Re: Black screen when starting Xorg with Dell XPS 13 9350

Noth Sat, 13 Apr 2019 07:50:37 -0700

Hello again,

I updated to the latest snapshot and now Xorg works! But it has acaveat, the pointer device detected is the touchscreen not the touchpad.It's assigned device wsmouse0 and ums1 doesn't seem to recognize thetouchpad anymore so no wsmouse1. I've tested this on the XPS 13 9350 andmy new 9370. Same results on both (do make sure you have the latestfirmware installed via fw_update).


Cheers,

Noth

On 03/03/2019 04:31, Bryan Avery wrote:

Thanks for the help, Fred. Unfortunately, I'm still getting a black
screen. I didn't previously have a ~/.xsession, but I created one with
the following contents:

export LANG=en_US.UTF-8
export ENV=$HOME/.kshrc
xrdb -merge $HOME/.Xresources
xsetroot -solid dimgray
xidle &
LANG= xclock -strftime "%a %e %b %Y %H:%M" &
xset b off
setxkbmap -option ctrl:nocaps
exec cwm

I also removed machdep.allowaperture=1 from /etc/sysctl.conf. When I
booted with this configuration, I got a black screen and the
Xorg.0.log gave:

[    13.242] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[    13.242] linear framebuffer access unavailable
[    13.312] (--) Using wscons driver on /dev/ttyC4
[    13.370]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    13.370] X Protocol Version 11, Revision 0
[    13.370] Build Operating System: OpenBSD 6.4 amd64
[    13.370] Current Operating System: OpenBSD c12h17n2o4p.my.domain
6.4 GENERIC.MP#7 amd64
[    13.370] Build Date: 25 October 2018  11:39:05PM
[    13.370]
[    13.370] Current version of pixman: 0.34.0
[    13.370] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    13.370] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.370] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar  2
19:00:38 2019
[    13.372] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.373] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[    13.374] (==) No Layout section.  Using the first Screen section.
[    13.374] (==) No screen section available. Using defaults.
[    13.374] (**) |-->Screen "Default Screen Section" (0)
[    13.374] (**) |   |-->Monitor "<default monitor>"
[    13.375] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[    13.375] (**) |   |-->Device "drm"
[    13.375] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    13.375] (==) Automatically adding devices
[    13.375] (==) Automatically enabling devices
[    13.375] (==) Not automatically adding GPU devices
[    13.375] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    13.382] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[    13.382] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    13.383] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    13.383] (II) Loader magic: 0x35f44c71000
[    13.383] (II) Module ABI versions:
[    13.383] X.Org ANSI C Emulation: 0.4
[    13.383] X.Org Video Driver: 23.0
[    13.383] X.Org XInput driver : 24.1
[    13.383] X.Org Server Extension : 10.0
[    13.383] (--) PCI:*(0:0:2:0) 8086:1916:1028:0704 rev 7, Mem @
0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64
[    13.383] (II) LoadModule: "glx"
[    13.386] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    13.400] (II) Module glx: vendor="X.Org Foundation"
[    13.400] compiled for 1.19.6, module version = 1.0.0
[    13.400] ABI class: X.Org Server Extension, version 10.0
[    13.400] (II) LoadModule: "intel"
[    13.400] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[    13.405] (II) Module intel: vendor="X.Org Foundation"
[    13.405] compiled for 1.19.6, module version = 2.99.916
[    13.405] Module class: X.Org Video Driver
[    13.405] ABI class: X.Org Video Driver, version 23.0
[    13.405] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    13.406] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    13.406] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    13.406] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics:
5200, 6200, P6300
[    13.408] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20151010
[    13.410] (WW) intel(0): Unknown chipset
[    13.410] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
sse4.2, avx, avx2
[    13.410] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    13.410] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    13.410] (==) intel(0): RGB weight 888
[    13.410] (==) intel(0): Default visual is TrueColor
[    13.411] (**) intel(0): Option "TearFree" "true"

Reinstating machdep.allowaperature=1 to /etc/sysctl.conf and rebooting
(with the above ~/.xsession) yielded the same black screen and
Xorg.0.log as originally. The backlight is on, the screen is just
black. I tried toggling the function keys for keyboard brightness,
backlight, and internal/external monitor but these didn't produce any
change.

