Hello, I just upgraded a Thinkpad T43 from OpenBSD 6.1 release to 6.2 release and now the console resolution is not computed correctly anymore so only the upper left part of the screen is actually used (very similar to what is described here: https://marc.info/?l=openbsd-misc&m=150825563609653). X11 works fine.
$ doas wsconsctl | egrep display doas ([email protected]) password: wsconsctl: Use explicit arg to view keyboard.map. display.type=inteldrm display.width=848 display.height=480 display.depth=32 display.emulations=vt100 display.screentypes=std display.focus=4 display.screen_on=250 display.screen_off=0 display.vblank=off display.kbdact=on display.msact=on display.outact=on $ xrandr Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.00*+ 800x600 60.32 56.25 640x480 59.94 TV1 disconnected (normal left inverted right x axis y axis) VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) I don't have any /etc/wsconsctl.conf. The dmesg output for 6.1 and 6.2 are below, and here's the diff: $ diff dmesg* 1,3c1,3 < OpenBSD 6.2 (GENERIC) #2: Sun Dec 10 20:46:13 CET 2017 < [email protected]:/usr/src/sys/arch/i386/compile/GENERIC < cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz --- > OpenBSD 6.1 (GENERIC) #17: Thu Aug 3 16:54:00 CEST 2017 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 799 > MHz 6c6 < avail mem = 1029193728 (981MB) --- > avail mem = 1030520832 (982MB) 24d23 < , remapped to apid 1 37a37 > "PNP0303" at acpi0 not configured 38a39 > "PNP0501" at acpi0 not configured 47c48 < cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz --- > cpu0: Enhanced SpeedStep 799 MHz: speeds: 1600, 1333, 1066, 800 MHz 55c56 < inteldrm0: 848x480, 32bpp --- > inteldrm0: 1024x768, 32bpp 111c112 < pms0: Synaptics touchpad, firmware 5.9, 0x2c6ab1 0x0 --- > pms0: Synaptics touchpad, firmware 5.9 145c146 < Wed Jan 17 12:59:45 CST 2018 --- > Sun Aug 20 00:03:54 CST 2017 It's not really a big deal but is there a way to fix this? $ doas wsconsctl display.width=1024 display.height=768 doas ([email protected]) password: wsconsctl: display.width: read only wsconsctl: display.height: read only Thank you. Philippe ======== OpenBSD 6.1 (GENERIC) #17: Thu Aug 3 16:54:00 CEST 2017 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 799 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,EST,TM2,PERF real mem = 1063600128 (1014MB) avail mem = 1030520832 (982MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 05/29/07, BIOS32 rev. 0 @ 0xfd740, SMBIOS rev. 2.33 @ 0xe0010 (64 entries) bios0: vendor IBM version "70ET69WW (1.29 )" date 05/29/2007 bios0: IBM 1875E5U acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG BOOT acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB3(S3) USB7(S3) AC9M(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EXP0) acpiprt2 at acpi0: bus -1 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus -1 (EXP3) acpiprt5 at acpi0: bus 4 (PCI1) acpicpu0 at acpi0 C1: unknown FFH class 0: !C3(250@85 io@0x1015), !C2(500@1 io@0x1014), C1(@1 halt!), PSS acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7 acpitz0 at acpi0: critical temperature is 99 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "PNP0303" at acpi0 not configured "IBM0057" at acpi0 not configured "PNP0501" at acpi0 not configured "PNP0400" at acpi0 not configured "NSC1100" at acpi0 not configured acpibat0 at acpi0: BAT0 model "IBM-92P1091" serial 1313 type LION oem "Panasonic" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: DOCK not docked (0) acpivideo0 at acpi0: VID_ bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0: Enhanced SpeedStep 799 MHz: speeds: 1600, 1333, 1066, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03 inteldrm0 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xb0000000, size 0x10000000 inteldrm0: apic 1 int 16 inteldrm0: 1024x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 1 int 20 pci1 at ppb0 bus 2 bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): apic 1 int 16, address 00:10:c6:e1:f8:03 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb1 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: apic 1 int 22 pci2 at ppb1 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 19 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3 pci3 at ppb2 bus 4 cbb0 at pci3 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16 ath0 at pci3 dev 2 function 0 "Atheros AR5212" rev 0x01: apic 1 int 21 ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6 eeprom 4.8, WOR01W, address 00:14:a4:72:72:c6 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 5 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int 