-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
I had trouble with this box with Xwindows after updating src, ports, & XF4 & rebuilding everything. I tried putting an old Voodoo Banshee in in lieu of the onboard video, did an xorgconfig, & still couldn't use X. Finally thought to disable onboard video in the bios & now X is okay. My question pertains to the output of sysctl hw.sensors. I recall playing around with it before just to see how it worked, & I don't remember some of the readings being in the output that are there now, since installing the Voodoo card. Here's the current output of sysctl hw.sensors: hw.sensors.0=lm0, VCORE_A, volts_dc, 1.73 V hw.sensors.1=lm0, VCORE_B, volts_dc, 1.74 V hw.sensors.2=lm0, +3.3V, volts_dc, 3.26 V hw.sensors.3=lm0, +5V, volts_dc, 4.91 V hw.sensors.4=lm0, +12V, volts_dc, 12.28 V hw.sensors.5=lm0, -12V, volts_dc, -11.82 V hw.sensors.6=lm0, -5V, volts_dc, 3.55 V hw.sensors.7=lm0, +5VSB, volts_dc, 4.92 V hw.sensors.8=lm0, VBAT, volts_dc, 3.26 V hw.sensors.9=lm0, Temp1, temp, 33.00 degC / 91.40 degF hw.sensors.10=lm0, Temp2, temp, 22.50 degC / 72.50 degF hw.sensors.11=lm0, Temp3, temp, 127.50 degC / 261.50 degF hw.sensors.12=lm0, Fan1, fanrpm, 4891 RPM The one that's alarming is the 2nd from last line, that says 261.50 degF. I'm wondering if that's about the video card or what. One note: the output on "that line" never changes. That's why I'm thinking it's erroneous. I googled around, read the sysctl man page, & even some stuff at kerneltrap, but I still don't understand what's going on. Below is my dmesg in case it's needed. Thanks for any help on this. Denny White OpenBSD 3.8-stable (GENERIC) #6: Fri Feb 3 03:05:23 UTC 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class) 801 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 268017664 (261736K) avail mem = 237674496 (232104K) using 3297 buffers containing 13504512 bytes (13188K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(f4) BIOS, date 07/19/02, BIOS32 rev. 0 @ 0xfb140 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/112 (5 entries) pcibios0: PCI Exclusive IRQs: 9 10 11 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04 ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 "3DFX Interactive Voodoo3" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address 00:01:80:0b:76:77 inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 xl0 at pci1 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11, address 00:01:03:1a:2f:21 bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 7 ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05 pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-00AUA1> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors wd1 at pciide0 channel 0 drive 1: <WDC WD300BB-00AUA1> wd1: 16-sector PIO, LBA, 28629MB, 58633344 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 wd1(pciide0:0:1): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HP, CD-Writer+ 9500b, 1.06> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 10 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x05: irq 9, ICH2 AC97 ac97: codec id 0x41445360 (Analog Devices AD1885) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at auich0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: W83627HF npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ed65 netmask ed65 ttymask fde7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 dkcsum: wd1 matches BIOS drive 0x81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation) Please do not CC me. Already subscribed to mailing list. GnuPG key : 0x1644E79A | http://wwwkeys.nl.pgp.net Fingerprint: D0A9 AD44 1F10 E09E 0E67 EC25 CB44 F2E5 1644 E79A iD8DBQFD48TWy0Ty5RZE55oRArNtAJ9n6X/hmMCn33QiGcqH6mgQbw+EegCfYi5W J+KF8UJyiC5nMdLqc5eBG9o= =ZvRY -----END PGP SIGNATURE-----