No, sometimes it just vanishes, as if the vm was halted, most of the time however it stays stuck, vmd cant be restarted or stopped until the VM's associated vmd process is killed by "kill -9". In fact the the entire system cant be halted or rebooted until theses processes get killed. There's no 100% cpu consumption, nor a spike in utilization.
On Tue, Aug 28, 2018 at 4:34 PM Mike Larkin <[email protected]> wrote: > On Tue, Aug 28, 2018 at 02:42:19PM -0300, Fabio Almeida wrote: > > In fact, it seens that any Linux, tried Alpine and Ubuntu also. > > If you have any suggestion I can give it a try. > > > > When the VM freezes, does it's associated vmd process go to 100% cpu? > > -ml > > > On Tue, Aug 28, 2018 at 2:35 PM Mike Larkin <[email protected]> > wrote: > > > > > On Tue, Aug 28, 2018 at 08:31:06AM -0300, Fabio Almeida wrote: > > > > The VM freezes, cant ssh, cant ping also. > > > > I've disabled some BIOS settings like AMT and other cpu related > security > > > > settings, but it had no effect as a VM just froze again. > > > > > > > > > > Is it only CentOS 1804 that fails? > > > > > > -ml > > > > > > > On Tue, Aug 28, 2018 at 12:47 AM Mike Larkin <[email protected]> > > > wrote: > > > > > > > > > On Mon, Aug 27, 2018 at 04:47:31PM -0300, Fabio Almeida wrote: > > > > > > Hi, > > > > > > > > > > > > I'm running current, trying to run 4 Linux guests (to build a > > > kubernetes > > > > > > cluster), installed > > > > > > CentOS Linux release 7.5.1804 (Core) without problems. > > > > > > It appears to work fine, tried with 3G and 2G RAM each guest, my > > > machine > > > > > > has 32G of RAM. > > > > > > Changed grub to start with: clocksource=tsc console=ttyS0,115200 > > > noapic > > > > > > The machines freezes randomly, can't find a way to reproduce the > > > error. > > > > > > To start the virtual machne again, I need to "kill -9" the vmd > > > process > > > > > > attached to it (n1 is the VM name): > > > > > > -- > > > > > > hero# ps ax | grep n1 > > > > > > 60680 ?? Rp/1 22:13.56 vmd: n1 (vmd) > > > > > > hero# kill -9 60680 > > > > > > -- > > > > > > Following is a dmesg also. > > > > > > Output of vmd -dvvv: (killed by CTRL+c). > > > > > > --- > > > > > > > > > > Does the VM freeze or just the console? > > > > > > > > > > Eg, can you still ssh into the VM? > > > > > > > > > > -ml > > > > > > > > > > > vioblk_notifyq: unsupported command 0x8 > > > > > > vioblk_notifyq: unsupported command 0x8 > > > > > > vioblk_notifyq: unsupported command 0x8 > > > > > > rtc_update_rega: set non-32KHz timebase not supported > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vioblk_notifyq: unsupported command 0x8 > > > > > > vioblk_notifyq: unsupported command 0x8 > > > > > > vioblk_notifyq: unsupported command 0x8 > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > vcpu_process_com_data: guest reading com1 when not ready > > > > > > rtc_update_rega: set non-32KHz timebase not supported > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > vcpu_exit_i8253: channel 0 reset, mode=4, start=32767 > > > > > > ^Cvmd_sighdlr: handling signal > > > > > > vmd_shutdown: performing shutdown > > > > > > vm_remove: parent vmd_shutdown removing vm 1 from running config > > > > > > vm_stop: parent vmd_shutdown stopping vm 1 > > > > > > vm_remove: parent vmd_shutdown removing vm 2 from running config > > > > > > vm_stop: parent vmd_shutdown stopping vm 2 > > > > > > vm_remove: parent vmd_shutdown removing vm 3 from running config > > > > > > vm_stop: parent vmd_shutdown stopping vm 3 > > > > > > vm_remove: parent vmd_shutdown removing vm 4 from running config > > > > > > vm_stop: parent vmd_shutdown stopping vm 4 > > > > > > vm_remove: vmm vmm_shutdown removing vm 2 from running config > > > > > > priv exiting, pid 71179 > > > > > > vm_stop: vmm vmm_shutdown stopping vm 2 > > > > > > vm_remove: vmm vmm_shutdown removing vm 3 from running config > > > > > > vm_stop: vmm vmm_shutdown stopping vm 3 > > > > > > vm_remove: vmm vmm_shutdown removing vm 1 from running config > > > > > > n2: vcpu_assert_pic_irq: can't assert INTR > > > > > > n3: vcpu_assert_pic_irq: can't assert INTR > > > > > > control exiting, pid 75391 > > > > > > vm_stop: vmm vmm_shutdown stopping vm 1 > > > > > > vmm exiting, pid 83638 > > > > > > parent terminating > > > > > > --- > > > > > > dmesg: > > > > > > --- > > > > > > > > > > > > OpenBSD 6.4-beta (GENERIC.MP) #0: Fri Aug 24 15:09:55 -03 2018 > > > > > > [email protected]:/home/src/sys/arch/amd64/compile/ > GENERIC.MP > > > > > > real mem = 33833492480 (32266MB) > > > > > > avail mem = 32798904320 (31279MB) > > > > > > mpath0 at root > > > > > > scsibus0 at mpath0: 256 targets > > > > > > mainbus0 at root > > > > > > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8f11f000 (62 entries) > > > > > > bios0: vendor LENOVO version "N1QET53W (1.28 )" date 03/29/2017 > > > > > > bios0: LENOVO 20HE0000BR > > > > > > acpi0 at bios0: rev 2 > > > > > > acpi0: sleep states S0 S3 S4 S5 > > > > > > acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG > ECDT > > > > > > SSDT