On 02/08/18 06:03, Chris Bennett wrote: > Does any of my hardware work in -current? > Lots of stuff fails in 6.2 stable. > WiFi and touchpad being especially desired, of course! > > If WiFi isn't a go, can anyone recommend a USB WiFi stick? The easiest way to check is to install the most recent snapshot you can get your hands on and see. If you don't want to mess with a somewhat working setup, do an install onto a removable device (USB storage perhaps) and boot from that.
A quick look a tthe dmesg: > re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x07: RTL8106E (0x4480), > msi, address 54:e1:ad:18:86:57 > rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2 re(4) wired Ethernet, at least, apparently only 10/100 Mbit though [ ... ] > ugen0 at uhub2 port 2 "Atheros Communications product 0xe500" rev 2.01/0.01 > addr 4 Could be a wireless network card - there has been some work on athn(4) recently, but I don't have any of the hardware to hand so I'm guessing. - Peter -- Peter N. M. Hansteen, member of the first RFC 1149 implementation team http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/ "Remember to set the evil bit on all malicious network traffic" delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
