I am trying to create a VM on 6.2-stable and running into intermittent
text output on the console; it takes from 0.2 seconds to 180 seconds to
output text segments. A segment is a few bytes to several lines of
text. It times out and often enough to prevent autoinstall from
succeeding, most of the time.
For example,
Welcome to the OpenBSD/amd64 6.2 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
takes two or three minutes to appear if I do nothing, but if I type
space or backspace, I get, progressively with each keystroke:
(I)nstall,
(I)nstall, (U)pgra
(I)nstall, (U)pgrade, (A)utoinstall or
and so on.
Here are the pings during (my nth) attempt: the long intervals are
apparently when the VM gets cpu-cycles to run; the short ones are me
typing space or backspace which seems to provoke more text output from
the console.
64 bytes from 100.64.2.3: icmp_seq=120 ttl=255 time=597.000 ms
64 bytes from 100.64.2.3: icmp_seq=121 ttl=255 time=2105.320 ms
64 bytes from 100.64.2.3: icmp_seq=122 ttl=255 time=1109.594 ms
64 bytes from 100.64.2.3: icmp_seq=123 ttl=255 time=114.258 ms
64 bytes from 100.64.2.3: icmp_seq=124 ttl=255 time=11.779 ms
64 bytes from 100.64.2.3: icmp_seq=125 ttl=255 time=6.963 ms
64 bytes from 100.64.2.3: icmp_seq=126 ttl=255 time=94.081 ms
64 bytes from 100.64.2.3: icmp_seq=127 ttl=255 time=89665.142 ms
64 bytes from 100.64.2.3: icmp_seq=128 ttl=255 time=88669.742 ms
64 bytes from 100.64.2.3: icmp_seq=129 ttl=255 time=87664.155 ms
64 bytes from 100.64.2.3: icmp_seq=130 ttl=255 time=86668.707 ms
64 bytes from 100.64.2.3: icmp_seq=131 ttl=255 time=85673.139 ms
64 bytes from 100.64.2.3: icmp_seq=132 ttl=255 time=84667.626 ms
64 bytes from 100.64.2.3: icmp_seq=133 ttl=255 time=83672.081 ms
64 bytes from 100.64.2.3: icmp_seq=134 ttl=255 time=82676.615 ms
...snip....
64 bytes from 100.64.2.3: icmp_seq=217 ttl=255 time=177044.250 ms
64 bytes from 100.64.2.3: icmp_seq=218 ttl=255 time=176048.622 ms
64 bytes from 100.64.2.3: icmp_seq=219 ttl=255 time=175053.033 ms
64 bytes from 100.64.2.3: icmp_seq=220 ttl=255 time=174047.395 ms
64 bytes from 100.64.2.3: icmp_seq=221 ttl=255 time=173051.945 ms
As you can see ping intervals get bigger if I do nothing. (Autoinstall
enables DHCP which is why I can ping the VM before OpenBSD is
installed.) I'm using X and xterm to communicate with the VM serial
console.
The VM command is
# vmctl start s -Lc -m $(( 1024*1024*1024)) -b /bsd.rd -d
/home/vm/s1.disk \
-d /home/cache/pub/OpenBSD/6.2/amd64/install62.fs
So, question: is this machine (dmesg below) supported, and would there
be anything I could do to improve this?
thanks
John
OpenBSD 6.2 (GENERIC.MP) #6: Wed Feb 28 21:13:02 CET 2018
r...@syspatch-62-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3849388032 (3671MB)
avail mem = 3725651968 (3553MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf9d00 (60 entries)
bios0: vendor LENOVO version "8RET54WW (1.17 )" date 10/24/2012
bios0: LENOVO 0627RZ6
acpi0 at bios0: rev 4
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG UEFI UEFI SSDT SSDT UEFI
acpi0: wakeup devices PB4_(S4) PB5_(S4) PB6_(S4) PB7_(S4) OHC1(S3)
EHC1(S3) OHC2(S3) SBAZ(S4) GEC_(S4) P2P_(S5) SPB0(S4) SPB1(S4) SPB2(S4)
SPB3(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD E-450 APU with Radeon(tm) HD Graphics, 6422.09 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: TSC frequency 6422085150 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD E-450 APU with Radeon(tm) HD Graphics, 1646.49 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-31
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB4_)
acpiprt2 at acpi0: bus 1 (PB5_)
acpiprt3 at acpi0: bus 2 (PB6_)
acpiprt4 at acpi0: bus 3 (PB7_)
acpiprt5 at acpi0: bus 4 (P2P_)
acpiprt6 at acpi0: bus -1 (SPB0)
acpiprt7 at acpi0: bus -1 (SPB1)
acpiprt8 at acpi0: bus -1 (SPB2)
acpiprt9 at acpi0: bus -1 (SPB3)
acpiec0 at acpi0
acpicpu0 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
"LEN0026" at acpi0 not configured
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "42T4957" serial 1282 type LION oem
"SANYO"
acpibtn2 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
cpu0: 6422 MHz: speeds: 1650 1320 825 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6320" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00:
msi
azalia0: no supported codecs
ppb0 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
"Broadcom BCM43224" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: msi,
address 08:9e:01:05:27:68
atphy0 at alc0 phy 0: AR8035 10/100/1000 PHY, rev. 0
ppb2 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
rtsx0 at pci3 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01:
msi
sdmmc0 at rtsx0: 4-bit
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int
19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABF0, AM0P> SCSI3
0/direct fixed naa.5000039551c01000
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev
2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev
2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2
int 16
azalia1: codecs: Conexant CX20590
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: SVM/RVI
uvideo0 at uhub1 port 5 configuration 1 interface 0 "Image Processor
Integrated Camera" rev 2.00/41.64 addr 2
video0 at uvideo0
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub2 port 2 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (64768de88315aee0.a) swap on sd0b dump on sd0b
radeondrm0: 1366x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using
wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