On Sat, Mar 2, 2019 at 4:01 PM Fred Crowson <fred.crow...@gmail.com> wrote:

do you have an .xsession file in your /home/ directory?

machdep.allowaperture=1 should not be needed for xenodm to work...

I once had a similar issue where the X server would start with a black
screen until I toggled either the keyboard brightness setting or the
keyboard shortcut for internal / external monitor.

hth

Fred

On Sat, 2 Mar 2019 at 23:13, Bryan Avery <wingnut...@gmail.com> wrote:

I have been unable to start X with a new install of OpenBSD on my
laptop. I am a beginner with OpenBSD. This is a Skylake laptop with
Intel 520 QHD graphics. During boot, the console shows with underscan,
then the resolution increases (but is still less than native), then
goes black upon starting Xorg. If I disable xenodm, the console is
visible and I am able to login on the laptop. The first time I enabled
and started xenodm, the screen went black. I was able to connect
through SSH and retrieve the Xorg.0.log which told me to add
machdep.allowaperture=1 to /etc/sysctl.conf which I did, but the
screen went black again after I rebooted. I am not able to understand
what went wrong from looking at the dmesg and Xorg.0.log. I have
tested this with and without a config in /etc/X11/xorg.conf.d and get
the same result. I am currently using /etc/X11/xorg.conf.d/intel.conf
with contents:

Section "Device"
   Identifier "drm"
   Driver "intel"
   Option "TearFree" "true"
EndSection

dmesg:

OpenBSD 6.4 (GENERIC.MP) #7: Thu Feb 28 18:56:25 CET 2019
     
r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8433565696 (8042MB)
avail mem = 8168701952 (7790MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe0000 (94 entries)
bios0: vendor Dell Inc. version "1.9.0" date 08/31/2018
bios0: Dell Inc. XPS 13 9350
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT LPIT SSDT SSDT
SSDT DBGP DBG2 SSDT BOOT SSDT UEFI SSDT MSDM SSDT SLIC TCPA DMAR BGRT
ASF!
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4)
PEG2(S4) PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4)
PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2295.40 MHz, 06-4e-03
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2294.66 MHz, 06-4e-03
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2294.65 MHz, 06-4e-03
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2294.65 MHz, 06-4e-03
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 60 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus 58 (RP05)
acpiprt14 at acpi0: bus 59 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP14)
acpiprt22 at acpi0: bus -1 (RP15)
acpiprt23 at acpi0: bus -1 (RP16)
acpiec0 at acpi0
acpiec at acpi0 not configured
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 107 degC
acpipwrres23 at acpi0: FN00, resource for FAN0
acpipwrres24 at acpi0: FN01, resource for FAN1
acpipwrres25 at acpi0: FN02, resource for FAN2
acpipwrres26 at acpi0: FN03, resource for FAN3
acpipwrres27 at acpi0: FN04, resource for FAN4
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 105 degC
acpicmos0 at acpi0
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT344B" at acpi0 not configured
"XXXX0000" at acpi0 not configured
"INT3403" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
tpm0 at acpi0: TPM_ addr 0xfed40000/0x1000: WEC WPCT200 rev 0x2
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL JHXPY53" serial 2403 type LiP oem "SMP"
"INT3400" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2301, 2300, 2200, 2100,
2000, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to
load firmware i915/skl_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC,
error -8 (ignored)
inteldrm0: 3200x1800, 32bpp
error: [drm:pid0:intel_dp_link_training_channel_equalization] *ERROR*
5.4 Gbps link rate without HBR2/TPS3 support
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
dwiic0 at pci0 dev 21 function 0 "Intel 100 Series I2C" rev 0x21: apic 2 int 16
iic0 at dwiic0
dwiic1 at pci0 dev 21 function 1 "Intel 100 Series I2C" rev 0x21: apic 2 int 17
iic1 at dwiic1
ihidev0 at iic1 addr 0x2cdwiic1: timed out reading remaining 29
, failed fetching initial HID descriptor
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
AHCI 1.3.1
scsibus1 at ahci0: 32 targets
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 58
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x50, msi
ppb2 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 59
rtsx0 at pci3 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 60
nvme0 at pci4 dev 0 function 0 "Samsung SM951/PM951 NVMe" rev 0x01:
msi, NVMe 1.1
nvme0: PM951 NVMe SAMSUNG 256GB, firmware BXV77D0Q, serial S29NNXAG983405
scsibus2 at nvme0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <NVMe, PM951 NVMe SAMSU, BXV7> SCSI4
0/direct fixed
sd0: 244198MB, 512 bytes/sector, 500118192 sectors
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0256, Intel/0x2809, using Realtek/0x0256
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic2 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uvideo0 at uhub0 port 5 configuration 1 interface 0
"CKFEH41I373010011222 Integrated_Webcam_HD" rev 2.01/48.14 addr 2
video0 at uvideo0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd1 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 182438MB, 512 bytes/sector, 373634544 sectors
root on sd1a (7a9a5283d2185467.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x230, fw ver 22.361476.0, address 34:13:e8:58:c0:46

