> > On Sep 8, 2018 11:27 AM, Jay Hart <[email protected]> wrote: >> >> Hello, >> >> My new router crashed this morning. About 4-5 days ago I ran 'syspatch' >> and think that 14, 15, >> and 16 patches were installed. At the conclusion of the install, the kernel >> "relinked". No >> issues >> reported. I did not reboot the box. >> >> Today, while trying to combat that duplicate IP address issue, I rebooted >> the box, Upon startup >> it >> dropped into the debugger. Did another reboot just to see if that was a >> one-off, but it dropped >> into the debugger again. >> >> Standard 6.3 release machine. Not following current or snapshots... >> >> I've attached a pic below of the screen. Its all I've got right now. I >> have to disable >> inteldrm >> to get the box to boot [normally]. I have an old thread about that. >> >> www.kevla.org/6.3crash.jpg >> >> Any suggestions or processes to try? I've never been in this boat, no idea >> what to do... >> >> Thanks, >> >> Jay >> > > Maybe you can boot single user and try syspatch -R. > > boot> boot -s > > # syspatch -R > # reboot > > If that fixes it you could then possibly apply one patch at a time via source > until you find what > hosed it and report that to tech@. > >
I tried that. Same thing, gets to the line shown in my original email pic, and drops down into the debugger. Jay
