 0x00000010 > drm: page table error > drm: PGTBL_ER: 0x00000102 > > The X log also says: > > (II) The server relies on wscons to provide the list of input devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > > and later ends (when X gets killed upon resume) with > > Fatal server error: > [ 257.752] (EE) can't switch keyboard to raw mode. > Enable support for it in the kernel or use for example: > > Option "Protocol" "wskbd" > Option "Device" "/dev/wskbd0" > > in your xorg.conf(5) file > > > I don't have a xorg.conf, because X works just fine beside this. > Apparently, it has something to do with reattaching the wskbd, > but that's way over my head. How do I enable support for > "raw keyboard mode" in the kernel (it that's my problem)? > > How can I help debug this? > > Jan > > > boot dmesg: > > OpenBSD 6.1-current (GENERIC.MP) #0: Sat May 20 12:31:37 CEST 2017 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 3171909632 (3024MB) > avail mem = 3070050304 (2927MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (37 entries) > bios0: vendor Apple Inc. version "MB21.88Z.00A5.B07.0706270922" date 06/27/07 > bios0: Apple Inc. MacBook2,1 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT > acpi0: wakeup devices ADP1(S3) LID0(S3) PXS1(S4) PXS2(S4) USB1(S3) USB2(S3) > USB3(S3) USB4(S3) USB7(S3) EC__(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz, 2161.65 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 166MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz, 2161.25 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR > cpu1: 4MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 3 (PCIB) > acpicpu0 at acpi0: !C3(100@55 mwait@0x31), !C2(500@1 mwait@0x10), C1(1000@1 > mwait), PSS > acpicpu1 at acpi0: !C3(100@55 mwait@0x31), !C2(500@1 mwait@0x10), C1(1000@1 > mwait), PSS > acpisbs0 at acpi0: SBS0 model "ASMB016" serial 19351 type LION oem "DP" > acpiac0 at acpi0: AC unit offline > acpibtn0 at acpi0: LID0 > "APP0002" at acpi0 not configured > acpibtn1 at acpi0: PWRB > acpibtn2 at acpi0: SLPB > "APP0001" at acpi0 not configured > "APP0003" at acpi0 not configured > "ACPI0001" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > cpu0: Enhanced SpeedStep 2161 MHz: speeds: 2167, 2000, 1833, 1667, 1500, > 1333, 1000 MHz > memory map conflict 0xbef00000/0x100000 > memory map conflict 0xbf000000/0x1000000 > memory map conflict 0xf00f8000/0x1000 > memory map conflict 0xfed1c000/0x4000 > memory map conflict 0xfffb0000/0x30000 > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 > inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 > inteldrm0: apic 1 int 16 > inteldrm0: 1280x800, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and > Frequency, rev 0x03) at pci0 dev 7 function 0 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi > azalia0: codecs: Sigmatel STAC9220/1 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi > pci1 at ppb0 bus 1 > mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC > rev. A3 (0x2): msi > msk0 at mskc0 port A: address 00:1b:63:36:2b:5d > eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi > pci2 at ppb1 bus 2 > athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 1 int 17 > athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 4, address > 00:1c:b3:c4:b2:ae > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 21 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 21 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci3 at ppb2 bus 3 > "AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured > pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-R UJ-857E, ZB0E> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 1 int 19 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 1: <ST980811AS> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int > 19 > iic0 at ichiic0 > iic0: addr 0x48 00=2f 01=00 02=4b 03=50 words 00=2e80 01=00ff 02=4b00 03=5000 > 04=ffff 05=ffff 