Xorg.0.log:

[    13.360] (--) checkDevMem: using aperture driver /dev/xf86
[    13.430] (--) Using wscons driver on /dev/ttyC4
[    13.497]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    13.497] X Protocol Version 11, Revision 0
[    13.497] Build Operating System: OpenBSD 6.4 amd64
[    13.497] Current Operating System: OpenBSD c12h17n2o4p.my.domain
6.4 GENERIC.MP#7 amd64
[    13.497] Build Date: 25 October 2018  11:39:05PM
[    13.497]
[    13.497] Current version of pixman: 0.34.0
[    13.497] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    13.497] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.497] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar  2
14:09:48 2019
[    13.499] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.499] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[    13.501] (==) No Layout section.  Using the first Screen section.
[    13.501] (==) No screen section available. Using defaults.
[    13.501] (**) |-->Screen "Default Screen Section" (0)
[    13.501] (**) |   |-->Monitor "<default monitor>"
[    13.502] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[    13.502] (**) |   |-->Device "drm"
[    13.502] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    13.502] (==) Automatically adding devices
[    13.502] (==) Automatically enabling devices
[    13.502] (==) Not automatically adding GPU devices
[    13.502] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    13.510] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[    13.510] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    13.510] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    13.510] (II) Loader magic: 0x1b29fff71000
[    13.510] (II) Module ABI versions:
[    13.510] X.Org ANSI C Emulation: 0.4
[    13.510] X.Org Video Driver: 23.0
[    13.510] X.Org XInput driver : 24.1
[    13.510] X.Org Server Extension : 10.0
[    13.511] (--) PCI:*(0:0:2:0) 8086:1916:1028:0704 rev 7, Mem @
0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64
[    13.511] (II) LoadModule: "glx"
[    13.513] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    13.528] (II) Module glx: vendor="X.Org Foundation"
[    13.528] compiled for 1.19.6, module version = 1.0.0
[    13.528] ABI class: X.Org Server Extension, version 10.0
[    13.528] (II) LoadModule: "intel"
[    13.528] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[    13.532] (II) Module intel: vendor="X.Org Foundation"
[    13.532] compiled for 1.19.6, module version = 2.99.916
[    13.532] Module class: X.Org Video Driver
[    13.532] ABI class: X.Org Video Driver, version 23.0
[    13.532] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    13.533] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    13.533] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    13.533] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics:
5200, 6200, P6300
[    13.535] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20151010
[    13.537] (WW) intel(0): Unknown chipset
[    13.537] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
sse4.2, avx, avx2
[    13.537] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    13.537] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    13.537] (==) intel(0): RGB weight 888
[    13.537] (==) intel(0): Default visual is TrueColor
[    13.538] (**) intel(0): Option "TearFree" "true"

Re: Black screen when starting Xorg with Dell XPS 13 9350

Reply via email to