On Thu, May 25, 2017 at 10:03:59AM -0700, [email protected] wrote:
| I'm wondering if there is a limit to the size of a disk for full disk
| encryption.
My biggest crypto disk is:
[weerd@pom] $ df -h /store
Filesystem Size Used Avail Capacity Mounted on
/dev/sd16a 5.4T 841G 4.3T 16% /store
[weerd@pom] $ dmesg | grep sd16
sd16 at scsibus12 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd16: 5723166MB, 512 bytes/sector, 11721044513 sectors
It is backed by this physical disk:
[weerd@pom] $ doas bioctl -vhi softraid0
Volume Status Size Device
softraid0 1 Online 5.5T sd16 CRYPTO
0 Online 5.5T 1:0.0 noencl <sd1a>
'unknown serial'
[weerd@pom] $ dmesg | grep -e '^sd1[ :]'
sd1 at scsibus1 targ 2 lun 0: <ATA, WDC WD60EFRX-68L, 82.0> SCSI3 0/direct
fixed naa.50014ee2b81f4111
sd1: 5723166MB, 512 bytes/sector, 11721045168 sectors
disklabels are as follows:
sd1:
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 11721045041 64 RAID
c: 11721045168 0 unused
sd16:
# size offset fstype [fsize bsize cpg]
a: 11721044288 64 4.2BSD 8192 65536 52270 # /store
c: 11721044513 0 unused
I did not create the -b special boot partition on either of these
volumes. Everything worked just fine without. The reduction in
sector count is due to rounding.
Cheers,
Paul 'WEiRD' de Weerd
| I'm trying to encrypt a 32Tb raid 6 drive on a lsi 9265-8i with 8 x 6Tb
| drives and it's failing with the error "unknown error". (very descriptive!)
|
| I was able to encrypt the 256Gb system disk without error during
| installation.
|
| Without encrypting the 32Tb drive, I had no problem creating the FS and
| mounting it.
|
| I know people will say this is a bad idea because of fsck (and maybe other
| reasons), but this drive will be mounted ro 99% of the time.
|
| Steps to recreate:
|
| dd if=/dev/random of=/dev/rsd0c bs=1m (took over a week)
|
| fdisk -iy -g sd0 (I left off the "-b 960" because this is not a bootable
| partiton)
|
| disklabel -E sd0
|
| Label editor (enter '?' for help at any prompt)
| > a a
| offset: [64]
| size: [70319603585]
| FS type: [4.2BSD] RAID
| > w
| > q
|
| # bioctl -v -c C -l sd0a softraid0
| New passphrase:
| Re-type passphrase:
| Deriving key using bcrypt PBKDF with 16 rounds...
| bioctl: unknown error
|
|
| dmesg:
|
| OpenBSD 6.1-current (GENERIC.MP) #54: Thu May 11 19:20:09 MDT 2017
| [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
| real mem = 34333851648 (32743MB)
| avail mem = 33287512064 (31745MB)
| mpath0 at root
| scsibus0 at mpath0: 256 targets
| mainbus0 at root
| bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9d000 (51 entries)
| bios0: vendor American Megatrends Inc. version "2.1" date 03/17/2012
| bios0: Supermicro X8DT3
| acpi0 at bios0: rev 2
| acpi0: sleep states S0 S1 S4 S5
| acpi0: tables DSDT FACP APIC MCFG SLIT SLIC OEMB SRAT HPET SSDT
| acpi0: wakeup devices NPE1(S4) NPE2(S4) NPE3(S4) NPE4(S4) NPE5(S4) NPE6(S4)
| NPE7(S4) NPE8(S4) NPE9(S4) NPEA(S4) P0P1(S4) PS2K(S4) USB0(S4) USB1(S4)
| USB2(S4) USB5(S4) [...]