06=ffff 07=ffff > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > isa0 at pcib0 > isadma0 at isa0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > asmc0 at isa0 port 0x300/32: rev 1.17f517, 226 keys > vmm0 at mainbus0: VMX > drm: render error detected, EIR: 0x00000010 > drm: page table error > drm: PGTBL_ER: 0x00000102 > error: [drm:pid0:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, > masking > drm: render error detected, EIR: 0x00000010 > drm: page table error > drm: PGTBL_ER: 0x00000102 > uvideo0 at uhub0 port 4 configuration 1 interface 0 "Apple Computer > Bluetooth" rev 2.00/0.0c addr 2 > uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple Computer Apple > Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 13 > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple Computer Apple > Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2 > uhidev1: iclass 3/1, 5 report ids > ums0 at uhidev1 reportid 2: 3 buttons > wsmouse0 at ums0 mux 0 > ums1 at uhidev1 reportid 5 > ums1: mouse has no X report > uhidev2 at uhub1 port 2 configuration 1 interface 2 "Apple Computer Apple > Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2 > uhidev2: iclass 3/0 > uhid0 at uhidev2: input=1, output=0, feature=0 > uhidev3 at uhub3 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR > Receiver" rev 2.00/1.10 addr 2 > uhidev3: iclass 3/0, 38 report ids > uhid1 at uhidev3 reportid 36: input=4, output=0, feature=0 > uhid2 at uhidev3 reportid 37: input=4, output=0, feature=0 > uhid3 at uhidev3 reportid 38: input=4, output=0, feature=0 > uhidev4 at uhub4 port 1 configuration 1 interface 0 "Apple Computer > HID-proxy" rev 2.00/19.65 addr 2 > uhidev4: iclass 3/1 > ukbd1 at uhidev4: 8 variable keys, 6 key codes > wskbd1 at ukbd1 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev5 at uhub4 port 1 configuration 1 interface 1 "Apple Computer > HID-proxy" rev 2.00/19.65 addr 2 > uhidev5: iclass 3/1 > ums2 at uhidev5: 5 buttons > wsmouse1 at ums2 mux 0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed > sd0: 20821MB, 512 bytes/sector, 42642928 sectors > root on sd0a (075497a4ce516f3d.a) swap on sd0b dump on sd0b > uvideo0 detached > uvideo0 at uhub0 port 4 configuration 1 interface 0 "Micron Built-in iSight" > rev 2.00/1.84 addr 2 > video0 at uvideo0 > > > apm -z from the console (resumes fine): > > May 21 00:33:14 macbook apmd: system suspending > May 21 00:33:15 macbook /bsd: ukbd0: was console keyboard > May 21 00:33:15 macbook /bsd: wskbd0 detached > May 21 00:33:15 macbook /bsd: ukbd0 detached > May 21 00:33:15 macbook /bsd: uhidev0 detached > May 21 00:33:15 macbook /bsd: wsmouse0 detached > May 21 00:33:15 macbook /bsd: ums0 detached > May 21 00:33:15 macbook /bsd: ums1 detached > May 21 00:33:15 macbook /bsd: uhidev1 detached > May 21 00:33:15 macbook /bsd: uhid0 detached > May 21 00:33:15 macbook /bsd: uhidev2 detached > May 21 00:33:15 macbook /bsd: uhub0 detached > May 21 00:33:15 macbook /bsd: uhub1 detached > May 21 00:33:15 macbook /bsd: uhid1 detached > May 21 00:33:15 macbook /bsd: uhid2 detached > May 21 00:33:15 macbook /bsd: uhid3 detached > May 21 00:33:15 macbook /bsd: uhidev3 detached > May 21 00:33:15 macbook /bsd: uhub2 detached > May 21 00:33:15 macbook /bsd: wskbd1: disconnecting from wsdisplay0 > May 21 00:33:30 macbook /bsd: wskbd1 detached > May 21 00:33:30 macbook /bsd: ukbd1 detached > May 21 00:33:30 macbook /bsd: uhidev4 detached > May 21 00:33:30 macbook /bsd: wsmouse1 detached > May 21 00:33:30 macbook /bsd: ums2 detached > May 21 00:33:30 macbook /bsd: uhidev5 detached > May 21 00:33:30 macbook /bsd: uhub3 detached > May 21 00:33:30 macbook /bsd: video0 detached > May 21 00:33:30 macbook /bsd: uvideo0 detached > May 21 00:33:30 macbook /bsd: uhub4 detached > May 21 00:33:30 macbook /bsd: uhub0 at usb1 configuration 1 interface 0 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > May 21 00:33:30 