22, ICH6 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <HTS541060G9AT00> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.02> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: apic 1 int 23 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 5.9 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd0: 57231MB, 512 bytes/sector, 117209648 sectors root on sd0a (1b901368c9f9e170.a) swap on sd0b dump on sd0b Automatic boot in progress: starting file system checks. /dev/sd0a (1b901368c9f9e170.a): file system is clean; not checking /dev/sd0d (1b901368c9f9e170.d): file system is clean; not checking /dev/sd0e (1b901368c9f9e170.e): file system is clean; not checking setting tty flags pf enabled starting network reordering libraries: done. starting early daemons: syslogd. starting RPC daemons:. savecore: no core dump checking quotas: done. clearing /tmp kern.securelevel: 0 -> 1 creating runtime link editor directory cache. preserving editor files. starting network daemons: smtpd sndiod. starting package daemons: cupsd. site-specific startup actions: atactl. starting local daemons: apmd cron. Sun Aug 20 00:03:54 CST 2017 ======== OpenBSD 6.2 (GENERIC) #2: Sun Dec 10 20:46:13 CET 2017 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,EST,TM2,PERF real mem = 1063600128 (1014MB) avail mem = 1029193728 (981MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 05/29/07, BIOS32 rev. 0 @ 0xfd740, SMBIOS rev. 2.33 @ 0xe0010 (64 entries) bios0: vendor IBM version "70ET69WW (1.29 )" date 05/29/2007 bios0: IBM 1875E5U acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG BOOT acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB3(S3) USB7(S3) AC9M(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins , remapped to apid 1 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (EXP0) acpiprt2 at acpi0: bus -1 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus -1 (EXP3) acpiprt5 at acpi0: bus 4 (PCI1) acpicpu0 at acpi0 C1: unknown FFH class 0: !C3(250@85 io@0x1015), !C2(500@1 io@0x1014), C1(@1 halt!), PSS acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7 acpitz0 at acpi0: critical temperature is 99 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "IBM0057" at acpi0 not configured "PNP0400" at acpi0 not configured "NSC1100" at acpi0 not configured acpibat0 at acpi0: BAT0 model "IBM-92P1091" serial 1313 type LION oem "Panasonic" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: DOCK not docked (0) acpivideo0 at acpi0: VID_ bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03 inteldrm0 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xb0000000, size 0x10000000 inteldrm0: apic 1 int 16 inteldrm0: 848x480, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 1 int 20 pci1 at ppb0 bus 2 bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): apic 1 int 16, address 00:10:c6:e1:f8:03 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb1 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: apic 1 int 22 pci2 at ppb1 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 19 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3 pci3 at ppb2 bus 4 cbb0 at pci3 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16 ath0 at pci3 dev 2 function 0 "Atheros AR5212" rev 0x01: apic 1 int 21 ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6 eeprom 4.8, WOR01W, address 00:14:a4:72:72:c6 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 5 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int 22, ICH6 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <HTS541060G9AT00> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.02> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: apic 1 int 23 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 5.9, 0x2c6ab1 0x0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd0: 57231MB, 512 bytes/sector, 117209648 sectors root on sd0a (1b901368c9f9e170.a) swap on sd0b dump on sd0b Automatic boot in progress: starting file system checks. /dev/sd0a (1b901368c9f9e170.a): file system is clean; not checking /dev/sd0d (1b901368c9f9e170.d): file system is clean; not checking /dev/sd0e (1b901368c9f9e170.e): file system is clean; not checking setting tty flags pf enabled starting network reordering libraries: done. starting early daemons: syslogd. starting RPC daemons:. savecore: no core dump checking quotas: done. clearing /tmp kern.securelevel: 0 -> 1 creating runtime link editor directory cache. preserving editor files. starting network daemons: smtpd sndiod. starting package daemons: cupsd. site-specific startup actions: atactl. starting local daemons: apmd cron. Wed Jan 17 12:59:45 CST 2018
