Hi Alexandre, Am Freitag, Mai 25, 2018 08:41 CEST, Alexandre Ratchov <[email protected]> schrieb:
> On Fri, May 25, 2018 at 12:21:18AM +0200, Alexandre Ratchov wrote: > > > > Maybe, but unlikely. If the device attaches, generally it works. Show > > what's received on midi2 when you type on the keyboard or do any other > > simple actions. > > > > fwiw, here's a small utility that I use very often to debug & connect > MIDI ports. > > http://caoua.org/alex/obsd/midicat.tar.gz > > To connect two rmidi/2 -> rmidi/1 and dump the data on stderr, run: > > midicat -d -q rmidi/2 -q rmidi/1 Actually, that midicat seems to do the trick. When I run it in debug, and press some keys on the system-1, output looks like: f8 f8 fe f8 f8 f8 90 80 9b f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 fe f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 fe f8 90 9b b2 f8 f8 f8 f8 However, some keys I have to press multiple times until the Rocket Synth recognizes it, and some other note from the synth, doesn't produce any sound on the Rocket. However, when I connect the System 1 MIDI out, with a straight MIDI cable to MIDI in on the Rocket, I can play these notes, and it produces sound, on each key press. The System-1, as well as the TB-3 are connected to my MX-1 via USB. I noticed I have to disconnect the USB from the system-1. Only then it seems to send out MIDI data on the MIDI port. Maybe that was my main problem yesterday. Since I use the USB connection to the MX-1 for MIDI and SOUND, disconnecting the USB cable from the system-1 or tb-3 would spoil my setup. The Roland Aira gear doesn't seem to have a mode to support class compatible MIDI via USB. It only provides some USB Disk modes for backup/restore and firmware updates. I wonder how I could tell midicat which midi channel to use. I.e. I cound connect the USB-to-MIDI converter to the Roland MX-1, and since all the other gear is connected there, it might work out, when the MX-1 is set to MIDI passthrough. But I might be able to tell midish to connect that same hardware midi device as input to output, but with different midi channels? Thanks, Sebastian
