Same here.
Best Regards,
Peter van Oord van der Vlies
---------------------------------------------------------------------------------------------
Dear misc@,
I do not know which mailing list is the best one for such report, so I
start here.
Syspatch worked properly for 63-006 but syspatch fails on 63-007. I
tried without rebooting after 006 and after rebooting. Both situation
shows the same error pasted below. Kernel relinked properly after
applying 006.
Syspatch worked well for both on my other machine which is an amd64.
Is it necessary to provide more than the dmesg for the machine ?
HTH
raph
$ doas syspatch
Get/Verify syspatch63-007_libcryp... 100% |***********************| 5312
KB 00:10
Installing patch 007_libcrypto
gzip: stdin: Input/output error
tar: End of archive volume 1 reached
OpenBSD 6.3 (GENERIC) #2: Sun May 6 19:34:57 CEST 2018
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.10GHz ("GenuineIntel" 686-class)
1.10 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,EST,TM2,PERF
real mem = 1333088256 (1271MB)
avail mem = 1294856192 (1234MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/25/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3
@ 0xf81a0 (45 entries)
bios0: vendor Dell Inc. version "A05" date 12/25/2005
bios0: Dell Inc. Latitude X1
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S5) USB0(S0) USB1(S0) USB2(S0)
USB4(S0) USB3(S0) MODM(S3) PCIE(S4) NIC_(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCIE)
acpicpu0 at acpi0: !C3(100@185 io@0x1016), !C3(250@85 io@0x1015), !C2(500@1
io@0x1014), C1(1000@1 halt), PSS
acpitz0 at acpi0: critical temperature is 95 degC
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL 00" serial 3840 type LION oem "PSm"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpivideo0 at acpi0: VID_
acpivideo1 at acpi0: VID2
bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800
cpu0: Enhanced SpeedStep 1098 MHz: speeds: 1100, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0: apic 1 int 16
inteldrm0: 1280x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 1 int 16
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): apic 1 int 16, address 00:13:72:6a:8c:dc
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 2
cbb0 at pci2 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xb3: apic 1 int 19
"Ricoh 5C552 Firewire" rev 0x08 at pci2 dev 1 function 1 not configured
sdhc0 at pci2 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x17: apic 1 int 17
sdhc0: SDHC 1.0, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
iwi0 at pci2 dev 3 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1
int 17, address 00:13:ce:67:46:09
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int
16, ICH6
ac97: codec id 0x83847652 (SigmaTel STAC9752/53)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6006GAH>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2, 0x1a0b1 0x200000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
sdmmc0: can't enable card
ugen0 at uhub2 port 1 "Dell Bluetooth" rev 2.00/16.57 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd0: 57231MB, 512 bytes/sector, 117209648 sectors
root on sd0a (bab409f45220f130.a) swap on sd0b dump on sd0b
