On Thu, Feb 15, 2018 at 07:10:26PM -0500, Jiri B wrote:
> Is it possible to run 'dummy' based X11 (should be better that Xvfb)[1] inside
> VMM VM?
> 

what are you trying to accomplish?

> $ Xorg -noreset +extension GLX +extension RANDR +extension RENDER -logfile 
> ./10.log -config ./xorg.conf :10
> (EE)
> Fatal server error:
> (EE) xf86OpenConsole: No console driver found
>         Supported drivers: wscons
>         Check your kernel's console driver configuration and /dev entries(EE)
> (EE)
> Please consult the The X.Org Foundation support
>          at http://wiki.x.org
>  for help.
> (EE) Please also check the log file at "./10.log" for additional information.
> (EE)
> (EE) Server terminated with error (1). Closing log file.
> 
> $ cat 10.log
> [    62.900] (--) checkDevMem: using aperture driver /dev/xf86
> [    62.969] (EE) 
> Fatal server error:
> [    62.970] (EE) xf86OpenConsole: No console driver found
>         Supported drivers: wscons
>         Check your kernel's console driver configuration and /dev entries(EE) 
> [    62.973] (EE) 
> Please consult the The X.Org Foundation support 
>          at http://wiki.x.org
>  for help. 
> [    62.974] (EE) Please also check the log file at "./10.log" for additional 
> information.
> [    62.976] (EE) 
> [    62.992] (EE) Server terminated with error (1). Closing log file.
> 
> xorg.conf is from https://xpra.org/xorg.conf (attached in the end of the 
> mail).
> 
> But same xorg.conf and same command work OK on headless baremetal.
> 
> [1] http://xpra.org/trac/wiki/Xdummy
> [2] https://xpra.org/xorg.conf
> 
> Jiri
> 
> - from host
> 
> OpenBSD 6.2-current (GENERIC.MP) #6: Tue Feb 13 20:16:11 MST 2018
>     dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8564375552 (8167MB)
> avail mem = 8297807872 (7913MB)
> enter_shared_special_pages: entered idt page va 0xffff800000010000 pa 
> 0x1d5a000
> enter_shared_special_pages: entered kutext page va 0xffffffff81831000 pa 
> 0x1831000
> enter_shared_special_pages: entered kutext page va 0xffffffff81832000 pa 
> 0x1832000
> enter_shared_special_pages: entered kutext page va 0xffffffff81833000 pa 
> 0x1833000
> enter_shared_special_pages: entered kudata page va 0xffffffff81ac9000 pa 
> 0x1ac9000
> cpu_enter_pages: entered tss+gdt page at va 0xffffffff81abd000 pa 0x1abd000
> cpu_enter_pages: entered t.stack page at va 0xffffffff81abe000 pa 0x1abe000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffffffff81abe3e0
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9f000 (68 entries)
> bios0: vendor American Megatrends Inc. version "1.1" date 05/27/2010
> bios0: Supermicro X8SIL
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI DMAR SSDT
> acpi0: wakeup devices P0P1(S4) P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) BR1E(S4) 
> USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) GBE_(S4) 
> BR20(S4) BR21(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> lapic_map: entered lapic page va 0xffffffff81ab2000 pa 0xfee00000
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.93 MHz
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> acpitimer0: recalibrated TSC frequency 1866669986 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 133MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0cpu_enter_pages: entered tss+gdt page at va 
> 0xffff800021fff000 pa 0x10f7ab000
> cpu_enter_pages: entered t.stack page at va 0xffff800022000000 pa 0x10f7ac000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffff8000220003e0
> : apid 2 (application processor)
> cpu1: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.67 MHz
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0cpu_enter_pages: entered tss+gdt page at va 
> 0xffff800022010000 pa 0x10f7b6000
> cpu_enter_pages: entered t.stack page at va 0xffff800022011000 pa 0x10f7b7000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffff8000220113e0
> : apid 4 (application processor)
> cpu2: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.67 MHz
> cpu2: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0cpu_enter_pages: entered tss+gdt page at va 
> 0xffff800022019000 pa 0x10f7b9000
> cpu_enter_pages: entered t.stack page at va 0xffff80002201a000 pa 0x10f7ba000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffff80002201a3e0
> : apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.67 MHz
> cpu3: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0cpu_enter_pages: entered tss+gdt page at va 
> 0xffff800022022000 pa 0x10f7bc000
> cpu_enter_pages: entered t.stack page at va 0xffff800022023000 pa 0x10f7bd000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffff8000220233e0
