On 13 April 2018 at 08:30, jungle Boogie <jungleboog...@gmail.com> wrote:
> Hi All,
> So between Peter Hessler's post here:
> https://bsd.network/@phessler/99389809617980837
> And the install instructions for arm64:
> https://ftp.openbsd.org/pub/OpenBSD/snapshots/arm64/INSTALL.arm64
> I have the pine64-lts:
> https://www.pine64.org/?page_id=46823

Forgot the dmesg:

OpenBSD 6.3-current (RAMDISK) #235: Thu Apr 12 14:38:28 MDT 2018
real mem  = 2015993856 (1922MB)
avail mem = 1915539456 (1826MB)
mainbus0 at root: Pine64+
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x0
psci0 at mainbus0: PSCI 0.2
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4: "interrupt-controller"
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev
2.00/1.00 addr 1
com0 at simplebus0: ns16550, no working fifo
com0: console
sxitwi0 at simplebus0
iic0 at sxitwi0
sxirtc0 at simplebus0
dwxe0 at simplebus0: address 02:ba:43:50:f0:a3
rgephy0 at dwxe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 5
rgephy1 at dwxe0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio1: 32 pins
bootfile: sd0a:/bsd
boot device: lookup sd0a:/bsd failed
root on rd0a swap on rd0b dump on rd0b

Reply via email to