Hi Jonathan,
it took me some time to verify, so sorry for the long answer.
I updated my T60 to OpenBSD 6.2 and both the Touchpad as the Track
Pointer work fine without tricks of suspend/resume.
bios0 at mainbus0: date 04/01/10, BIOS32 rev. 0 @ 0xfd6b0, SMBIOS rev.
2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "79ETE6WW (2.26 )" date 04/01/2010
bios0: LENOVO 2007WRU
pms0: Synaptics touchpad, firmware 6.2, 0x81a0b1 0x300000
Maybe different revisions of firmware/BIOS?
If I may ask, does screen brightness work for you? I have a dim
setting and can't change it with the keyboard blue keys, but.
I also tried xbacklight
$ xbacklight
No outputs have backlight property
So... I'm stuck with something that is too dim with normal office
lightning and too bright for an evening hack :)
Cheers,
Riccardo
On 2018-01-11 13:23:08 +0100 Jonathan Thornburg
<[email protected]> wrote:
A further update... after a suspend-resume cycle (suspend-to-RAM,
which 'just works' via Fn-F4), the touchpad works fine. 'dmesg' shows
15 new lines appended after my most recent suspend-resume cycle, but
none of them mention the mouse (pms0) explicitly:
WARNING !(rw_status(&mode_config->mutex) == 0x0001UL) &&
!drm_modeset_is_locked(&mode_config->connection_mutex) failed at
/sys/dev/pci/drm/drm_crtc.h:1577
WARNING !(rw_status(&mode_config->mutex) == 0x0001UL) &&
!drm_modeset_is_locked(&mode_config->connection_mutex) failed at
/sys/dev/pci/drm/drm_crtc.h:1577
uhub0 detached
uhub1 detached
uhub2 detached
uhub3 detached
uhub4 detached
uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00
addr 1
uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00
addr 1
uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00
addr 1
uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00
addr 1
uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00
addr 1
drm:pid80100:radeon_bo_unpin *WARNING* 0xffff800000444390 unpin not
necessary
WARNING !(rw_status(&mode_config->mutex) == 0x0001UL) &&
!drm_modeset_is_locked(&mode_config->connection_mutex) failed at
/sys/dev/pci/drm/drm_crtc.h:1577
WARNING !(rw_status(&mode_config->mutex) == 0x0001UL) &&
!drm_modeset_is_locked(&mode_config->connection_mutex) failed at
/sys/dev/pci/drm/drm_crtc.h:1577
Do other T60/T60p users see touchpad problems?