> : apid 1 (application processor)
> cpu4: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.67 MHz
> cpu4: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0cpu_enter_pages: entered tss+gdt page at va 
> 0xffff80002202b000 pa 0x10f7bf000
> cpu_enter_pages: entered t.stack page at va 0xffff80002202c000 pa 0x10f7c0000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffff80002202c3e0
> : apid 3 (application processor)
> cpu5: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.67 MHz
> cpu5: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0cpu_enter_pages: entered tss+gdt page at va 
> 0xffff800022034000 pa 0x10f7c2000
> cpu_enter_pages: entered t.stack page at va 0xffff800022035000 pa 0x10f7c3000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffff8000220353e0
> : apid 5 (application processor)
> cpu6: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.67 MHz
> cpu6: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0cpu_enter_pages: entered tss+gdt page at va 
> 0xffff80002203d000 pa 0x10f7c5000
> cpu_enter_pages: entered t.stack page at va 0xffff80002203e000 pa 0x10f7c6000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffff80002203e3e0
> : apid 7 (application processor)
> cpu7: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.67 MHz
> cpu7: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> , remapped to apid 8
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318179 Hz
> acpihpet0: recalibrated TSC frequency 1866676240 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (P0P3)
> acpiprt3 at acpi0: bus 2 (P0P5)
> acpiprt4 at acpi0: bus -1 (P0P6)
> acpiprt5 at acpi0: bus 6 (BR1E)
> acpiprt6 at acpi0: bus 3 (BR20)
> acpiprt7 at acpi0: bus 4 (BR24)
> acpiprt8 at acpi0: bus 5 (BR25)
> acpicpu0 at acpi0: !C3(350@17 mwait.1@0x20), !C2(500@17 mwait.1@0x10), 
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: !C3(350@17 mwait.1@0x20), !C2(500@17 mwait.1@0x10), 
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: !C3(350@17 mwait.1@0x20), !C2(500@17 mwait.1@0x10), 
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: !C3(350@17 mwait.1@0x20), !C2(500@17 mwait.1@0x10), 
> C1(1000@1 mwait.1), PSS
> acpicpu4 at acpi0: !C3(350@17 mwait.1@0x20), !C2(500@17 mwait.1@0x10), 
> C1(1000@1 mwait.1), PSS
> acpicpu5 at acpi0: !C3(350@17 mwait.1@0x20), !C2(500@17 mwait.1@0x10), 
> C1(1000@1 mwait.1), PSS
> acpicpu6 at acpi0: !C3(350@17 mwait.1@0x20), !C2(500@17 mwait.1@0x10), 
> C1(1000@1 mwait.1), PSS
> acpicpu7 at acpi0: !C3(350@17 mwait.1@0x20), !C2(500@17 mwait.1@0x10), 
> C1(1000@1 mwait.1), PSS
> acpibtn0 at acpi0: PWRB
> ipmi at mainbus0 not configured
> cpu0: Enhanced SpeedStep 1866 MHz: speeds: 1868, 1867, 1733, 1600, 1467, 
> 1333, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
> ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: msi
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 5 function 0 "Intel Core PCIE" rev 0x11: msi
> pci2 at ppb1 bus 2
> em0 at pci2 dev 0 function 0 "Intel 82576" rev 0x01: msi, address 
> 90:e2:ba:04:28:c0
> em1 at pci2 dev 0 function 1 "Intel 82576" rev 0x01: msi, address 
> 90:e2:ba:04:28:c1
> "Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
> "Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
> "Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
> "Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
> "Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
> "Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 8 int 21
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
> addr 1
> ppb2 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
> pci3 at ppb2 bus 3
> em2 at pci3 dev 0 function 0 "Intel 82576" rev 0x01: msi, address 
> 90:e2:ba:04:2d:74
> em3 at pci3 dev 0 function 1 "Intel 82576" rev 0x01: msi, address 
> 90:e2:ba:04:2d:75
> ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05: msi
> pci4 at ppb3 bus 4
> em4 at pci4 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 
> 00:25:90:3c:66:00
> ppb4 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x05: msi
> pci5 at ppb4 bus 5
> em5 at pci5 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 
> 00:25:90:3c:66:01
> ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 8 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
> addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
> pci6 at ppb5 bus 6
> vga1 at pci6 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
> ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 3.0Gb/s
> ahci0: port 2: 3.0Gb/s
> ahci0: port 3: 3.0Gb/s
> ahci0: port 4: 3.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD7500BPKT-6, 01.0> SCSI3 0/direct 
> fixed naa.50014ee6580d48d5
> sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD7500BPKT-6, 01.0> SCSI3 0/direct 
> fixed naa.50014ee6580d4746
> sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
> sd2 at scsibus1 targ 2 lun 0: <ATA, ST1000VX000-1ES1, CV27> SCSI3 0/direct 
> fixed naa.5000c5009387182f
> sd2: 953869MB, 512 bytes/sector, 1953525168 sectors
> sd3 at scsibus1 targ 3 lun 0: <ATA, ST1000VX000-1ES1, CV27> SCSI3 0/direct 
> fixed naa.5000c500939203ed
> sd3: 953869MB, 512 bytes/sector, 1953525168 sectors
> sd4 at scsibus1 targ 4 lun 0: <ATA, OCZ-VERTEX3, 2.22> SCSI3 0/direct fixed 
> naa.5e83a97e2078f993
> sd4: 122104MB, 512 bytes/sector, 250069680 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 8 int 18
> iic0 at ichiic0
> sdtemp0 at iic0 addr 0x18: mcp98243
> sdtemp1 at iic0 addr 0x1a: mcp98243
> "eeprom" at iic0 addr 0x50 not configured
> "eeprom" at iic0 addr 0x52 not configured
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25
> wbsio0 port 0xa10/2 not configured
> vmm0 at mainbus0: VMX/EPT
> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" 
> rev 2.00/0.00 addr 2
> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Winbond Electronics Corp 
> Hermon USB hidmouse Device" rev 1.10/0.01 addr 3
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhidev1 at uhub2 port 2 configuration 1 interface 1 "Winbond Electronics Corp 
> Hermon USB hidmouse Device" rev 1.10/0.01 addr 3
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" 
> rev 2.00/0.00 addr 2
> uhidev2 at uhub3 port 2 configuration 1 interface 0 "American Power 
> Conversion Back-UPS XS 1400U  FW:926.T2 .I USB FW:T2" rev 1.10/1.06 addr 3
> uhidev2: iclass 3/0, 123 report ids
> upd0 at uhidev2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> ...
> machdep.allowaperture: 0 -> 2
> 
> - guest
> 
> OpenBSD 6.2-current (GENERIC.MP) #6: Tue Feb 13 20:16:11 MST 2018
>     dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 2130706432 (2032MB)
> avail mem = 2059182080 (1963MB)
> enter_shared_special_pages: entered idt page va 0xffff800000010000 pa 
> 0x1d55000
> enter_shared_special_pages: entered kutext page va 0xffffffff81831000 pa 
> 0x1831000
> enter_shared_special_pages: entered kutext page va 0xffffffff81832000 pa 
> 0x1832000
> enter_shared_special_pages: entered kutext page va 0xffffffff81833000 pa 
> 0x1833000
> enter_shared_special_pages: entered kudata page va 0xffffffff81ac9000 pa 
> 0x1ac9000
> cpu_enter_pages: entered tss+gdt page at va 0xffffffff81abd000 pa 0x1abd000
> cpu_enter_pages: entered t.stack page at va 0xffffffff81abe000 pa 0x1abe000
> cpu_enter_pages: cif_tss.tss_rsp0 = 0xffffffff81abe3e0
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0
> acpi at bios0 not configured
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1857.87 MHz
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,HV,NXE,RDTSCP,LONG,LAHF,ITSC,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> pvbus0 at mainbus0: OpenBSD
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
> virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
> viornd0 at virtio0
> virtio0: irq 3
> virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Storage" rev 0x00
> vioblk0 at virtio1
> scsibus1 at vioblk0: 2 targets
> sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
> sd0: 20480MB, 512 bytes/sector, 41943040 sectors
> virtio1: irq 5
> virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00
> vioblk1 at virtio2
> scsibus2 at vioblk1: 2 targets
> sd1 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
> sd1: 102400MB, 512 bytes/sector, 209715200 sectors
> virtio2: irq 6
> virtio3 at pci0 dev 4 function 0 "Qumranet Virtio Storage" rev 0x00
> vioblk2 at virtio3
> scsibus3 at vioblk2: 2 targets
> sd2 at scsibus3 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
> sd2: 20480MB, 512 bytes/sector, 41943040 sectors
> virtio3: irq 7
> virtio4 at pci0 dev 5 function 0 "Qumranet Virtio Network" rev 0x00
> vio0 at virtio4: address fe:e1:bb:d1:f6:d2
> virtio4: irq 9
> virtio5 at pci0 dev 6 function 0 "OpenBSD VMM Control" rev 0x00
> vmmci0 at virtio5
> virtio5: irq 10
> isa0 at mainbus0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo
> com0: console
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd0a (f5e67d8559c9bc27.a) swap on sd0b dump on sd0b
> 
> $ sysctl -a | grep aper                                                       
>                                                                               
>                                                                            
> machdep.allowaperture=2
> 
> - xorg.conf
> 
> # This xorg configuration file is meant to be used by xpra
> # to start a dummy X11 server.