macbook /bsd: uhub1 at usb2 configuration 1 interface 0 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > May 21 00:33:30 macbook /bsd: uhub2 at usb3 configuration 1 interface 0 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > May 21 00:33:30 macbook /bsd: uhub3 at usb4 configuration 1 interface 0 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > May 21 00:33:30 macbook /bsd: uhub4 at usb0 configuration 1 interface 0 > "Intel EHCI root hub" rev 2.00/1.00 addr 1 > May 21 00:33:30 macbook apmd: system resumed from sleep > May 21 00:33:31 macbook /bsd: uvideo0 at uhub4 port 4 configuration 1 > interface 0 "Micron Built-in iSight" rev 2.00/1.84 addr 2 > May 21 00:33:31 macbook /bsd: video0 at uvideo0 > May 21 00:33:33 macbook /bsd: uhidev0 at uhub0 port 2 configuration 1 > interface 0 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 > addr 2 > May 21 00:33:33 macbook /bsd: uhidev0: iclass 3/1 > May 21 00:33:33 macbook /bsd: ukbd0 at uhidev0: 8 variable keys, 5 key codes, > country code 13 > May 21 00:33:33 macbook /bsd: wskbd0 at ukbd0: console keyboard, using > wsdisplay0 > May 21 00:33:33 macbook /bsd: uhidev1 at uhub0 port 2 configuration 1 > interface 1 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 > addr 2 > May 21 00:33:33 macbook /bsd: uhidev1: iclass 3/1, 5 report ids > May 21 00:33:33 macbook /bsd: ums0 at uhidev1 reportid 2: 3 buttons > May 21 00:33:33 macbook /bsd: wsmouse0 at ums0 mux 0 > May 21 00:33:33 macbook /bsd: ums1 at uhidev1 reportid 5 > May 21 00:33:33 macbook /bsd: ums1: mouse has no X report > May 21 00:33:33 macbook /bsd: uhidev2 at uhub0 port 2 configuration 1 > interface 2 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 > addr 2 > May 21 00:33:33 macbook /bsd: uhidev2: iclass 3/0 > May 21 00:33:33 macbook /bsd: uhid0 at uhidev2: input=1, output=0, feature=0 > May 21 00:33:34 macbook /bsd: uhidev3 at uhub2 port 2 configuration 1 > interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/1.10 addr 2 > May 21 00:33:34 macbook /bsd: uhidev3: iclass 3/0, 38 report ids > May 21 00:33:34 macbook /bsd: uhid1 at uhidev3 reportid 36: input=4, > output=0, feature=0 > May 21 00:33:34 macbook /bsd: uhid2 at uhidev3 reportid 37: input=4, > output=0, feature=0 > May 21 00:33:34 macbook /bsd: uhid3 at uhidev3 reportid 38: input=4, > output=0, feature=0 > May 21 00:33:35 macbook /bsd: uhidev4 at uhub3 port 1 configuration 1 > interface 0 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 > May 21 00:33:35 macbook /bsd: uhidev4: iclass 3/1 > May 21 00:33:35 macbook /bsd: ukbd1 at uhidev4: 8 variable keys, 6 key codes > May 21 00:33:35 macbook /bsd: wskbd1 at ukbd1 mux 1 > May 21 00:33:35 macbook /bsd: wskbd1: connecting to wsdisplay0 > May 21 00:33:35 macbook /bsd: uhidev5 at uhub3 port 1 configuration 1 > interface 1 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 > May 21 00:33:36 macbook /bsd: uhidev5: iclass 3/1 > May 21 00:33:36 macbook /bsd: ums2 at uhidev5: 5 buttons > May 21 00:33:36 macbook /bsd: wsmouse1 at ums2 mux 0 > > > apm -z from an xterm (kills X upon resume, does not connect keyboard): > > May 21 00:43:35 macbook apmd: system suspending > May 21 00:43:37 macbook /bsd: ukbd0: was console keyboard > May 21 00:43:37 macbook /bsd: wskbd0 detached > May 21 00:43:37 macbook /bsd: ukbd0 detached > May 21 00:43:37 macbook /bsd: uhidev0 detached > May 21 00:43:37 macbook /bsd: wsmouse0 detached > May 21 00:43:37 macbook /bsd: ums0 detached > May 21 00:43:37 macbook /bsd: ums1 detached > May 21 00:43:37 macbook /bsd: uhidev1 detached > May 21 00:43:37 macbook /bsd: uhid0 detached > May 21 00:43:37 macbook /bsd: uhidev2 detached > May 21 00:43:37 macbook /bsd: uhub1 detached > May 21 00:43:37 macbook /bsd: uhub2 detached > May 21 00:43:37 macbook /bsd: uhid1 detached > May 21 00:43:37 macbook /bsd: uhid2 detached > May 21 00:43:37 macbook /bsd: uhid3 detached > May 21 00:43:37 macbook /bsd: uhidev3 detached > May 21 00:43:37 macbook /bsd: uhub3 detached > May 21 00:43:38 macbook /bsd: wskbd1: disconnecting from wsdisplay0 > May 21 00:43:49 macbook /bsd: wskbd1 detached > May 21 00:43:49 macbook /bsd: ukbd1 detached > May 21 00:43:49 macbook /bsd: uhidev4 detached > May 21 00:43:49 macbook /bsd: wsmouse1 detached > May 21 00:43:49 macbook /bsd: ums2 detached > May 21 00:43:49 macbook /bsd: uhidev5 detached > May 21 00:43:49 macbook /bsd: uhub4 detached > May 21 00:43:49 macbook /bsd: video0 detached > May 21 00:43:49 macbook /bsd: uvideo0 detached > May 21 00:43:49 macbook /bsd: uhub0 detached > May 21 00:43:49 macbook /bsd: uhub0 at usb1 configuration 1 interface 0 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > May 21 00:43:49 macbook /bsd: uhub1 at usb2 configuration 1 interface 0 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > May 21 00:43:49 macbook /bsd: uhub2 at usb3 configuration 1 interface 0 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > May 21 00:43:49 macbook /bsd: uhub3 at usb4 configuration 1 interface 0 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > May 21 00:43:49 macbook /bsd: uhub4 at usb0 configuration 1 interface 0 > "Intel EHCI root hub" rev 2.00/1.00 addr 1 > May 21 00:43:49 macbook apmd: system resumed from sleep > > (This is where X gets killed; > the first messages seen on console after that is:) > > May 21 00:43:51 macbook /bsd: uvideo0 at uhub4 port 4 configuration 1 > interface 0 "Micron Built-in iSight" rev 2.00/1.84 addr 2 > May 21 00:43:51 macbook /bsd: video0 at uvideo0 > May 21 00:43:53 macbook /bsd: uhidev0 at uhub0 port 2 configuration 1 > interface 0 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 > addr 2 > May 21 00:43:53 macbook /bsd: uhidev0: iclass 3/1 > May 21 00:43:53 macbook /bsd: ukbd0 at uhidev0: 8 variable keys, 5 key codes, > country code 13 > May 21 00:43:53 macbook /bsd: wskbd0 at ukbd0: console keyboard, using > wsdisplay0 > May 21 00:43:53 macbook /bsd: uhidev1 at uhub0 > May 21 00:43:53 macbook /bsd: port 2 configuration 1 interface 1 "Apple > Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2 > May 21 00:43:53 macbook /bsd: uhidev1: iclass 3/1, 5 report ids > May 21 00:43:53 macbook /bsd: ums0 at uhidev1 reportid 2: 3 buttons > May 21 00:43:53 macbook /bsd: wsmouse0 at ums0 mux 0 > May 21 00:43:53 macbook /bsd: ums1 at uhidev1 reportid 5 > May 21 00:43:53 macbook /bsd: ums1: mouse has no X report > May 21 00:43:53 macbook /bsd: uhidev2 at uhub0 port 2 configuration 1 > interface 2 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 > addr 2 > May 21 00:43:53 macbook /bsd: uhidev2: iclass 3/0 > May 21 00:43:53 macbook /bsd: uhid0 at uhidev2: input=1, output=0, feature=0 > May 21 00:43:54 macbook /bsd: uhidev3 at uhub2 port 2 configuration 1 > interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/1.10 addr 2 > May 21 00:43:54 macbook /bsd: uhidev3: iclass 3/0, 38 report ids > May 21 00:43:54 macbook /bsd: uhid1 at uhidev3 reportid 36: input=4, > output=0, feature=0 > May 21 00:43:54 macbook /bsd: uhid2 at uhidev3 reportid 37 > May 21 00:43:54 macbook /bsd: : input=4, output=0, feature=0 > May 21 00:43:54 macbook /bsd: uhid3 at uhidev3 reportid 38: input=4, > output=0, feature=0 > May 21 00:43:55 macbook /bsd: uhidev4 at uhub3 port 1 configuration 1 > interface 0 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 > May 21 00:43:55 macbook /bsd: uhidev4: iclass 3/1 > May 21 00:43:55 macbook /bsd: ukbd1 at uhidev4: 8 variable keys, 6 key codes > May 21 00:43:56 macbook /bsd: wskbd1 at ukbd1 mux 1 > May 21 00:43:56 macbook /bsd: wskbd1: connecting to wsdisplay0 > May 21 00:43:56 macbook /bsd: uhidev5 at uhub3 port 1 configuration 1 > interface 1 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 > May 21 00:43:56 macbook /bsd: uhidev5: iclass 3/1 > May 21 00:43:56 macbook /bsd: ums2 at uhidev5: 5 buttons > May 21 00:43:56 