I got openbsd 6.1 amd64 working with qemu try that On July 25, 2017 9:30:08 PM GMT+02:00, Mxher <[email protected]> wrote: >Hello, > >I'm renting a dedicated server from a web host that unfortunately does >not propose OpenBSD installation. > >So I'm installing OpenBSD using qemu from my host rescue mode (which >use >FreeBSD). > > >Usually it works like a charm but this time, on this server/hardware, >it >does not work: OpenBSD does not seem to start at all. >Indeed when I boot with qemu I do not see any logs of the "normal" boot >of the server (I only see qemu's boots in the logs). > > >Unfortunately my host can't offer me a KVM because the server does not >have any video output. > > >Do you have any tip I could use to debug this ? >I'm used to this kind of installation but I'm lost on this one, I don't >even know where to look and how to be able to debug without any boot >and >no vision on what is going on at boot time. > > >(I tried with both bsd and bsp.mp kernels.) > > >Any clue would be really appreciated! > >Thank you! > > > >PS: here is the dmesg output from FreeBSD: >Copyright (c) 1992-2016 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016 > [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 >FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on >LLVM 3.8.0) >VT(vga): resolution 640x480 >CPU: Intel(R) Atom(TM) CPU C2338 @ 1.74GHz (1750.04-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x406d8 Family=0x6 Model=0x4d Stepping=8 > >Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > >Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> > AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=0x101<LAHF,Prefetch> > Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID > TSC: P-state invariant, performance statistics >real memory = 6442450944 (6144 MB) >avail memory = 3926736896 (3744 MB) >Event timer "LAPIC" quality 600 >ACPI APIC Table: <CORE COREBOOT> >WARNING: L1 data cache covers less APIC IDs than a core >0 < 1 >FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >FreeBSD/SMP: 1 package(s) x 2 core(s) >ioapic0 <Version 2.0> irqs 0-23 on motherboard >random: entropy device external interface >kbd0 at kbdmux0 >netmap: loaded module >module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19 >random: registering fast source Intel Secure Key RNG >random: fast provider: "Intel Secure Key RNG" >vtvga0: <VT VGA driver> on motherboard >cryptosoft0: <software crypto> on motherboard >acpi0: <CORE COREBOOT> on motherboard >acpi0: Power Button (fixed) >hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on >acpi0 >hpet0: invalid period >device_attach: hpet0 attach returned 6 >cpu0: <ACPI CPU> on acpi0 >cpu1: <ACPI CPU> on acpi0 >hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on >acpi0 >hpet0: invalid period >device_attach: hpet0 attach returned 6 >atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 >Event timer "RTC" frequency 32768 Hz quality 0 >attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >Timecounter "i8254" frequency 1193182 Hz quality 0 >Event timer "i8254" frequency 1193182 Hz quality 100 >Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pcib1: <ACPI PCI-PCI bridge> mem 0xdff00000-0xdff1ffff irq 16 at device >1.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port >0x1000-0x101f mem 0xdfe00000-0xdfe7ffff,0xdfe80000-0xdfe83fff irq 16 at >device 0.0 on pci1 >igb0: Using MSIX interrupts with 3 vectors >igb0: Ethernet address: 00:08:a2:0c:1e:5a >igb0: Bound queue 0 to cpu 0 >igb0: Bound queue 1 to cpu 1 >igb0: netmap queues/slots: TX 2/1024, RX 2/1024 >pcib2: <ACPI PCI-PCI bridge> mem 0xdff20000-0xdff3ffff irq 19 at device >2.0 on pci0 >pci2: <ACPI PCI bus> on pcib2 >pcib3: <ACPI PCI-PCI bridge> mem 0xdff40000-0xdff5ffff irq 20 at device >3.0 on pci0 >pci3: <ACPI PCI bus> on pcib3 >pcib4: <ACPI PCI-PCI bridge> mem 0xdff60000-0xdff7ffff irq 23 at device >4.0 on pci0 >pci4: <ACPI PCI bus> on pcib4 >pci0: <base peripheral, IOMMU> at device 15.0 (no driver attached) >ehci0: <Intel Avoton USB 2.0 controller> mem 0xdff81400-0xdff817ff irq >22 at device 22.0 on pci0 >usbus0: EHCI version 1.0 >usbus0 on ehci0 >ahci0: <Intel Avoton AHCI SATA controller> port >0x2040-0x2047,0x2060-0x2063,0x2048-0x204f,0x2064-0x2067,0x2000-0x201f >mem 0xdff80000-0xdff807ff irq 23 at device 23.0 on pci0 >ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported >ahcich0: <AHCI channel> at channel 0 on ahci0 >ahcich1: <AHCI channel> at channel 1 on ahci0 >ahcich2: <AHCI channel> at channel 2 on ahci0 >ahcich3: <AHCI channel> at channel 3 on ahci0 >ahci1: <Intel Avoton AHCI SATA controller> port >0x2050-0x2057,0x2068-0x206b,0x2058-0x205f,0x206c-0x206f,0x2020-0x203f >mem 0xdff80800-0xdff80fff irq 16 at device 24.0 on pci0 >ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported >ahcich4: <AHCI channel> at channel 0 on ahci1 >ahcich5: <AHCI channel> at channel 1 on ahci1 >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >orm0: <ISA Option ROM> at iomem 0xc0000-0xc0fff on isa0 >ppc0: cannot reserve I/O port range >uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 >uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 >uart1: console (9600,n,8,1) >est0: <Enhanced SpeedStep Frequency Control> on cpu0 >est1: <Enhanced SpeedStep Frequency Control> on cpu1 >Timecounters tick every 1.000 msec >nvme cam probe device init >md0: Preloaded image </mfsroot> 74260480 bytes at 0xffffffff821a7c38 >usbus0: 480Mbps High Speed USB v2.0 >ugen0.1: <Intel> at usbus0 >uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on >usbus0 >ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 >ada0: <HGST HTS721010A9E630 JB0OA3W0> ATA8-ACS SATA 3.x device >ada0: Serial Number JR1000D32ESZBE >ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) >ada0: Command Queueing enabled >ada0: 953869MB (1953525168 512 byte sectors) >SMP: AP CPU #1 Launched! >Timecounter "TSC" frequency 1750043568 Hz quality 1000 >Trying to mount root from ufs:/dev/md0 []... >uhub0: 8 ports with 8 removable, self powered >ugen0.2: <vendor 0x8087> at usbus0 >uhub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> >on usbus0 >uhub1: 4 ports with 4 removable, self powered >random: unblocking device. >igb0: link state changed to UP
-- Take Care Sincerely flipchan layerprox dev