| acpitimer0 at acpi0: 3579545 Hz, 24 bits
| acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
| cpu0 at mainbus0: apid 0 (boot processor)
| cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.32 MHz
| cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu0: 256KB 64b/line 8-way L2 cache
| cpu0: TSC frequency 2400324600 Hz
| cpu0: smt 0, core 0, package 0
| mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
| cpu0: apic clock running at 133MHz
| cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
| cpu1 at mainbus0: apid 2 (application processor)
| cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.00 MHz
| cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu1: 256KB 64b/line 8-way L2 cache
| cpu1: smt 0, core 1, package 0
| cpu2 at mainbus0: apid 18 (application processor)
| cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu2: 256KB 64b/line 8-way L2 cache
| cpu2: smt 0, core 9, package 0
| cpu3 at mainbus0: apid 20 (application processor)
| cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.00 MHz
| cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu3: 256KB 64b/line 8-way L2 cache
| cpu3: smt 0, core 10, package 0
| cpu4 at mainbus0: apid 32 (application processor)
| cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu4: 256KB 64b/line 8-way L2 cache
| cpu4: smt 0, core 0, package 1
| cpu5 at mainbus0: apid 48 (application processor)
| cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu5: 256KB 64b/line 8-way L2 cache
| cpu5: smt 0, core 8, package 1
| cpu6 at mainbus0: apid 50 (application processor)
| cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu6: 256KB 64b/line 8-way L2 cache
| cpu6: smt 0, core 9, package 1
| cpu7 at mainbus0: apid 52 (application processor)
| cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.00 MHz
| cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu7: 256KB 64b/line 8-way L2 cache
| cpu7: smt 0, core 10, package 1
| cpu8 at mainbus0: apid 1 (application processor)
| cpu8: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu8:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu8: 256KB 64b/line 8-way L2 cache
| cpu8: smt 1, core 0, package 0
| cpu9 at mainbus0: apid 3 (application processor)
| cpu9: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.00 MHz
| cpu9:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu9: 256KB 64b/line 8-way L2 cache
| cpu9: smt 1, core 1, package 0
| cpu10 at mainbus0: apid 19 (application processor)
| cpu10: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu10:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu10: 256KB 64b/line 8-way L2 cache
| cpu10: smt 1, core 9, package 0
| cpu11 at mainbus0: apid 21 (application processor)
| cpu11: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.00 MHz
| cpu11:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu11: 256KB 64b/line 8-way L2 cache
| cpu11: smt 1, core 10, package 0
| cpu12 at mainbus0: apid 33 (application processor)
| cpu12: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu12:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu12: 256KB 64b/line 8-way L2 cache
| cpu12: smt 1, core 0, package 1
| cpu13 at mainbus0: apid 49 (application processor)
| cpu13: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.00 MHz
| cpu13:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu13: 256KB 64b/line 8-way L2 cache
| cpu13: smt 1, core 8, package 1
| cpu14 at mainbus0: apid 51 (application processor)
| cpu14: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu14:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu14: 256KB 64b/line 8-way L2 cache
| cpu14: smt 1, core 9, package 1
| cpu15 at mainbus0: apid 53 (application processor)
| cpu15: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.01 MHz
| cpu15:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
| cpu15: 256KB 64b/line 8-way L2 cache
| cpu15: smt 1, core 10, package 1
| ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 20, 24 pins
| ioapic1 at mainbus0: apid 7 pa 0xfec8a000, version 20, 24 pins
| acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
| acpihpet0 at acpi0: 14318179 Hz
| acpiprt0 at acpi0: bus 0 (PCI0)
