Hi, im having serious problems with (i think) arp protocol, my openbsd
firewall always tries to resolve the arp address, look at this:
# ping 200.13.161.2
PING 200.13.161.2 (200.13.161.2): 56 data bytes
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
64 bytes from 200.13.161.2: icmp_seq=7 ttl=255 time=0.684 ms
64 bytes from 200.13.161.2: icmp_seq=8 ttl=255 time=0.306 ms
64 bytes from 200.13.161.2: icmp_seq=9 ttl=255 time=0.494 ms
64 bytes from 200.13.161.2: icmp_seq=10 ttl=255 time=0.381 ms
--- 200.13.161.2 ping statistics ---
11 packets transmitted, 4 packets received, 63.6% packet loss
round-trip min/avg/max/std-dev = 0.306/0.466/0.684/0.143 ms
# ping 200.13.161.2
PING 200.13.161.2 (200.13.161.2): 56 data bytes
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 200.13.161.2 64 chars, ret=-1
64 bytes from 200.13.161.2: icmp_seq=4 ttl=255 time=0.717 ms
64 bytes from 200.13.161.2: icmp_seq=5 ttl=255 time=0.478 ms
64 bytes from 200.13.161.2: icmp_seq=6 ttl=255 time=0.512 ms
--- 200.13.161.2 ping statistics ---
7 packets transmitted, 3 packets received, 57.1% packet loss
round-trip min/avg/max/std-dev = 0.478/0.569/0.717/0.105 ms
first, i get No route to host, after a few seconds i got response, a
few second later a try again and the same No route to host problem.
any advise?
BTW , im running openbsd 3.8 on sun netra v120
thanks
