No Idea - I've been using tlsdate ( https://github.com/ioerror/tlsdate ) inside my Cloud VM images recently to set initial time as a lot of the time ntp traffic is firewalled. Whereas there is generally a https source you can reach from inside locked down networks.
On 15 September 2017 at 03:46, Rui Ribeiro <[email protected]> wrote: > Hi, > > Does NTPDd supports "tinker panic 0" as the linux one? > > On 14 September 2017 at 12:46, Joel Wirāmu Pauling <[email protected]> > wrote: > >> Run NTPd on the hypervisor and NTP client In VM. Run ntpdate at boot >> before >> starting NTPd on the client to ensure the stepping is not too far off >> first. >> >> On 14 Sep. 2017 11:35 pm, "Aaron Marcher" <[email protected]> wrote: >> >> Hi all, >> >> I have a weird problem on my OpenBSD server. It is a virtualized guest >> under QEMU-KVM. Apperently time management is completely off. With HPET >> and >> normal HW-clock the command "time sleep 1" shows a little bit more than a >> second after a fresh boot. After a few hours the result is about 10 >> seconds. Additionally the clock drifts slowly. The problem is on OpenBSD >> 6.1 with all syspatches applied. >> Does anybody know how to fix the problem? >> Thank you very much in advance! >> >> Regards, >> Aaron Marcher >> >> -- >> Web: https://drkhsh.at/ or http://drkhsh5rv6pnahas.onion/ >> Gopher: gopher://drkhsh.at or gopher://drkhsh5rv6pnahas.onion >> GPG: 0x09e71697435bf54b >> Fingerprint: 57D2 5F2C 9402 A6BD FEF9 B3B6 09E7 1697 435B F54B >> > > > > -- > Regards, > > -- > Rui Ribeiro > Senior Linux Architect and Network Administrator > ISCTE-IUL > https://www.linkedin.com/pub/rui-ribeiro/16/ab8/434 >
