Hello misc@,
I recently purchased a laptop with a Marvell Yukon 8036 ethernet chip, which I
haven't been able to get working (the interface does not appear in ifconfig
output). The specific dmesg error looks like:
skc0 at pci1 dev 0 function 0 "Marvell Yukon 8036" rev 0x10: irq 10
skc0: bad VPD resource id: expected 82 got 0
skc0: unknown media type: 0x32
I have tried to Google the "bad VPD resource id" error with little success.
Any help that you could provide would be appreciated.
Thanks,
Bill
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1400 MHz (1308 mV): unknown EST cpu, no changes
possible
real mem = 1063755776 (1038824K)
avail mem = 964022272 (941428K)
using 4278 buffers containing 53288960 bytes (52040K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e0) BIOS, date 09/06/05, BIOS32 rev. 0 @ 0xfd700
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd700/0x900
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xe800! 0xce800/0x1000 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 915GM/GMS Video" rev 0x03: aperture at
0xb0080000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci1 at ppb0 bus 1
skc0 at pci1 dev 0 function 0 "Marvell Yukon 8036" rev 0x10: irq 10
skc0: bad VPD resource id: expected 82 got 0
skc0: unknown media type: 0x32
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 2
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11,
address 00:13:ce:4b:74:78
cbb0 at pci2 dev 4 function 0 vendor "Texas Instruments", unknown product
0x8031 rev 0x00: irq 10
vendor "Texas Instruments", unknown product 0x8032 (class serial bus subclass
Firewire, rev 0x00) at pci2 dev 4 function 2 not configured
vendor "Texas Instruments", unknown product 0x8033 (class mass storage subclass
miscellaneous, rev 0x00) at pci2 dev 4 function 3 not configured
vendor "Texas Instruments", unknown product 0x8034 (class system unknown
subclass 0x05, rev 0x00) at pci2 dev 4 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x24
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 10, ICH6
AC97
ac97: codec id 0x414c4752 (Avance Logic ALC250A?)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM IDE" rev 0x03: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541010G9AT00>
wd0: 16-sector PIO, LBA48, 95205MB, 194980905 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.50> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
iwi0: fatal error
