With the help of Maurice I got it working following the instructions
here[1]. With the advice from [2] and [3] the solution is to disable secure
boot (have not tried with it enabled yet), enable CSM support and in
OpenBSD (assuming sd0 is the correct disk):
mkdir /mnt/efi
mount /dev/sd0i /mnt/efi
mkdir /mnt/efi/OpenBSD
cp /usr/mdec/BOOTX64.EFI /mnt/efi/OpenBSD
In Windows 10:
bcdedit /copy {bootmgr} /d "OpenBSD"
bcdedit /set {your guid} path \EFI\OpenBSD\BOOTX64.EFI
bcdedit /set {fwbootmgr} displayorder {your guid} /addfirst
Regards,
Martin Oppegaard
[1] https://github.com/hakuna-m/wubiuefi/issues/15#issuecomment-286151371
[2] https://jcs.org/2017/09/01/thinkpad_x1c
[3] https://blog.jasper.la/openbsd-uefi-bootloader-howto/
On Sun, Nov 12, 2017 at 9:43 AM, Martin Oppegaard <
[email protected]> wrote:
> Hi misc,
>
> I've just shrinked the Windows partition on my X1 Carbon and installed
> OpenBSD 6.2 with full disk encryption. After copying the PBR Windows is not
> able to boot with it, returning error 0x000007b: file is missing or corrupt.
>
> I've tried with "PBR"s from several partitions, including sd2a where sd2
> is the encrypted disk.
>
> I can boot into OpenBSD with the installation media's bootloader however.
> Attached is dmesg, fdisk and disklabel outputs. Does anyone have any
> suggestions?
>
> Regards,
> Martin Oppegaard
>
> OpenBSD 6.2 (GENERIC.MP) #134: Tue Oct 3 21:22:29 MDT 2017
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8304758784 <(830)%20475-8784> (7920MB)
> avail mem = 8046047232 <(804)%20604-7232> (7673MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xcf079000 (65 entries)
> bios0: vendor LENOVO version "N1FET57W (1.31 )" date 09/29/2017
> bios0: LENOVO 20FBCTO1WW
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA SSDT SSDT TPM2 UEFI SSDT SSDT ECDT HPET APIC
> MCFG SSDT SSDT DBGP DBG2 BOOT BATB SSDT SSDT MSDM ASF! FPDT UEFI
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP9(S4) XHCI(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpihpet0 at acpi0: 23999999 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2400.00 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,
> FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,
> DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,
> LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,
> SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: TSC frequency 2400000000 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 23MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2400.00 MHz
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,
> FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,
> DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,
> LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,
> SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 1 (application processor)
> cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2400.00 MHz
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,
> FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,
> DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,
> LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,
> SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 1, core 0, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2400.00 MHz
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,
> FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,
> DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,
> LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,
> SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus 2 (EXP1)
> acpiprt5 at acpi0: bus 4 (EXP3)
> acpiprt6 at acpi0: bus -1 (EXP5)
> acpiprt7 at acpi0: bus -1 (EXP9)
> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for XHCI
> acpipwrres1 at acpi0: PG00, resource for PEG0
> acpipwrres2 at acpi0: PG01, resource for PEG1
> acpipwrres3 at acpi0: PG02, resource for PEG2
> acpipwrres4 at acpi0: WRST
> acpipwrres5 at acpi0: WRST
> acpitz0 at acpi0: critical temperature is 128 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> "LEN0071" at acpi0 not configured
> "LEN0058" at acpi0 not configured
> "INT3F0D" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "00HW028" serial 3235 type LiP oem "LGC"
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> "PNP0C60" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT0E0C" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "MSFT0101" at acpi0 not configured
> "INT3394" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout at acpivideo0 not configured
> cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2301, 2300, 2200, 2100, 2000,
> 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
> drm0 at inteldrm0
> inteldrm0: msi
> error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load
> firmware i915/skl_dmc_ver1.bin (-22)
> error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error
> -8 (ignored)
> inteldrm0: 2560x1440, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
> "Intel 100 Series ISH" rev 0x21 at pci0 dev 19 function 0 not configured
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
> AHCI 1.3.1