SSDT BOOT BATB SLIC SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 > MSDM > > > > > > DMAR ASF! FPDT UEFI > > > > > > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) > RP01(S4) > > > > > > RP02(S4) RP03(S4) RP04(S4) RP05(S4) RP06(S4) RP08(S4) RP09(S4) > > > > > > RP10(S4) RP11(S4) RP12(S4) RP13(S4) [...] > > > > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > > > > acpihpet0 at acpi0: 23999999 Hz > > > > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > > > > cpu0 at mainbus0: apid 0 (boot processor) > > > > > > cpu0: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 1252.92 MHz, > 06-8e-09 > > > > > > cpu0: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu0: 256KB 64b/line 8-way L2 cache > > > > > > cpu0: smt 0, core 0, package 0 > > > > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > > > > > cpu0: apic clock running at 23MHz > > > > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > > > > > cpu1 at mainbus0: apid 2 (application processor) > > > > > > cpu1: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 1129.03 MHz, > 06-8e-09 > > > > > > cpu1: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu1: 256KB 64b/line 8-way L2 cache > > > > > > cpu1: smt 0, core 1, package 0 > > > > > > cpu2 at mainbus0: apid 1 (application processor) > > > > > > cpu2: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 1097.44 MHz, > 06-8e-09 > > > > > > cpu2: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu2: 256KB 64b/line 8-way L2 cache > > > > > > cpu2: smt 1, core 0, package 0 > > > > > > cpu3 at mainbus0: apid 3 (application processor) > > > > > > cpu3: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 1097.44 MHz, > 06-8e-09 > > > > > > cpu3: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu3: 256KB 64b/line 8-way L2 cache > > > > > > cpu3: smt 1, core 1, package 0 > > > > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > > > > > acpimcfg0 at acpi0 > > > > > > acpimcfg0: addr 0xf0000000, bus 0-63 > > > > > > acpiec0 at acpi0 > > > > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > > > > acpiprt1 at acpi0: bus 2 (RP01) > > > > > > acpiprt2 at acpi0: bus -1 (RP02) > > > > > > acpiprt3 at acpi0: bus -1 (RP03) > > > > > > acpiprt4 at acpi0: bus -1 (RP04) > > > > > > acpiprt5 at acpi0: bus -1 (RP05) > > > > > > acpiprt6 at acpi0: bus -1 (RP06) > > > > > > acpiprt7 at acpi0: bus 4 (RP07) > > > > > > acpiprt8 at acpi0: bus -1 (RP08) > > > > > > acpiprt9 at acpi0: bus 5 (RP09) > > > > > > acpiprt10 at acpi0: bus -1 (RP10) > > > > > > acpiprt11 at acpi0: bus -1 (RP11) > > > > > > acpiprt12 at acpi0: bus -1 (RP12) > > > > > > acpiprt13 at acpi0: bus -1 (RP13) > > > > > > acpiprt14 at acpi0: bus -1 (RP14) > > > > > > acpiprt15 at acpi0: bus -1 (RP15) > > > > > > acpiprt16 at acpi0: bus -1 (RP16) > > > > > > acpiprt17 at acpi0: bus -1 (RP17) > > > > > > acpiprt18 at acpi0: bus -1 (RP18) > > > > > > acpiprt19 at acpi0: bus -1 (RP19) > > > > > > acpiprt20 at acpi0: bus -1 (RP20) > > > > > > acpiprt21 at acpi0: bus -1 (RP21) > > > > > > acpiprt22 at acpi0: bus -1 (RP22) > > > > > > acpiprt23 at acpi0: bus -1 (RP23) > > > > > > acpiprt24 at acpi0: bus -1 (RP24) > > > > > > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpipwrres0 at acpi0: PUBS, resource for XHC_ > > > > > > acpipwrres1 at acpi0: WRST > > > > > > acpipwrres2 at acpi0: WRST > > > > > > acpitz0 at acpi0: critical temperature is 128 degC > > > > > > acpithinkpad0 at acpi0 > > > > > > acpiac0 at acpi0: AC unit offline > > > > > > acpibat0 at acpi0: BAT0 model "01AV419" serial 12 type LION > oem > > > > > "SANYO" > > > > > > acpibat1 at acpi0: BAT1 model "01AV423" serial 305 type LiP oem > > > "LGC" > > > > > > acpicmos0 at acpi0 > > > > > > "INT3F0D" at acpi0 not configured > > > > > > "LEN0071" at acpi0 not configured > > > > > > "LEN006E" at acpi0 not configured > > > > > > "INT0E0C" at acpi0 not configured > > > > > > acpibtn0 at acpi0: SLPB > > > > > > "PNP0C14" at acpi0 not configured > > > > > > acpibtn1 at acpi0: LID_ > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "MSFT0101" at acpi0 not configured > > > > > > "INT3394" at acpi0 not configured > > > > > > "USBC000" at acpi0 not configured > > > > > > acpivideo0 at acpi0: GFX0 > > > > > > acpivout at acpivideo0 not configured > > > > > > cpu0: Enhanced SpeedStep 1252 MHz: speeds: 2601, 2600, 2500, > 2400, > > > > > > 2200, 2000, 1900, 1700, 1500, 1400, 1200, 1100, 800, 700, 600, > 400 > > > MHz > > > > > > pci0 at mainbus0 bus 0 > > > > > > pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02 > > > > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev > 0x02 > > > > > > drm0 at inteldrm0 > > > > > > inteldrm0: msi > > > > > > error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed > to > > > > > > load firmware i915/kbl_dmc_ver1.bin (-22) > > > > > > inteldrm0: 1366x768, 32bpp > > > > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > > > > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > > > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: > > > msi, > > > > > xHCI 1.0 > > > > > > usb0 at xhci0: USB revision 3.0 > > > > > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" > rev > > > > > > 3.00/1.00 addr 1 > > > > > > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev > > > 0x21 > > > > > > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not > > > configured > > > > > > puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x21: > > > ports: 16 > > > > > com > > > > > > com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo > > > > > > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: > > > msi, > > > > > > AHCI 1.3.1 > > > > > > ahci0: port 2: 6.0Gb/s > > > > > > scsibus1 at ahci0: 32 targets > > > > > > sd0 at scsibus1 targ 2 lun 0: <ATA, KINGSTON SUV400S, 0C3F> SCSI3 > > > > > > 0/direct fixed naa.0550380440010000 > > > > > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > > > > > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci1 at ppb0 bus 2 > > > > > > ppb1 at pci0 dev 28 function 6 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci2 at ppb1 bus 4 > > > > > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" > rev > > > > > 0x78, msi > > > > > > ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci3 at ppb2 bus 5 > > > > > > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21 > > > > > > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not > > > configured > > > > > > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev > > > 0x21: > > > > > msi > > > > > > azalia0: codecs: Realtek/0x0298, Intel/0x280b, using > Realtek/0x0298 > > > > > > audio0 at azalia0 > > > > > > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev > 0x21: > > > > > > apic 2 int 16 > > > > > > iic0 at ichiic0 > > > > > > admtemp0 at iic0 addr 0x18: Xeon > > > > > > iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=c2 06=1c 07=22 > 08=00 > > > > > > words 00=00ef 01=0000 02=0000 03=0000 04=0000 05=c210 06=1c85 > 07=2221 > > > > > > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, > address > > > > > > 64:1c:67:86:cb:e2 > > > > > > isa0 at pcib0 > > > > > > isadma0 at isa0 > > > > > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > > > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > > > > > pckbd0 at pckbc0 (kbd slot) > > > > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > > > > > pms0 at pckbc0 (aux slot) > > > > > > wsmouse0 at pms0 mux 0 > > > > > > wsmouse1 at pms0 mux 0 > > > > > > pms0: Synaptics clickpad, firmware 8.2, 0x1e2b1 0x940300 > > > > > > pcppi0 at isa0 port 0x61 > > > > > > spkr0 at pcppi0 > > > > > > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > > > > > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "AzureWave > > > > > > Integrated Camera" rev 2.00/16.20 addr 2 > > > > > > video0 at uvideo0 > > > > > > umass0 at uhub0 port 15 configuration 1 interface 0 "Generic > > > > > > USB3.0-CRW" rev 3.00/2.04 addr 3 > > > > > > umass0: using SCSI over Bulk-Only > > > > > > scsibus2 at umass0: 2 targets, initiator 0 > > > > > > sd1 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI4 > 0/direct > > > > > > removable serial.0bda0316501030900000 > > > > > > vscsi0 at root > > > > > > scsibus3 at vscsi0: 256 targets > > > > > > softraid0 at root > > > > > > scsibus4 at softraid0: 256 targets > > > > > > root on sd0a (d663eecc17ca672f.a) swap on sd0b dump on sd0b > > > > > > iwm0: hw rev 0x230, fw ver 22.361476.0, address 00:28:f8:1f:3d:4e > > > > > > acpivideo0: unknown event 0x00 > > > > > > video0 detached > > > > > > uvideo0 detached > > > > > > sd1 detached > > > > > > scsibus2 detached > > > > > > umass0 detached > > > > > > uhub0 detached > > > > > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" > rev > > > > > > 3.00/1.00 addr 1 > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > uhub1 at uhub0 port 4 configuration 1 interface 0 "ALCOR USB Hub > 2.0" > > > > > > rev 2.00/7.02 addr 2 > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev0: iclass 3/1 > > > > > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > > > > > wskbd1 at ukbd0 mux 1 > > > > > > wskbd1: connecting to wsdisplay0 > > > > > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev1: iclass 3/1 > > > > > > ums0 at uhidev1: 5 buttons, Z and W dir > > > > > > wsmouse2 at ums0 mux 0 > > > > > > uhidev2 at uhub1 port 1 configuration 1 interface 2 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev2: iclass 3/0, 1 report id > > > > > > uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0 > > > > > > uhidev3 at uhub1 port 1 configuration 1 interface 3 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev3: iclass 3/0, 1 report id > > > > > > uhid1 at uhidev3 reportid 1: input=3, output=0, feature=0 > > > > > > uhidev4 at uhub1 port 2 configuration 1 interface 0 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev4: iclass 3/1 > > > > > > ukbd1 at uhidev4: 8 variable keys, 0 key codes > > > > > > wskbd2 at ukbd1 mux 1 > > > > > > wskbd2: connecting to wsdisplay0 > > > > > > uhidev5 at uhub1 port 2 configuration 1 interface 1 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev5: iclass 3/1 > > > > > > ums1 at uhidev5: 5 buttons, Z and W dir > > > > > > wsmouse3 at ums1 mux 0 > > > > > > uhidev6 at uhub1 port 2 configuration 1 interface 2 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev6: iclass 3/0, 5 report ids > > > > > > uhid2 at uhidev6 reportid 1: input=3, output=0, feature=0 > > > > > > uhid3 at uhidev6 reportid 2: input=2, output=0, feature=0 > > > > > > uhid4 at uhidev6 reportid 3: input=3, output=0, feature=0 > > > > > > uhid5 at uhidev6 reportid 5: input=0, output=0, feature=7 > > > > > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "AzureWave > > > > > > Integrated Camera" rev 2.00/16.20 addr 5 > > > > > > video0 at uvideo0 > > > > > > umass0 at uhub0 port 13 configuration 1 interface 0 "Generic > > > External" > > > > > > rev 3.00/2.05 addr 6 > > > > > > umass0: using SCSI over Bulk-Only > > > > > > scsibus2 at umass0: 2 targets, initiator 0 > > > > > > sd1 at scsibus2 targ 1 lun 0: <Generic, External, 0205> SCSI4 > > > 0/direct > > > > > > fixed serial.13fd3920534B20202020 > > > > > > sd1: 476940MB, 512 bytes/sector, 976773167 sectors > > > > > > umass1 at uhub0 port 15 configuration 1 interface 0 "Generic > > > > > > USB3.0-CRW" rev 3.00/2.04 addr 7 > > > > > > umass1: using SCSI over Bulk-Only > > > > > > scsibus5 at umass1: 2 targets, initiator 0 > > > > > > sd2 at scsibus5 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI4 > 0/direct > > > > > > removable serial.0bda0316501030900000 > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > syncing disks... done > > > > > > reboot > > > > > > OpenBSD 6.4-beta (GENERIC.MP) #0: Fri Aug 24 15:09:55 -03 2018 > > > > > > [email protected]:/home/src/sys/arch/amd64/compile/ > GENERIC.MP > > > > > > real mem = 33833492480 (32266MB) > > > > > > avail mem = 32798908416 (31279MB) > > > > > > mpath0 at root > > > > > > scsibus0 at mpath0: 256 targets > > > > > > mainbus0 at root > > > > > > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8f11f000 (62 entries) > > > > > > bios0: vendor LENOVO version "N1QET53W (1.28 )" date 03/29/2017 > > > > > > bios0: LENOVO 20HE0000BR > > > > > > acpi0 at bios0: rev 2 > > > > > > acpi0: sleep states S0 S3 S4 S5 > > > > > > acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG > ECDT > > > > > > SSDT SSDT BOOT BATB SLIC SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 > MSDM > > > > > > DMAR ASF! FPDT UEFI > > > > > > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) > RP01(S4) > > > > > > RP02(S4) RP03(S4) RP04(S4) RP05(S4) RP06(S4) RP08(S4) RP09(S4) > > > > > > RP10(S4) RP11(S4) RP12(S4) RP13(S4) [...] > > > > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > > > > acpihpet0 at acpi0: 23999999 Hz > > > > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > > > > cpu0 at mainbus0: apid 0 (boot processor) > > > > > > cpu0: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 2466.07 MHz, > 06-8e-09 > > > > > > cpu0: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu0: 256KB 64b/line 8-way L2 cache > > > > > > cpu0: smt 0, core 0, package 0 > > > > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > > > > > cpu0: apic clock running at 24MHz > > > > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > > > > > cpu1 at mainbus0: apid 2 (application processor) > > > > > > cpu1: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 2494.19 MHz, > 06-8e-09 > > > > > > cpu1: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu1: 256KB 64b/line 8-way L2 cache > > > > > > cpu1: smt 0, core 1, package 0 > > > > > > cpu2 at mainbus0: apid 1 (application processor) > > > > > > cpu2: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 2494.19 MHz, > 06-8e-09 > > > > > > cpu2: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu2: 256KB 64b/line 8-way L2 cache > > > > > > cpu2: smt 1, core 0, package 0 > > > > > > cpu3 at mainbus0: apid 3 (application processor) > > > > > > cpu3: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 2494.19 MHz, > 06-8e-09 > > > > > > cpu3: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu3: 256KB 64b/line 8-way L2 cache > > > > > > cpu3: smt 1, core 1, package 0 > > > > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > > > > > acpimcfg0 at acpi0 > > > > > > acpimcfg0: addr 0xf0000000, bus 0-63 > > > > > > acpiec0 at acpi0 > > > > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > > > > acpiprt1 at acpi0: bus 2 (RP01) > > > > > > acpiprt2 at acpi0: bus -1 (RP02) > > > > > > acpiprt3 at acpi0: bus -1 (RP03) > > > > > > acpiprt4 at acpi0: bus -1 (RP04) > > > > > > acpiprt5 at acpi0: bus -1 (RP05) > > > > > > acpiprt6 at acpi0: bus -1 (RP06) > > > > > > acpiprt7 at acpi0: bus 4 (RP07) > > > > > > acpiprt8 at acpi0: bus -1 (RP08) > > > > > > acpiprt9 at acpi0: bus 5 (RP09) > > > > > > acpiprt10 at acpi0: bus -1 (RP10) > > > > > > acpiprt11 at acpi0: bus -1 (RP11) > > > > > > acpiprt12 at acpi0: bus -1 (RP12) > > > > > > acpiprt13 at acpi0: bus -1 (RP13) > > > > > > acpiprt14 at acpi0: bus -1 (RP14) > > > > > > acpiprt15 at acpi0: bus -1 (RP15) > > > > > > acpiprt16 at acpi0: bus -1 (RP16) > > > > > > acpiprt17 at acpi0: bus -1 (RP17) > > > > > > acpiprt18 at acpi0: bus -1 (RP18) > > > > > > acpiprt19 at acpi0: bus -1 (RP19) > > > > > > acpiprt20 at acpi0: bus -1 (RP20) > > > > > > acpiprt21 at acpi0: bus -1 (RP21) > > > > > > acpiprt22 at acpi0: bus -1 (RP22) > > > > > > acpiprt23 at acpi0: bus -1 (RP23) > > > > > > acpiprt24 at acpi0: bus -1 (RP24) > > > > > > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpipwrres0 at acpi0: PUBS, resource for XHC_ > > > > > > acpipwrres1 at acpi0: WRST > > > > > > acpipwrres2 at acpi0: WRST > > > > > > acpitz0 at acpi0: critical temperature is 128 degC > > > > > > acpithinkpad0 at acpi0 > > > > > > acpiac0 at acpi0: AC unit online > > > > > > acpibat0 at acpi0: BAT0 model "01AV419" serial 12 type LION > oem > > > > > "SANYO" > > > > > > acpibat1 at acpi0: BAT1 model "01AV423" serial 305 type LiP oem > > > "LGC" > > > > > > acpicmos0 at acpi0 > > > > > > "INT3F0D" at acpi0 not configured > > > > > > "LEN0071" at acpi0 not configured > > > > > > "LEN006E" at acpi0 not configured > > > > > > "INT0E0C" at acpi0 not configured > > > > > > acpibtn0 at acpi0: SLPB > > > > > > "PNP0C14" at acpi0 not configured > > > > > > acpibtn1 at acpi0: LID_ > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "MSFT0101" at acpi0 not configured > > > > > > "INT3394" at acpi0 not configured > > > > > > "USBC000" at acpi0 not configured > > > > > > acpivideo0 at acpi0: GFX0 > > > > > > acpivout at acpivideo0 not configured > > > > > > cpu0: Enhanced SpeedStep 2466 MHz: speeds: 2601, 2600, 2500, > 2400, > > > > > > 2200, 2000, 1900, 1700, 1500, 1400, 1200, 1100, 800, 700, 600, > 400 > > > MHz > > > > > > pci0 at mainbus0 bus 0 > > > > > > pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02 > > > > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev > 0x02 > > > > > > drm0 at inteldrm0 > > > > > > inteldrm0: msi > > > > > > error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed > to > > > > > > load firmware i915/kbl_dmc_ver1.bin (-22) > > > > > > inteldrm0: 1366x768, 32bpp > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > > > > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > > > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: > > > msi, > > > > > xHCI 1.0 > > > > > > usb0 at xhci0: USB revision 3.0 > > > > > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" > rev > > > > > > 3.00/1.00 addr 1 > > > > > > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev > > > 0x21 > > > > > > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not > > > configured > > > > > > puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x21: > > > ports: 16 > > > > > com > > > > > > com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo > > > > > > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: > > > msi, > > > > > > AHCI 1.3.1 > > > > > > ahci0: port 2: 6.0Gb/s > > > > > > scsibus1 at ahci0: 32 targets > > > > > > sd0 at scsibus1 targ 2 lun 0: <ATA, KINGSTON SUV400S, 0C3F> SCSI3 > > > > > > 0/direct fixed naa.0550380440010000 > > > > > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > > > > > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci1 at ppb0 bus 2 > > > > > > ppb1 at pci0 dev 28 function 6 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci2 at ppb1 bus 4 > > > > > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" > rev > > > > > 0x78, msi > > > > > > ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci3 at ppb2 bus 5 > > > > > > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21 > > > > > > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not > > > configured > > > > > > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev > > > 0x21: > > > > > msi > > > > > > azalia0: codecs: Realtek/0x0298, Intel/0x280b, using > Realtek/0x0298 > > > > > > audio0 at azalia0 > > > > > > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev > 0x21: > > > > > > apic 2 int 16 > > > > > > iic0 at ichiic0 > > > > > > admtemp0 at iic0 addr 0x18: Xeon > > > > > > iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=c1 06=1c 07=22 > 08=00 > > > > > > words 00=00ef 01=0000 02=0000 03=0000 04=0000 05=c1b8 06=1c85 > 07=2221 > > > > > > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, > address > > > > > > 64:1c:67:86:cb:e2 > > > > > > isa0 at pcib0 > > > > > > isadma0 at isa0 > > > > > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > > > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > > > > > pckbd0 at pckbc0 (kbd slot) > > > > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > > > > > pms0 at pckbc0 (aux slot) > > > > > > wsmouse0 at pms0 mux 0 > > > > > > wsmouse1 at pms0 mux 0 > > > > > > pms0: Synaptics clickpad, firmware 8.2, 0x1e2b1 0x940300 > > > > > > pcppi0 at isa0 port 0x61 > > > > > > spkr0 at pcppi0 > > > > > > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > > > > > > uhub1 at uhub0 port 4 configuration 1 interface 0 "ALCOR USB Hub > 2.0" > > > > > > rev 2.00/7.02 addr 2 > > > > > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev0: iclass 3/1 > > > > > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > > > > > wskbd1 at ukbd0 mux 1 > > > > > > wskbd1: connecting to wsdisplay0 > > > > > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev1: iclass 3/1 > > > > > > ums0 at uhidev1: 5 buttons, Z and W dir > > > > > > wsmouse2 at ums0 mux 0 > > > > > > uhidev2 at uhub1 port 1 configuration 1 interface 2 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev2: iclass 3/0, 1 report id > > > > > > uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0 > > > > > > uhidev3 at uhub1 port 1 configuration 1 interface 3 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev3: iclass 3/0, 1 report id > > > > > > uhid1 at uhidev3 reportid 1: input=3, output=0, feature=0 > > > > > > uhidev4 at uhub1 port 2 configuration 1 interface 0 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev4: iclass 3/1 > > > > > > ukbd1 at uhidev4: 8 variable keys, 0 key codes > > > > > > wskbd2 at ukbd1 mux 1 > > > > > > wskbd2: connecting to wsdisplay0 > > > > > > uhidev5 at uhub1 port 2 configuration 1 interface 1 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev5: iclass 3/1 > > > > > > ums1 at uhidev5: 5 buttons, Z and W dir > > > > > > wsmouse3 at ums1 mux 0 > > > > > > uhidev6 at uhub1 port 2 configuration 1 interface 2 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev6: iclass 3/0, 5 report ids > > > > > > uhid2 at uhidev6 reportid 1: input=3, output=0, feature=0 > > > > > > uhid3 at uhidev6 reportid 2: input=2, output=0, feature=0 > > > > > > uhid4 at uhidev6 reportid 3: input=3, output=0, feature=0 > > > > > > uhid5 at uhidev6 reportid 5: input=0, output=0, feature=7 > > > > > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "AzureWave > > > > > > Integrated Camera" rev 2.00/16.20 addr 5 > > > > > > video0 at uvideo0 > > > > > > umass0 at uhub0 port 13 configuration 1 interface 0 "Generic > > > External" > > > > > > rev 3.00/2.05 addr 6 > > > > > > umass0: using SCSI over Bulk-Only > > > > > > scsibus2 at umass0: 2 targets, initiator 0 > > > > > > sd1 at scsibus2 targ 1 lun 0: <Generic, External, 0205> SCSI4 > > > 0/direct > > > > > > fixed serial.13fd3920534B20202020 > > > > > > sd1: 476940MB, 512 bytes/sector, 976773167 sectors > > > > > > umass1 at uhub0 port 15 configuration 1 interface 0 "Generic > > > > > > USB3.0-CRW" rev 3.00/2.04 addr 7 > > > > > > umass1: using SCSI over Bulk-Only > > > > > > scsibus3 at umass1: 2 targets, initiator 0 > > > > > > sd2 at scsibus3 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI4 > 0/direct > > > > > > removable serial.0bda0316501030900000 > > > > > > vscsi0 at root > > > > > > scsibus4 at vscsi0: 256 targets > > > > > > softraid0 at root > > > > > > scsibus5 at softraid0: 256 targets > > > > > > root on sd0a (d663eecc17ca672f.a) swap on sd0b dump on sd0b > > > > > > iwm0: hw rev 0x230, fw ver 22.361476.0, address 00:28:f8:1f:3d:4e > > > > > > iridium[90999]: pledge "rpath", syscall 5 > > > > > > iridium[72763]: pledge "rpath", syscall 5 > > > > > > iridium[33566]: pledge "rpath", syscall 5 > > > > > > iridium[33566]: pledge "stdio", syscall 72 > > > > > > iridium[24537]: pledge "rpath", syscall 5 > > > > > > iridium[29041]: pledge "rpath", syscall 5 > > > > > > iridium[33825]: pledge "rpath", syscall 5 > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > error: [drm:pid24964:intel_pipe_update_start] *ERROR* Potential > > > atomic > > > > > > update failure on pipe B > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > syncing disks... done > > > > > > reboo > > > > > > OpenBSD 6.4-beta (GENERIC.MP) #0: Mon Aug 27 11:30:14 -03 2018 > > > > > > [email protected]:/home/src/sys/arch/amd64/compile/ > GENERIC.MP > > > > > > real mem = 33833492480 (32266MB) > > > > > > avail mem = 32798900224 (31279MB) > > > > > > mpath0 at root > > > > > > scsibus0 at mpath0: 256 targets > > > > > > mainbus0 at root > > > > > > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8f11f000 (62 entries) > > > > > > bios0: vendor LENOVO version "N1QET53W (1.28 )" date 03/29/2017 > > > > > > bios0: LENOVO 20HE0000BR > > > > > > acpi0 at bios0: rev 2 > > > > > > acpi0: sleep states S0 S3 S4 S5 > > > > > > acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG > ECDT > > > > > > SSDT SSDT BOOT BATB SLIC SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 > MSDM > > > > > > DMAR ASF! FPDT UEFI > > > > > > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) > RP01(S4) > > > > > > RP02(S4) RP03(S4) RP04(S4) RP05(S4) RP06(S4) RP08(S4) RP09(S4) > > > > > > RP10(S4) RP11(S4) RP12(S4) RP13(S4) [...] > > > > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > > > > acpihpet0 at acpi0: 23999999 Hz > > > > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > > > > cpu0 at mainbus0: apid 0 (boot processor) > > > > > > cpu0: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 2469.41 MHz, > 06-8e-09 > > > > > > cpu0: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu0: 256KB 64b/line 8-way L2 cache > > > > > > cpu0: smt 0, core 0, package 0 > > > > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > > > > > cpu0: apic clock running at 24MHz > > > > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > > > > > cpu1 at mainbus0: apid 2 (application processor) > > > > > > cpu1: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 2494.19 MHz, > 06-8e-09 > > > > > > cpu1: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu1: 256KB 64b/line 8-way L2 cache > > > > > > cpu1: smt 0, core 1, package 0 > > > > > > cpu2 at mainbus0: apid 1 (application processor) > > > > > > cpu2: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 2494.19 MHz, > 06-8e-09 > > > > > > cpu2: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu2: 256KB 64b/line 8-way L2 cache > > > > > > cpu2: smt 1, core 0, package 0 > > > > > > cpu3 at mainbus0: apid 3 (application processor) > > > > > > cpu3: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz, 2494.19 MHz, > 06-8e-09 > > > > > > cpu3: > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > > > > > cpu3: 256KB 64b/line 8-way L2 cache > > > > > > cpu3: smt 1, core 1, package 0 > > > > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > > > > > acpimcfg0 at acpi0 > > > > > > acpimcfg0: addr 0xf0000000, bus 0-63 > > > > > > acpiec0 at acpi0 > > > > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > > > > acpiprt1 at acpi0: bus 2 (RP01) > > > > > > acpiprt2 at acpi0: bus -1 (RP02) > > > > > > acpiprt3 at acpi0: bus -1 (RP03) > > > > > > acpiprt4 at acpi0: bus -1 (RP04) > > > > > > acpiprt5 at acpi0: bus -1 (RP05) > > > > > > acpiprt6 at acpi0: bus -1 (RP06) > > > > > > acpiprt7 at acpi0: bus 4 (RP07) > > > > > > acpiprt8 at acpi0: bus -1 (RP08) > > > > > > acpiprt9 at acpi0: bus 5 (RP09) > > > > > > acpiprt10 at acpi0: bus -1 (RP10) > > > > > > acpiprt11 at acpi0: bus -1 (RP11) > > > > > > acpiprt12 at acpi0: bus -1 (RP12) > > > > > > acpiprt13 at acpi0: bus -1 (RP13) > > > > > > acpiprt14 at acpi0: bus -1 (RP14) > > > > > > acpiprt15 at acpi0: bus -1 (RP15) > > > > > > acpiprt16 at acpi0: bus -1 (RP16) > > > > > > acpiprt17 at acpi0: bus -1 (RP17) > > > > > > acpiprt18 at acpi0: bus -1 (RP18) > > > > > > acpiprt19 at acpi0: bus -1 (RP19) > > > > > > acpiprt20 at acpi0: bus -1 (RP20) > > > > > > acpiprt21 at acpi0: bus -1 (RP21) > > > > > > acpiprt22 at acpi0: bus -1 (RP22) > > > > > > acpiprt23 at acpi0: bus -1 (RP23) > > > > > > acpiprt24 at acpi0: bus -1 (RP24) > > > > > > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > > > > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > > > > > acpipwrres0 at acpi0: PUBS, resource for XHC_ > > > > > > acpipwrres1 at acpi0: WRST > > > > > > acpipwrres2 at acpi0: WRST > > > > > > acpitz0 at acpi0: critical temperature is 128 degC > > > > > > acpithinkpad0 at acpi0 > > > > > > acpiac0 at acpi0: AC unit online > > > > > > acpibat0 at acpi0: BAT0 model "01AV419" serial 12 type LION > oem > > > > > "SANYO" > > > > > > acpibat1 at acpi0: BAT1 model "01AV423" serial 305 type LiP oem > > > "LGC" > > > > > > acpicmos0 at acpi0 > > > > > > "INT0E0C" at acpi0 not configured > > > > > > acpibtn0 at acpi0: SLPB > > > > > > "PNP0C14" at acpi0 not configured > > > > > > acpibtn1 at acpi0: LID_ > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "PNP0C14" at acpi0 not configured > > > > > > "MSFT0101" at acpi0 not configured > > > > > > "USBC000" at acpi0 not configured > > > > > > acpivideo0 at acpi0: GFX0 > > > > > > acpivout at acpivideo0 not configured > > > > > > cpu0: Enhanced SpeedStep 2469 MHz: speeds: 2601, 2600, 2500, > 2400, > > > > > > 2200, 2000, 1900, 1700, 1500, 1400, 1200, 1100, 800, 700, 600, > 400 > > > MHz > > > > > > pci0 at mainbus0 bus 0 > > > > > > pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02 > > > > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev > 0x02 > > > > > > drm0 at inteldrm0 > > > > > > inteldrm0: msi > > > > > > error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed > to > > > > > > load firmware i915/kbl_dmc_ver1.bin (-22) > > > > > > inteldrm0: 1366x768, 32bpp > > > > > > WARNING !wm_changed failed at > > > > > /home/src/sys/dev/pci/drm/i915/intel_pm.c:3609 > > > > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > > > > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > > > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: > > > msi, > > > > > xHCI 1.0 > > > > > > usb0 at xhci0: USB revision 3.0 > > > > > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" > rev > > > > > > 3.00/1.00 addr 1 > > > > > > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev > > > 0x21 > > > > > > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not > > > configured > > > > > > puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x21: > > > ports: 16 > > > > > com > > > > > > com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo > > > > > > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: > > > msi, > > > > > > AHCI 1.3.1 > > > > > > ahci0: port 2: 6.0Gb/s > > > > > > scsibus1 at ahci0: 32 targets > > > > > > sd0 at scsibus1 targ 2 lun 0: <ATA, KINGSTON SUV400S, 0C3F> SCSI3 > > > > > > 0/direct fixed naa.0550380440010000 > > > > > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > > > > > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci1 at ppb0 bus 2 > > > > > > ppb1 at pci0 dev 28 function 6 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci2 at ppb1 bus 4 > > > > > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" > rev > > > > > 0x78, msi > > > > > > ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: > msi > > > > > > pci3 at ppb2 bus 5 > > > > > > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21 > > > > > > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not > > > configured > > > > > > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev > > > 0x21: > > > > > msi > > > > > > azalia0: codecs: Realtek/0x0298, Intel/0x280b, using > Realtek/0x0298 > > > > > > audio0 at azalia0 > > > > > > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev > 0x21: > > > > > > apic 2 int 16 > > > > > > iic0 at ichiic0 > > > > > > admtemp0 at iic0 addr 0x18: Xeon > > > > > > iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=c2 06=1c 07=22 > 08=00 > > > > > > words 00=00ef 01=0000 02=0000 03=0000 04=0000 05=c204 06=1c85 > 07=2221 > > > > > > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, > address > > > > > > 64:1c:67:86:cb:e2 > > > > > > isa0 at pcib0 > > > > > > isadma0 at isa0 > > > > > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > > > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > > > > > pckbd0 at pckbc0 (kbd slot) > > > > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > > > > > pms0 at pckbc0 (aux slot) > > > > > > wsmouse0 at pms0 mux 0 > > > > > > wsmouse1 at pms0 mux 0 > > > > > > pms0: Synaptics clickpad, firmware 8.2, 0x1e2b1 0x940300 > > > > > > pcppi0 at isa0 port 0x61 > > > > > > spkr0 at pcppi0 > > > > > > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > > > > > > uhub1 at uhub0 port 4 configuration 1 interface 0 "ALCOR USB Hub > 2.0" > > > > > > rev 2.00/7.02 addr 2 > > > > > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev0: iclass 3/1 > > > > > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > > > > > wskbd1 at ukbd0 mux 1 > > > > > > wskbd1: connecting to wsdisplay0 > > > > > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev1: iclass 3/1 > > > > > > ums0 at uhidev1: 5 buttons, Z and W dir > > > > > > wsmouse2 at ums0 mux 0 > > > > > > uhidev2 at uhub1 port 1 configuration 1 interface 2 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev2: iclass 3/0, 1 report id > > > > > > uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0 > > > > > > uhidev3 at uhub1 port 1 configuration 1 interface 3 "Lenovo > Lenovo > > > > > > Essential Wireless Keyboard and Mouse Combo" rev 2.00/1.08 addr 3 > > > > > > uhidev3: iclass 3/0, 1 report id > > > > > > uhid1 at uhidev3 reportid 1: input=3, output=0, feature=0 > > > > > > uhidev4 at uhub1 port 2 configuration 1 interface 0 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev4: iclass 3/1 > > > > > > ukbd1 at uhidev4: 8 variable keys, 0 key codes > > > > > > wskbd2 at ukbd1 mux 1 > > > > > > wskbd2: connecting to wsdisplay0 > > > > > > uhidev5 at uhub1 port 2 configuration 1 interface 1 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev5: iclass 3/1 > > > > > > ums1 at uhidev5: 5 buttons, Z and W dir > > > > > > wsmouse3 at ums1 mux 0 > > > > > > uhidev6 at uhub1 port 2 configuration 1 interface 2 "Lenovo > Lenovo > > > USB > > > > > > Receiver" rev 2.00/1.22 addr 4 > > > > > > uhidev6: iclass 3/0, 5 report ids > > > > > > uhid2 at uhidev6 reportid 1: input=3, output=0, feature=0 > > > > > > uhid3 at uhidev6 reportid 2: input=2, output=0, feature=0 > > > > > > uhid4 at uhidev6 reportid 3: input=3, output=0, feature=0 > > > > > > uhid5 at uhidev6 reportid 5: input=0, output=0, feature=7 > > > > > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "AzureWave > > > > > > Integrated Camera" rev 2.00/16.20 addr 5 > > > > > > video0 at uvideo0 > > > > > > umass0 at uhub0 port 13 configuration 1 interface 0 "Generic > > > External" > > > > > > rev 3.00/2.05 addr 6 > > > > > > umass0: using SCSI over Bulk-Only > > > > > > scsibus2 at umass0: 2 targets, initiator 0 > > > > > > sd1 at scsibus2 targ 1 lun 0: <Generic, External, 0205> SCSI4 > > > 0/direct > > > > > > fixed serial.13fd3920534B20202020 > > > > > > sd1: 476940MB, 512 bytes/sector, 976773167 sectors > > > > > > umass1 at uhub0 port 15 configuration 1 interface 0 "Generic > > > > > > USB3.0-CRW" rev 3.00/2.04 addr 7 > > > > > > umass1: using SCSI over Bulk-Only > > > > > > scsibus3 at umass1: 2 targets, initiator 0 > > > > > > sd2 at scsibus3 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI4 > 0/direct > > > > > > removable serial.0bda0316501030900000 > > > > > > vscsi0 at root > > > > > > scsibus4 at vscsi0: 256 targets > > > > > > softraid0 at root > > > > > > scsibus5 at softraid0: 256 targets > > > > > > root on sd0a (d663eecc17ca672f.a) swap on sd0b dump on sd0b > > > > > > iwm0: hw rev 0x230, fw ver 22.361476.0, address 00:28:f8:1f:3d:4e > > > > > > > > > > > > --- > > > > > > > > >
