Hi,
I have a new Lanner FW-7526B firewall loaded with OpenBSD 6.2. I must say it's
a nice small firewall but unfortunately the ntp daemon does not seem to manage
to set the time correctly with this hardware. The time is off by approximately
1:20h and every 2-3 minutes I see the following log entries:
Dec 9 14:26:10 fw ntpd[828]: adjusting local clock by -85381.687984s
Dec 9 14:29:53 fw ntpd[828]: adjusting local clock by -85380.584607s
Dec 9 14:31:33 fw ntpd[828]: adjusting local clock by -85380.084014s
Dec 9 14:33:12 fw ntpd[828]: adjusting local clock by -85379.589606s
​ntpctl reports:
4/4 peers valid, constraint offset -85442s, clock unsynced, clock offset is
-85378257.156ms
Any ideas what could be wrong here? I use the default ntp.conf file delivered
with OpenBSD 6.2.
In case I pasted below the dmesg output.
Regards,
Mabi
OpenBSD 6.2 (GENERIC.MP) #0: Thu Oct 12 19:53:18 CEST 2017
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8559403008 (8162MB)
avail mem = 8292978688 (7908MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x7f520000 (53 entries)
bios0: vendor American Megatrends Inc. version "5.6.5" date 02/26/2016
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP FPDT MCFG WDAT UEFI APIC BDAT HPET SSDT SPCR HEST BERT
ERST EINJ
acpi0: wakeup devices PS2K(S0) PS2M(S0) PEX1(S0) PEX2(S0) PEX3(S0) PEX4(S0)
EHC1(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU C2518 @ 1.74GHz, 1750.32 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: TSC frequency 1750324380 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU C2518 @ 1.74GHz, 1750.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Atom(TM) CPU C2518 @ 1.74GHz, 1750.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Atom(TM) CPU C2518 @ 1.74GHz, 1750.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (PEX2)
acpiprt3 at acpi0: bus 3 (PEX3)
acpiprt4 at acpi0: bus 4 (PEX4)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
"PNP0003" at acpi0 not configured
"PNP0F03" at acpi0 not configured
"PNP0C33" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x1f0d rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel Atom C2000 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I210 Fiber" rev 0x03: msi, address <EDITED>
ppb1 at pci0 dev 2 function 0 "Intel Atom C2000 PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I210 Fiber" rev 0x03: msi, address <EDITED>
ppb2 at pci0 dev 3 function 0 "Intel Atom C2000 PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel Atom C2000 PCIE" rev 0x02: msi
pci4 at ppb3 bus 4
athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 23
athn0: AR9280 rev 2 (2T2R), ROM rev 16, address <EDITED>
vendor "Intel", unknown product 0x1f18 (class processor subclass Co-processor,
rev 0x02) at pci0 dev 11 function 0 not configured
pchb1 at pci0 dev 14 function 0 "Intel Atom C2000 RAS" rev 0x02
"Intel Atom C2000 RCEC" rev 0x02 at pci0 dev 15 function 0 not configured
"Intel Atom C2000 SMBus" rev 0x02 at pci0 dev 19 function 0 not configured
em2 at pci0 dev 20 function 0 "Intel I354 SGMII" rev 0x03: msi, address <EDITED>
em3 at pci0 dev 20 function 1 "Intel I354 SGMII" rev 0x03: msi, address <EDITED>
em4 at pci0 dev 20 function 2 "Intel I354 SGMII" rev 0x03: msi, address <EDITED>
em5 at pci0 dev 20 function 3 "Intel I354 SGMII" rev 0x03: msi, address <EDITED>
ehci0 at pci0 dev 22 function 0 "Intel Atom C2000 USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ahci0 at pci0 dev 24 function 0 "Intel Atom C2000 AHCI" rev 0x02: msi, AHCI 1.3
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, TS32GMSA370, N112> SCSI3 0/direct fixed
t10.ATA_TS32GMSA370_D941170451_
sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin
pcib0 at pci0 dev 31 function 0 "Intel Atom C2000 PCU" rev 0x02
ichiic0 at pci0 dev 31 function 3 "Intel Atom C2000 PCU SMBus" rev 0x02: apic 2
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0xa00/8: W83627DHG
vmm0 at mainbus0: VMX/EPT
uhub1 at uhub0 port 1 configuration 1 interface 0 "Intel product 0x07db" rev
2.00/0.02 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (1394ba51889b153b.a) swap on sd0b dump on sd0b