> ahci0: port 1: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 1 lun 0: <ATA, INTEL SSDSCKJF18, LUDi> SCSI3 0/direct
> fixed naa.55cd2e414cb79dbd
> sd0: 171705MB, 512 bytes/sector, 351651888 sectors, thin
> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci1 at ppb0 bus 2
> rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
> sdmmc0 at rtsx0: 4-bit
> ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
> pci2 at ppb1 bus 4
> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x3a,
> msi
> pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
> azalia0: codecs: Conexant/0x5111, Intel/0x2809, using Conexant/0x5111
> audio0 at azalia0
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic
> 2 int 16
> iic0 at ichiic0
> em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi, address
> 54:ee:75:aa:45:28
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.2, 0x1e2b1 0x940300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> efifb at mainbus0 not configured
> ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 2
> uvideo0 at uhub0 port 8 configuration 1 interface 0 "Azurewave Integrated
> Camera" rev 2.00/0.20 addr 3
> video0 at uvideo0
> ugen1 at uhub0 port 9 "Validity Sensors product 0x0090" rev 2.00/1.64 addr
> 4
> umass0 at uhub0 port 15 configuration 1 interface 0 "Kingston DataTraveler
> 3.0" rev 3.00/1.10 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 3.0, PMAP> SCSI4
> 0/direct removable serial.09511666BFC109251357
> sd1: 14784MB, 512 bytes/sector, 30277632 sectors
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct
> fixed
> sd2: 106785MB, 512 bytes/sector, 218697200 sectors
> root on sd2a (28089724489b98d6.a) swap on sd2b dump on sd2b
> iwm0: hw rev 0x200, fw ver 16.242414.0, address e4:a7:a0:19:df:bb
> umass1 at uhub0 port 1 configuration 1 interface 0 "Corsair Voyager Mini"
> rev 2.00/11.00 addr 6
> umass1: using SCSI over Bulk-Only
> scsibus5 at umass1: 2 targets, initiator 0
> sd3 at scsibus5 targ 1 lun 0: <Corsair, Voyager Mini, 1100> SCSI2 0/direct
> removable serial.1b1c0b290000000019FA
> sd3: 7667MB, 512 bytes/sector, 15702912 sectors
> sd3 detached
> scsibus5 detached
> umass1 detached
> ugen0 detached
> video0 detached
> uvideo0 detached
> ugen1 detached
> sd1 detached
> scsibus2 detached
> umass0 detached
> uhub0 detached
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> error: [drm:pid721:i915_gem_init_hw] *ERROR* Failed to initialize GuC,
> error -8 (ignored)
> ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 2
> uvideo0 at uhub0 port 8 configuration 1 interface 0 "Azurewave Integrated
> Camera" rev 2.00/0.20 addr 3
> video0 at uvideo0
> ugen1 at uhub0 port 9 "Validity Sensors product 0x0090" rev 2.00/1.64 addr
> 4
> umass0 at uhub0 port 15 configuration 1 interface 0 "Kingston DataTraveler
> 3.0" rev 3.00/1.10 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 3.0, PMAP> SCSI4
> 0/direct removable serial.09511666BFC109251357
> sd1: 14784MB, 512 bytes/sector, 30277632 sectors
> umass1 at uhub0 port 1 configuration 1 interface 0 "Corsair Voyager Mini"
> rev 2.00/11.00 addr 6
> umass1: using SCSI over Bulk-Only
> scsibus5 at umass1: 2 targets, initiator 0
> sd3 at scsibus5 targ 1 lun 0: <Corsair, Voyager Mini, 1100> SCSI2 0/direct
> removable serial.1b1c0b290000000019FA
> sd3: 7667MB, 512 bytes/sector, 15702912 sectors
>
>
> Disk: sd0 Usable LBA: 34 to 351651854 [351651888 Sectors]
> #: type [ start: size ]
> ------------------------------------------------------------------------
> 0: EFI Sys [ 2048: 532480 ]
> 1: e3c9e316-0b5c-4db8-817d-f92df00215ae [ 534528: 32768 ]
> 2: FAT12 [ 567296: 130338816 ]
> 3: OpenBSD [ 130906112: 218697728 ]
> 4: Win Recovery [ 349603840: 2048000 ]
>
>
> # /dev/rsd0c:
> type: SCSI
> disk: SCSI disk
> label: INTEL SSDSCKJF18
> duid: e5d58bd8ccd09481
> flags:
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 255
> sectors/cylinder: 16065
> cylinders: 21889
> total sectors: 351651888
> boundstart: 130906112
> boundend: 349603840
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> a: 218697728 130906112 RAID
> c: 351651888 0 unused
> i: 532480 2048 MSDOS
> j: 32768 534528 unknown
> k: 130338816 567296 MSDOS
> l: 2048000 349603840 unknown
>
>
> # /dev/rsd2c:
> type: SCSI
> disk: SCSI disk
> label: SR CRYPTO
> duid: 28089724489b98d6
> flags:
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 255
> sectors/cylinder: 16065
> cylinders: 13613
> total sectors: 218697200
> boundstart: 1024
> boundend: 218697137
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> a: 2097152 1024 4.2BSD 2048 16384 12958 # /
> b: 16744520 2098176 swap # none
> c: 218697200 0 unused
> d: 8388576 18842720 4.2BSD 2048 16384 12958 # /tmp
> e: 26421248 27231296 4.2BSD 2048 16384 12958 # /var
> f: 4194304 53652544 4.2BSD 2048 16384 12958 # /usr
> g: 2097152 57846848 4.2BSD 2048 16384 12958 #
> /usr/X11R6
> h: 20971520 59944000 4.2BSD 2048 16384 12958 #
> /usr/local
> i: 960 64 MSDOS
> j: 4194304 80915520 4.2BSD 2048 16384 12958 #
> /usr/src
> k: 12582912 85109824 4.2BSD 2048 16384 12958 #
> /usr/obj
> l: 121004352 97692736 4.2BSD 2048 16384 12958 # /home
>
>
