Marco Peereboom([EMAIL PROTECTED]) on 2006.02.03 14:30:19 +0000: > You need to give some more to work with. Can you please figure out the serial > deal and send me that output please?
Okay, the serial console does not work, despite 2 hours of trying. If anybody knows how to use serial console on an Intel SE7520JR2 board, please tell me. However, I was able to install -current: OpenBSD 3.9-beta (GENERIC) #436: Mon Jan 30 13:40:20 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC There is this in dmesg: scsibus0 at mpt0: 16 targets sd0 at scsibus0 targ 0 lun 0: <LSILOGIC, 1030 IM, 1000> SCSI2 0/direct fixed sd0: 70135MB, 70136 cyl, 16 head, 127 sec, 512 bytes/sec, 143637165 sec total mpt0: Unknown async event: 0xb mpt0: External Bus Reset mpt0: Unknown async event: 0xb mpt0: target 0 Asynchronous at 0MHz width 8bit offset 0 QAS 0 DT 0 IU 0 Now, the system has two SCSI disks that are currently configured as RAID-1 (in the LSI-SCSI Bios, i set this up while playing with FreeBSD). I then broke the mirror and the error I observed during my first install attempt was back: (hand-copied from screen) sd0(mpt0:0:0): mpt0: timeout on request index=0xf8, seq 0x000000c8 mpt0: status 0x00000000, Mask 0x00000001, Doorbell 0x24000000 mpt0: request state: OnChip mpt0: Command timeout [repeat with mpt0:1:0, ...] Setting up the mirror again now... okay, summary, in case you are confused: - system runs OpenBSD-snapshot with mirrored disks, but not without. - system works with FreeBSD, with mirrored SCSI disks and without. - system works with Linux, without mirror, not tested with. complete dmesg attached. /Benno -- Sebastian Benoit <[EMAIL PROTECTED]> My mail is GnuPG signed -- Unsigned ones are bogus -- http://www.gnupg.org/ GnuPG 0xD777DBA7 2003-09-10 D02B D0E0 3790 1AA1 DA3A B508 BF48 87BF D777 DBA7 "Next the statesmen will invent cheap lies, putting the blame upon the nation that is attacked, and every man will be glad of those conscience-soothing falsities, and will diligently study them, and refuse to examine any refutations of them; and thus he will by and by convince himself that the war is just, and will thank God for the better sleep he enjoys after this process of grotesque self-deception." -- Mark Twain
OpenBSD 3.9-beta (GENERIC) #436: Mon Jan 30 13:40:20 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 3757568000 (3669500K)
avail mem = 3224768512 (3149188K)
using 22937 buffers containing 375963648 bytes (367152K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.88 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c
"Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
"Intel E7520 MCH DMA" rev 0x0c at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpt0 at pci2 dev 5 function 0 "Symbios Logic 53c1030" rev 0x08: irq 7
mpt0: sending FW Upload request to IOC (size: 36, img size: 69796)
mpt0: IM support: 6
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <LSILOGIC, 1030 IM, 1000> SCSI2 0/direct fixed
sd0: 70135MB, 70136 cyl, 16 head, 127 sec, 512 bytes/sec, 143637165 sec total
mpt0: Unknown async event: 0xb
mpt0: External Bus Reset
mpt0: Unknown async event: 0xb
mpt0: target 0 Asynchronous at 0MHz width 8bit offset 0 QAS 0 DT 0 IU 0
mpt1 at pci2 dev 5 function 1 "Symbios Logic 53c1030" rev 0x08: irq 11
mpt1: sending FW Upload request to IOC (size: 36, img size: 69796)
mpt1: IM support: 6
scsibus1 at mpt1: 16 targets
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
em0 at pci3 dev 4 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 7,
address 00:04:23:be:5a:ea
em1 at pci3 dev 4 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 10,
address 00:04:23:be:5a:eb
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci4 at ppb3 bus 4
vga1 at pci4 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <Slimtype, COMBO SOSC-2483K, KK0A> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 11
iic at ichiic0 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
pgpdYrIMRhRDa.pgp
Description: PGP signature
