hey jens, from what i can tell, you talk to the ami mg9071 chips on that enclosure using sgpio, not in band using smp (sas mgmt protocol) or ses as a scsi device.
i get the impression that mpii hardware does have some understanding of enclosures connected via sgpio, but i'm not sure what benefit it would provide. it may affect addressing on the bus, but im not sure you'd get temperatures or fan speeds or anything off it. cheers, dlg > On 9 Jun 2017, at 02:05, Jens A. Griepentrog <m-griepent...@t-online.de> > wrote: > > Dear Listeners, > > Let me know, please, if enclosure monitoring > is supported for disks attached to Supermicro > M28SAB drive cages (with two AMI MG9071 chips) > or similar backplanes. Drives work fine when > attached to some LSI 2008 controller but there > appear no "ses* at scsibus?" boot messages > (see below, disks attached to the drive cage > are sd4 ... sd11), jumper settings on the cage: > JP61 2-3: Fan disabled (there is no fan) > JP62 1-2: Enclosure monitor enabled > > With best regards, > Jens > > > > OpenBSD 6.1 (GENERIC.MP) #6: Mon May 22 20:34:30 CEST 2017 > rob...@syspatch-61-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17154113536 (16359MB) > avail mem = 16629547008 (15859MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf06f0 (62 entries) > bios0: vendor American Megatrends Inc. version "0705" date 06/29/2010 > bios0: ASUSTeK Computer INC. P7F-M WS > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT > acpi0: wakeup devices BR1E(S4) UAR1(S4) PS2K(S4) EUSB(S4) USB0(S4) USB1(S4) > USB2(S4) USB3(S4) USBE(S4) USB4(S4) USB5(S4) USB6(S4) BR21(S4) BR22(S4) > BR23(S4) P0P1(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1867.00 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 1867000680 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 133MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.73 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.73 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.73 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 7 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 7 (BR1E) > acpiprt2 at acpi0: bus -1 (BR21) > acpiprt3 at acpi0: bus -1 (BR22) > acpiprt4 at acpi0: bus -1 (BR23) > acpiprt5 at acpi0: bus -1 (P0P1) > acpiprt6 at acpi0: bus 1 (P0P3) > acpiprt7 at acpi0: bus -1 (P0P4) > acpiprt8 at acpi0: bus -1 (P0P5) > acpiprt9 at acpi0: bus -1 (P0P6) > acpiprt10 at acpi0: bus 2 (BR20) > acpiprt11 at acpi0: bus 5 (BR26) > acpiprt12 at acpi0: bus 6 (BR27) > acpicpu0 at acpi0: !C3(350@17 mwait.1@0x20), !C3(500@17 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: !C3(350@17 mwait.1@0x20), !C3(500@17 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: !C3(350@17 mwait.1@0x20), !C3(500@17 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: !C3(350@17 mwait.1@0x20), !C3(500@17 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > "PNP0501" at acpi0 not configured > "PNP0303" at acpi0 not configured > acpibtn0 at acpi0: PWRB > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 1867 MHz: speeds: 1868, 1867, 1733, 1600, 1467, > 1333, 1200 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11 > ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: msi > pci1 at ppb0 bus 1 > mpii0 at pci1 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi > mpii0: SAS9210-8i, firmware 16.0.0.0, MPI 2.0 > scsibus1 at mpii0: 256 targets > "Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured > "Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured > "Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured > "Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured > "Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured > "Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 7 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi > azalia0: codecs: Realtek ALC888 > audio0 at azalia0 > ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x05 > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 6 "Intel 3400 PCIE" rev 0x05 > pci5 at ppb4 bus 5 > em0 at pci5 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > bc:ae:c5:05:5b:71 > ppb5 at pci0 dev 28 function 7 "Intel 3400 PCIE" rev 0x05 > pci6 at ppb5 bus 6 > em1 at pci6 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > bc:ae:c5:05:5b:b1 > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 7 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5 > pci7 at ppb6 bus 7 > vga1 at pci7 dev 2 function 0 "3DFX Voodoo3" rev 0x01 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3 > ahci0: port 0: 3.0Gb/s > ahci0: port 1: 3.0Gb/s > ahci0: port 2: 3.0Gb/s > ahci0: port 3: 3.0Gb/s > ahci0: port 4: 1.5Gb/s > ahci0: port 5: 1.5Gb/s > scsibus2 at ahci0: 32 targets > sd0 at scsibus2 targ 0 lun 0: <ATA, SSDSA2SH064G1GC, 045C> SCSI3 0/direct > fixed naa.5001517959470944 > sd0: 61057MB, 512 bytes/sector, 125045424 sectors > sd1 at scsibus2 targ 1 lun 0: <ATA, SSDSA2SH032G1GN, 045C> SCSI3 0/direct > fixed naa.50015179594773ba > sd1: 30517MB, 512 bytes/sector, 62500000 sectors > sd2 at scsibus2 targ 2 lun 0: <ATA, INTEL SSDSA2VP02, 2CV1> SCSI3 0/direct > fixed naa.50015179595d23dc > sd2: 19087MB, 512 bytes/sector, 39091248 sectors, thin > sd3 at scsibus2 targ 3 lun 0: <ATA, INTEL SSDSA2VP02, 2CV1> SCSI3 0/direct > fixed naa.50015179595d23a4 > sd3: 19087MB, 512 bytes/sector, 39091248 sectors, thin > cd0 at scsibus2 targ 4 lun 0: <Optiarc, DVD RW AD-7260S, 1.00> ATAPI 5/cdrom > removable > cd1 at scsibus2 targ 5 lun 0: <MATSHITA, LKM-KB23, A232> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 7 int 18 > iic0 at ichiic0 > sdtemp0 at iic0 addr 0x18: stts424e02 > sdtemp1 at iic0 addr 0x19: stts2002 > sdtemp2 at iic0 addr 0x1a: stts424e02 > sdtemp3 at iic0 addr 0x1b: stts2002 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM registered ECC PC3-10600 with > thermal sensor > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM registered ECC PC3-10600 with > thermal sensor > spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM registered ECC PC3-10600 with > thermal sensor > spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM registered ECC PC3-10600 with > thermal sensor > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lm0 at isa0 port 0x290/8: W83627DHG > vmm0 at mainbus0: VMX/EPT > sd4 at scsibus1 targ 0 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct > fixed naa.5000cca01305d3a8 > sd4: 381554MB, 512 bytes/sector, 781422768 sectors > sd5 at scsibus1 targ 1 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct > fixed naa.5000cca0130bac48 > sd5: 381554MB, 512 bytes/sector, 781422768 sectors > sd6 at scsibus1 targ 2 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct > fixed naa.5000cca013040ab4 > sd6: 381554MB, 512 bytes/sector, 781422768 sectors > sd7 at scsibus1 targ 3 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct > fixed naa.5000cca01303eb10 > sd7: 381554MB, 512 bytes/sector, 781422768 sectors > sd8 at scsibus1 targ 4 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct > fixed naa.5000cca01303ea78 > sd8: 381554MB, 512 bytes/sector, 781422768 sectors > sd9 at scsibus1 targ 5 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct > fixed naa.5000cca0130c9e48 > sd9: 381554MB, 512 bytes/sector, 781422768 sectors > sd10 at scsibus1 targ 6 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct > fixed naa.5000cca01306b400 > sd10: 381554MB, 512 bytes/sector, 781422768 sectors > sd11 at scsibus1 targ 7 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct > fixed naa.5000cca013044b28 > sd11: 381554MB, 512 bytes/sector, 781422768 sectors > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech Optical USB > Mouse" rev 2.00/3.40 addr 3 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > umass0 at uhub3 port 4 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 4 > umass0: using SCSI over Bulk-Only > scsibus3 at umass0: 2 targets, initiator 0 > sd12 at scsibus3 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd13 at scsibus3 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd14 at scsibus3 targ 1 lun 2: <Generic-, SM/xD-Picture, 1.02> SCSI0 0/direct > removable > sd15 at scsibus3 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhidev1 at uhub3 port 4 configuration 1 interface 1 "Generic Mass Storage > Device" rev 2.00/1.00 addr 4 > uhidev1: iclass 3/0, 4 report ids > uhid0 at uhidev1 reportid 4: input=7, output=0, feature=0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on sd0a (78faa8282eb6f8fa.a) swap on sd0b dump on sd0b > > > > >