macbook /bsd: wsmouse1 at ums2 mux 0 > > > Xorg log of the killed session: > > [ 235.207] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem > (Operation not permitted) > Check that you have set 'machdep.allowaperture=1' > in /etc/sysctl.conf and reboot your machine > refer to xf86(4) for details > [ 235.207] linear framebuffer access unavailable > [ 235.228] (--) Using wscons driver on /dev/ttyC4 > [ 235.286] > X.Org X Server 1.18.4 > Release Date: 2016-07-19 > [ 235.286] X Protocol Version 11, Revision 0 > [ 235.286] Build Operating System: OpenBSD 6.1 amd64 > [ 235.286] Current Operating System: OpenBSD macbook.stare.cz 6.1 > GENERIC.MP#0 amd64 > [ 235.287] Build Date: 18 May 2017 08:10:36PM > [ 235.287] > [ 235.287] Current version of pixman: 0.34.0 > [ 235.287] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 235.287] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 235.287] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 21 00:43:27 > 2017 > [ 235.315] (==) Using system config directory > "/usr/X11R6/share/X11/xorg.conf.d" > [ 235.318] (==) No Layout section. Using the first Screen section. > [ 235.319] (==) No screen section available. Using defaults. > [ 235.319] (**) |-->Screen "Default Screen Section" (0) > [ 235.319] (**) | |-->Monitor "<default monitor>" > [ 235.324] (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. > [ 235.324] (==) Disabling SIGIO handlers for input devices > [ 235.325] (==) Automatically adding devices > [ 235.325] (==) Automatically enabling devices > [ 235.325] (==) Not automatically adding GPU devices > [ 235.333] (==) Max clients allowed: 256, resource mask: 0x1fffff > [ 235.533] (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 235.533] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 235.533] (II) The server relies on wscons to provide the list of input > devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > [ 235.546] (II) Loader magic: 0xbb30ea33020 > [ 235.546] (II) Module ABI versions: > [ 235.546] X.Org ANSI C Emulation: 0.4 > [ 235.546] X.Org Video Driver: 20.0 > [ 235.546] X.Org XInput driver : 22.1 > [ 235.546] X.Org Server Extension : 9.0 > [ 235.552] (--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 rev 3, Mem @ > 0xd0380000/524288, 0xc0000000/268435456, 0xd0400000/262144, I/O @ 0x000020e0/8 > [ 235.552] (--) PCI: (0:0:2:1) 8086:27a6:8086:7270 rev 3, Mem @ > 0xd0300000/524288 > [ 235.552] (II) LoadModule: "glx" > [ 235.585] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 235.748] (II) Module glx: vendor="X.Org Foundation" > [ 235.749] compiled for 1.18.4, module version = 1.0.0 > [ 235.749] ABI class: X.Org Server Extension, version 9.0 > [ 235.749] (==) AIGLX enabled > [ 235.749] (==) Matched intel as autoconfigured driver 0 > [ 235.749] (==) Matched vesa as autoconfigured driver 1 > [ 235.749] (==) Assigned the driver to the xf86ConfigLayout > [ 235.749] (II) LoadModule: "intel" > [ 235.750] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so > [ 235.811] (II) Module intel: vendor="X.Org Foundation" > [ 235.811] compiled for 1.18.4, module version = 2.99.916 > [ 235.811] Module class: X.Org Video Driver > [ 235.811] ABI class: X.Org Video Driver, version 20.0 > [ 235.811] (II) LoadModule: "vesa" > [ 235.812] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so > [ 235.828] (II) Module vesa: vendor="X.Org Foundation" > [ 235.828] compiled for 1.18.4, module version = 2.3.4 > [ 235.828] Module class: X.Org Video Driver > [ 235.828] ABI class: X.Org Video Driver, version 20.0 > [ 235.828] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: > i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, > 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, > Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, > GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 > [ 235.832] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 > [ 