> # For details, please see:
> # https://xpra.org/Xdummy.html
> 
> Section "ServerFlags"
>   Option "DontVTSwitch" "true"
>   Option "AllowMouseOpenFail" "true"
>   Option "PciForceNone" "true"
>   Option "AutoEnableDevices" "false"
>   Option "AutoAddDevices" "false"
> EndSection
> 
> Section "InputDevice"
>   Identifier "dummy_mouse"
>   Option "CorePointer" "true"
>   Driver "void"
> EndSection
> 
> Section "InputDevice"
>   Identifier "dummy_keyboard"
>   Option "CoreKeyboard" "true"
>   Driver "void"
> EndSection
> 
> Section "Device"
>   Identifier "dummy_videocard"
>   Driver "dummy"
>   Option "ConstantDPI" "true"
>   #VideoRam 4096000
>   #VideoRam 256000
>   VideoRam 192000
> EndSection
> 
> Section "Monitor"
>   Identifier "dummy_monitor"
>   HorizSync   5.0 - 1000.0
>   VertRefresh 5.0 - 200.0
>   #This can be used to get a specific DPI, but only for the default 
> resolution:
>   #DisplaySize 508 317
>   #NOTE: the highest modes will not work without increasing the VideoRam
>   # for the dummy video card.
>   Modeline "32768x32768" 15226.50 32768 35800 39488 46208 32768 32771 32781 
> 32953
>   Modeline "32768x16384" 7516.25 32768 35544 39192 45616 16384 16387 16397 
> 16478
>   Modeline "16384x8192" 2101.93 16384 16416 24400 24432 8192 8390 8403 8602
>   Modeline "8192x4096" 424.46 8192 8224 9832 9864 4096 4195 4202 4301
>   Modeline "5496x1200" 199.13 5496 5528 6280 6312 1200 1228 1233 1261
>   Modeline "5280x1080" 169.96 5280 5312 5952 5984 1080 1105 1110 1135
>   Modeline "5280x1200" 191.40 5280 5312 6032 6064 1200 1228 1233 1261
>   Modeline "5120x3200" 199.75 5120 5152 5904 5936 3200 3277 3283 3361
>   Modeline "4800x1200" 64.42 4800 4832 5072 5104 1200 1229 1231 1261
>   Modeline "3840x2880" 133.43 3840 3872 4376 4408 2880 2950 2955 3025
>   Modeline "3840x2560" 116.93 3840 3872 4312 4344 2560 2622 2627 2689
>   Modeline "3840x2048" 91.45 3840 3872 4216 4248 2048 2097 2101 2151
>   Modeline "3840x1080" 100.38 3840 3848 4216 4592 1080 1081 1084 1093
>   Modeline "3600x1200" 106.06 3600 3632 3984 4368 1200 1201 1204 1214
>   Modeline "3288x1080" 39.76 3288 3320 3464 3496 1080 1106 1108 1135
>   Modeline "2048x2048" 49.47 2048 2080 2264 2296 2048 2097 2101 2151
>   Modeline "2048x1536" 80.06 2048 2104 2312 2576 1536 1537 1540 1554
>   Modeline "2560x1600" 47.12 2560 2592 2768 2800 1600 1639 1642 1681
>   Modeline "2560x1440" 42.12 2560 2592 2752 2784 1440 1475 1478 1513
>   Modeline "1920x1440" 69.47 1920 1960 2152 2384 1440 1441 1444 1457
>   Modeline "1920x1200" 26.28 1920 1952 2048 2080 1200 1229 1231 1261
>   Modeline "1920x1080" 23.53 1920 1952 2040 2072 1080 1106 1108 1135
>   Modeline "1680x1050" 20.08 1680 1712 1784 1816 1050 1075 1077 1103
>   Modeline "1600x1200" 22.04 1600 1632 1712 1744 1200 1229 1231 1261
>   Modeline "1600x900" 33.92 1600 1632 1760 1792 900 921 924 946
>   Modeline "1440x900" 30.66 1440 1472 1584 1616 900 921 924 946
>   ModeLine "1366x768" 72.00 1366 1414 1446 1494  768 771 777 803
>   Modeline "1280x1024" 31.50 1280 1312 1424 1456 1024 1048 1052 1076
>   Modeline "1280x800" 24.15 1280 1312 1400 1432 800 819 822 841
>   Modeline "1280x768" 23.11 1280 1312 1392 1424 768 786 789 807
>   Modeline "1360x768" 24.49 1360 1392 1480 1512 768 786 789 807
>   Modeline "1024x768" 18.71 1024 1056 1120 1152 768 786 789 807