| acpiprt1 at acpi0: bus 5 (NPE1)
| acpiprt2 at acpi0: bus 4 (NPE3)
| acpiprt3 at acpi0: bus 3 (NPE5)
| acpiprt4 at acpi0: bus 2 (NPE7)
| acpiprt5 at acpi0: bus -1 (NPE9)
| acpiprt6 at acpi0: bus 1 (P0P1)
| acpiprt7 at acpi0: bus -1 (P0P4)
| acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu4 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu5 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu6 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu7 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu8 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu9 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu10 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu11 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu12 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu13 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu14 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| acpicpu15 at acpi0: C3(350@245 mwait.3@0x20), C3(750@205 mwait.3@0x10),
| C1(1000@3 halt), PSS
| "PNP0501" at acpi0 not configured
| "PNP0501" at acpi0 not configured
| "PNP0501" at acpi0 not configured
| "PNP0303" at acpi0 not configured
| acpibtn0 at acpi0: PWRB
| ipmi at mainbus0 not configured
| cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2401, 2400, 2267, 2133, 2000,
| 1867, 1733, 1600 MHz
| pci0 at mainbus0 bus 0
| pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x22
| ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x22: msi
| pci1 at ppb0 bus 5
| em0 at pci1 dev 0 function 0 "Intel 82576" rev 0x01: msi, address
| 00:25:90:2c:82:e2
| em1 at pci1 dev 0 function 1 "Intel 82576" rev 0x01: msi, address
| 00:25:90:2c:82:e3
| ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x22: msi
| pci2 at ppb1 bus 4
| ppb2 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x22: msi
| pci3 at ppb2 bus 3
| mfii0 at pci3 dev 0 function 0 "Symbios Logic MegaRAID SAS2208" rev 0x01:
| msi
| mfii0: "LSI MegaRAID SAS 9265-8i", firmware 23.34.0-0019, 1024MB cache
| scsibus1 at mfii0: 64 targets
| sd0 at scsibus1 targ 0 lun 0: <LSI, MR9265-8i, 3.46> SCSI3 0/direct fixed
| naa.600605b0059bc720209ae7c126362997
| sd0: 34335744MB, 512 bytes/sector, 70319603712 sectors
| scsibus2 at mfii0: 256 targets
| ppb3 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x22: msi
| pci4 at ppb3 bus 2
| pchb1 at pci0 dev 13 function 0 vendor "Intel", unknown product 0x343a rev
| 0x22
| pchb2 at pci0 dev 13 function 1 vendor "Intel", unknown product 0x343b rev
| 0x22
| pchb3 at pci0 dev 13 function 2 vendor "Intel", unknown product 0x343c rev
| 0x22
| pchb4 at pci0 dev 13 function 3 vendor "Intel", unknown product 0x343d rev
| 0x22
| pchb5 at pci0 dev 13 function 4 "Intel 5520/X58 QuickPath" rev 0x22
| pchb6 at pci0 dev 13 function 5 "Intel 5520 QuickPath" rev 0x22
| pchb7 at pci0 dev 13 function 6 vendor "Intel", unknown product 0x341a rev
| 0x22
| pchb8 at pci0 dev 14 function 0 vendor "Intel", unknown product 0x341c rev
| 0x22
| pchb9 at pci0 dev 14 function 1 vendor "Intel", unknown product 0x341d rev
| 0x22
| pchb10 at pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev
| 0x22
| pchb11 at pci0 dev 14 function 4 vendor "Intel", unknown product 0x3439 rev
| 0x22
| "Intel X58 IOxAPIC" rev 0x22 at pci0 dev 19 function 0 not configured
| "Intel X58 Misc" rev 0x22 at pci0 dev 20 function 0 not configured
| "Intel X58 GPIO" rev 0x22 at pci0 dev 20 function 1 not configured
| "Intel X58 RAS" rev 0x22 at pci0 dev 20 function 2 not configured
| "Intel X58 Throttle" rev 0x22 at pci0 dev 20 function 3 not configured
| "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 0 not configured
| "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 1 not configured
| "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 2 not configured
| "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 3 not configured
| "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 4 not configured
| "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 5 not configured
| "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 6 not configured
| "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 7 not configured
| uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 6 int 16
| uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 6 int 21
| uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 6 int 19
| ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 6 int 18
| usb0 at ehci0: USB revision 2.0
| uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
| 2.00/1.00 addr 1
| uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 6 int 23
| uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 6 int 19
| uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 6 int 18
| ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 6 int 23
| usb1 at ehci1: USB revision 2.0
| uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
| 2.00/1.00 addr 1
| ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
| pci5 at ppb4 bus 1
| vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
| wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
| wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
| pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
| ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: msi, AHCI 1.2
| ahci0: port 0: 3.0Gb/s
| ahci0: port 1: 1.5Gb/s
| scsibus3 at ahci0: 32 targets
| sd1 at scsibus3 targ 0 lun 0: <ATA, ASMT109x- RAID1, EXM0> SCSI3 0/direct
| fixed naa.5002538d704e960d
| sd1: 244192MB, 512 bytes/sector, 500105216 sectors, thin
| cd0 at scsibus3 targ 1 lun 0: <ATAPI, iHAS124 B, AL08> ATAPI 5/cdrom
| removable
| ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 6 int
| 18
| iic0 at ichiic0
| sdtemp0 at iic0 addr 0x1a: at30ts00
| iic0: addr 0x2e 00=40 words 00=4040 01=0000 02=0000 03=0000 04=0000 05=0000
| 06=0000 07=0000
| nvt0 at iic0 addr 0x2f: W83795ADG
| spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
| spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
| usb2 at uhci0: USB revision 1.0
| uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
| 1.00/1.00 addr 1
| usb3 at uhci1: USB revision 1.0
| uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
| 1.00/1.00 addr 1
| usb4 at uhci2: USB revision 1.0
| uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
| 1.00/1.00 addr 1
| usb5 at uhci3: USB revision 1.0
| uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
| 1.00/1.00 addr 1
| usb6 at uhci4: USB revision 1.0
| uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
| 1.00/1.00 addr 1
| usb7 at uhci5: USB revision 1.0
| uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev
| 1.00/1.00 addr 1
| isa0 at pcib0
| isadma0 at isa0
| com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
| com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
| com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
| pckbc0 at isa0 port 0x60/5 irq 1 irq 12
| pckbd0 at pckbc0 (kbd slot)
| wskbd0 at pckbd0: console keyboard, using wsdisplay0
| pcppi0 at isa0 port 0x61
| spkr0 at pcppi0
| wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
| vmm0 at mainbus0: VMX/EPT
| uhidev0 at uhub4 port 2 configuration 1 interface 0 "American Megatrends
| Inc. Virtual Keyboard and Mouse" rev 1.10/1.00 addr 2
| uhidev0: iclass 3/1
| ukbd0 at uhidev0: 8 variable keys, 6 key codes
| wskbd1 at ukbd0 mux 1
| wskbd1: connecting to wsdisplay0
| uhidev1 at uhub4 port 2 configuration 1 interface 1 "American Megatrends
| Inc. Virtual Keyboard and Mouse" rev 1.10/1.00 addr 2
| uhidev1: iclass 3/1
| ums0 at uhidev1: 3 buttons
| wsmouse0 at ums0 mux 0
| uhidev2 at uhub5 port 1 configuration 1 interface 0 "Microsoft Microsoft
| 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 2
| uhidev2: iclass 3/1
| ums1 at uhidev2: 3 buttons, Z dir
| wsmouse1 at ums1 mux 0
| vscsi0 at root
| scsibus4 at vscsi0: 256 targets
| softraid0 at root
| scsibus5 at softraid0: 256 targets
| sd2 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
| sd2: 244190MB, 512 bytes/sector, 500102858 sectors
| softraid0: volume sd2 is roaming, it used to be sd3, updating metadata
| root on sd2a (868aee251608ed34.a) swap on sd2b dump on sd2b
| em0: watchdog: head 3 tail 2 TDH 3 TDT 3
| softraid0: invalid metadata format
|
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