235.832] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 > [ 235.832] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, > 6200, P6300 > [ 235.832] (II) VESA: driver for VESA chipsets: vesa > [ 235.847] (II) intel(0): Using Kernel Mode Setting driver: i915, version > 1.6.0 20080730 > [ 235.852] (WW) Falling back to old probe method for vesa > [ 235.861] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM > [ 235.861] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3 > [ 235.861] (II) intel(0): Creating default Display subsection in Screen > section > "Default Screen Section" for depth/fbbpp 24/32 > [ 235.861] (==) intel(0): Depth 24, (--) framebuffer bpp 32 > [ 235.861] (==) intel(0): RGB weight 888 > [ 235.861] (==) intel(0): Default visual is TrueColor > [ 235.880] (II) intel(0): Output LVDS1 has no monitor section > [ 235.890] (--) intel(0): Found backlight control interface wscons (type > 'platform') for output LVDS1 > [ 235.890] (II) intel(0): Enabled output LVDS1 > [ 235.890] (II) intel(0): Output VGA1 has no monitor section > [ 235.890] (II) intel(0): Enabled output VGA1 > [ 235.890] (II) intel(0): Output DVI1 has no monitor section > [ 235.890] (II) intel(0): Enabled output DVI1 > [ 235.891] (II) intel(0): Output TV1 has no monitor section > [ 235.891] (II) intel(0): Enabled output TV1 > [ 235.891] (--) intel(0): Using a maximum size of 64x64 for hardware cursors > [ 235.891] (II) intel(0): Output VIRTUAL1 has no monitor section > [ 235.891] (II) intel(0): Enabled output VIRTUAL1 > [ 235.891] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1 > [ 235.891] (==) intel(0): TearFree disabled > [ 235.891] (==) intel(0): DPI set to (96, 96) > [ 235.891] (II) Loading sub module "dri2" > [ 235.891] (II) LoadModule: "dri2" > [ 235.891] (II) Module "dri2" already built-in > [ 235.891] (II) Loading sub module "present" > [ 235.891] (II) LoadModule: "present" > [ 235.891] (II) Module "present" already built-in > [ 235.891] (II) UnloadModule: "vesa" > [ 235.891] (II) Unloading vesa > [ 235.891] (==) Depth 24 pixmap format is 32 bpp > [ 235.948] (II) intel(0): SNA initialized with Alviso (gen3) backend > [ 235.948] (==) intel(0): Backing store enabled > [ 235.948] (==) intel(0): Silken mouse disabled > [ 235.952] (II) intel(0): HW Cursor enabled > [ 235.952] (II) intel(0): RandR 1.2 enabled, ignore the following RandR > disabled message. > [ 235.992] (==) intel(0): DPMS enabled > [ 235.993] (II) intel(0): [XvMC] i915_xvmc driver initialized. > [ 235.994] (II) intel(0): [DRI2] Setup complete > [ 235.994] (II) intel(0): [DRI2] DRI driver: i915 > [ 235.994] (II) intel(0): [DRI2] VDPAU driver: i915 > [ 235.994] (II) intel(0): direct rendering: DRI2 enabled > [ 235.994] (II) intel(0): hardware support for Present enabled > [ 235.994] (--) RandR disabled > [ 236.448] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer > [ 236.448] (II) AIGLX: enabled GLX_ARB_create_context > [ 236.448] (II) AIGLX: enabled GLX_ARB_create_context_profile > [ 236.448] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile > [ 236.448] (II) AIGLX: enabled GLX_INTEL_swap_event > [ 236.448] (II) AIGLX: enabled GLX_SGI_swap_control and > GLX_MESA_swap_control > [ 236.448] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB > [ 236.448] (II) AIGLX: enabled GLX_ARB_fbconfig_float > [ 236.448] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float > [ 236.448] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects > [ 236.449] (II) AIGLX: Loaded and initialized i915 > [ 236.449] (II) GLX: Initialized DRI2 GL provider for screen 0 > [ 236.474] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe > 1, position (0, 0), rotation normal, reflection none > [ 236.500] (II) intel(0): Setting screen physical size to 338 x 211 > [ 237.314] (II) config/wscons: checking input device /dev/wskbd > [ 237.314] (II) wskbd: using layout us > [ 237.314] (II) LoadModule: "kbd" > [ 