>   Modeline "768x1024" 19.50 768 800 872 904 1024 1048 1052 1076
> 
> 
>   #common resolutions for android devices (both orientations):
>   Modeline "800x1280" 25.89 800 832 928 960 1280 1310 1315 1345
>   Modeline "1280x800" 24.15 1280 1312 1400 1432 800 819 822 841
>   Modeline "720x1280" 30.22 720 752 864 896 1280 1309 1315 1345
>   Modeline "1280x720" 27.41 1280 1312 1416 1448 720 737 740 757
>   Modeline "768x1024" 24.93 768 800 888 920 1024 1047 1052 1076
>   Modeline "1024x768" 23.77 1024 1056 1144 1176 768 785 789 807
>   Modeline "600x1024" 19.90 600 632 704 736 1024 1047 1052 1076
>   Modeline "1024x600" 18.26 1024 1056 1120 1152 600 614 617 631
>   Modeline "536x960" 16.74 536 568 624 656 960 982 986 1009
>   Modeline "960x536" 15.23 960 992 1048 1080 536 548 551 563
>   Modeline "600x800" 15.17 600 632 688 720 800 818 822 841
>   Modeline "800x600" 14.50 800 832 880 912 600 614 617 631
>   Modeline "480x854" 13.34 480 512 560 592 854 873 877 897
>   Modeline "848x480" 12.09 848 880 920 952 480 491 493 505
>   Modeline "480x800" 12.43 480 512 552 584 800 818 822 841
>   Modeline "800x480" 11.46 800 832 872 904 480 491 493 505
>   #resolutions for android devices (both orientations)
>   #minus the status bar
>   #38px status bar (and width rounded up)
>   Modeline "800x1242" 25.03 800 832 920 952 1242 1271 1275 1305
>   Modeline "1280x762" 22.93 1280 1312 1392 1424 762 780 783 801
>   Modeline "720x1242" 29.20 720 752 856 888 1242 1271 1276 1305
>   Modeline "1280x682" 25.85 1280 1312 1408 1440 682 698 701 717
>   Modeline "768x986" 23.90 768 800 888 920 986 1009 1013 1036
>   Modeline "1024x730" 22.50 1024 1056 1136 1168 730 747 750 767
>   Modeline "600x986" 19.07 600 632 704 736 986 1009 1013 1036
>   Modeline "1024x562" 17.03 1024 1056 1120 1152 562 575 578 591
>   Modeline "536x922" 16.01 536 568 624 656 922 943 947 969
>   Modeline "960x498" 14.09 960 992 1040 1072 498 509 511 523
>   Modeline "600x762" 14.39 600 632 680 712 762 779 783 801
>   Modeline "800x562" 13.52 800 832 880 912 562 575 578 591
>   Modeline "480x810" 12.59 480 512 552 584 810 828 832 851
>   Modeline "848x442" 11.09 848 880 920 952 442 452 454 465
>   Modeline "480x762" 11.79 480 512 552 584 762 779 783 801
> EndSection
> 
> Section "Screen"
>   Identifier "dummy_screen"
>   Device "dummy_videocard"
>   Monitor "dummy_monitor"
>   DefaultDepth 24
>   SubSection "Display"
>     Viewport 0 0
>     Depth 24
>     #Modes "32768x32768" "32768x16384" "16384x8192" "8192x4096" "5120x3200" 
> "3840x2880" "3840x2560" "3840x2048" "2048x2048" "2560x1600" "1920x1440" 
> "1920x1200" "1920x1080" "1600x1200" "1680x1050" "1600x900" "1400x1050" 
> "1440x900" "1280x1024" "1366x768" "1280x800" "1024x768" "1024x600" "800x600" 
> "320x200"
>     Modes "5120x3200" "3840x2880" "3840x2560" "3840x2048" "2048x2048" 
> "2560x1600" "1920x1440" "1920x1200" "1920x1080" "1600x1200" "1680x1050" 
> "1600x900" "1400x1050" "1440x900" "1280x1024" "1366x768" "1280x800" 
> "1024x768" "1024x600" "800x600" "320x200"
>     #Virtual 32000 32000
>     #Virtual 16384 8192
>     Virtual 8192 4096
>     #Virtual 5120 3200
>   EndSubSection
> EndSection
> 
> Section "ServerLayout"
>   Identifier   "dummy_layout"
>   Screen       "dummy_screen"
>   InputDevice  "dummy_mouse"
>   InputDevice  "dummy_keyboard"
> EndSection
> v
> 

Reply via email to