237.330] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so > [ 237.341] (II) Module kbd: vendor="X.Org Foundation" > [ 237.341] compiled for 1.18.4, module version = 1.9.0 > [ 237.341] Module class: X.Org XInput Driver > [ 237.341] ABI class: X.Org XInput driver, version 22.1 > [ 237.341] (II) Using input driver 'kbd' for '/dev/wskbd' > [ 237.341] (**) /dev/wskbd: always reports core events > [ 237.341] (**) /dev/wskbd: always reports core events > [ 237.341] (**) Option "Protocol" "standard" > [ 237.341] (**) Option "XkbRules" "base" > [ 237.341] (**) Option "XkbModel" "pc105" > [ 237.341] (**) Option "XkbLayout" "us" > [ 237.341] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: > KEYBOARD, id 6) > [ 237.424] (II) config/wscons: checking input device /dev/wsmouse > [ 237.424] (II) LoadModule: "ws" > [ 237.426] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so > [ 237.440] (II) Module ws: vendor="X.Org Foundation" > [ 237.440] compiled for 1.18.4, module version = 1.3.0 > [ 237.440] Module class: X.Org XInput Driver > [ 237.440] ABI class: X.Org XInput driver, version 22.1 > [ 237.440] (II) Using input driver 'ws' for '/dev/wsmouse' > [ 237.440] (**) /dev/wsmouse: always reports core events > [ 237.440] (II) ws: /dev/wsmouse: debuglevel 0 > [ 237.440] (**) Option "Device" "/dev/wsmouse" > [ 237.440] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 > [ 237.440] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 > [ 237.440] (**) ws: /dev/wsmouse: associated screen: 0 > [ 237.440] (II) ws: /dev/wsmouse: minimum x position: 0 > [ 237.440] (II) ws: /dev/wsmouse: maximum x position: 1279 > [ 237.440] (II) ws: /dev/wsmouse: minimum y position: 0 > [ 237.440] (II) ws: /dev/wsmouse: maximum y position: 799 > [ 237.440] (==) ws: /dev/wsmouse: Buttons: 7 > [ 237.514] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 > [ 237.514] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: > MOUSE, id 7) > [ 237.514] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 > [ 237.514] (**) /dev/wsmouse: (accel) acceleration profile 0 > [ 237.514] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 > [ 237.514] (**) /dev/wsmouse: (accel) acceleration threshold: 4 > [ 238.551] (II) intel(0): EDID vendor "APP", prod id 40030 > [ 238.551] (II) intel(0): Printing DDC gathered Modelines: > [ 238.551] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 > 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) > [ 244.374] (II) AIGLX: Suspending AIGLX clients for VT switch > [ 257.555] (II) AIGLX: Resuming AIGLX clients after VT switch > [ 257.555] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe > 1, position (0, 0), rotation normal, reflection none > [ 257.752] (EE) > Fatal server error: > [ 257.752] (EE) can't switch keyboard to raw mode. Enable support for it in > the kernel > or use for example: > > Option "Protocol" "wskbd" > Option "Device" "/dev/wskbd0" > > in your xorg.conf(5) file > [ 257.752] (EE) > [ 257.752] (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 257.752] (EE) Please also check the log file at "/var/log/Xorg.0.log" for > additional information. > [ 257.752] (EE) > [ 257.752] (EE) ws: /dev/wsmouse: unknown command 4 > [ 257.752] (II) AIGLX: Suspending AIGLX clients for VT switch > [ 258.146] (EE) Server terminated with error (1). Closing log file. >
Hi Jan, i have the same problem since about half a year now. I wrote a bug report back in January, but the logs did not reveal anything useful and it didn't went too far. Due to lack of time, i haven't investigated since, but i can confirm that the bug is still present in the latest snapshot on my machine. Just for reference, here's the link to my bugreport: http://marc.info/?l=openbsd-bugs&m=148447759618744&w=2 There was another guy on reddit facing the same problem (on a Macbook 2,1): https://www.reddit.com/r/openbsd/comments/5xutzx/keyboard_unresponsive_after_suspend/ Nils
