This is 6.5-current on an old ALIX (dmesg bellow).
I am syncing its backups to a remote machine with openrsync.
It works on all files except one that is big:
196M /backup/gw.stare.cz/dump.home.0
32.0K /backup/gw.stare.cz/dump.home.1
32.0K /backup/gw.stare.cz/dump.home.2
32.0K /backup/gw.stare.cz/dump.home.3
64.0K /backup/gw.stare.cz/dump.home.4
75.3M /backup/gw.stare.cz/dump.root.0
64.0K /backup/gw.stare.cz/dump.root.1
64.0K /backup/gw.stare.cz/dump.root.2
64.0K /backup/gw.stare.cz/dump.root.3
64.0K /backup/gw.stare.cz/dump.root.4
10.2M /backup/gw.stare.cz/dump.var.0
2.1M /backup/gw.stare.cz/dump.var.1
2.1M /backup/gw.stare.cz/dump.var.2
2.1M /backup/gw.stare.cz/dump.var.3
2.2M /backup/gw.stare.cz/dump.var.4
1.6G /backup/gw.stare.cz/dump.var.log.0
$ openrsync -av --del /backup/gw.stare.cz/ remote:/backup/gw.stare.cz
(sits there for a long time once it gets to the big file)
/usr/src/usr.bin/rsync/sender.c:550: error: /backup/gw.stare.cz/dump.var.log.0:
mmap: Cannot allocate memory
/usr/src/usr.bin/rsync/client.c:86: error: rsync_sender
According to ktrace,
66400 openrsync STRU struct stat { dev=9, ino=16224, mode=-rw------- , nlink=1
, uid=1000<"hans">, gid=0<"wheel">, rdev=115088, atime=1562283014<"Jul 5 01:30:
14 2019">.166197875, mtime=1565912129<"Aug 16 01:35:29 2019">.689322159, ctime=1
565912129<"Aug 16 01:35:29 2019">.689322159, size=1692231680, blocks=3305600, bl
ksize=65536, flags=0x0, gen=0x31cdf9ee }
66400 openrsync RET fstat 0
66400 openrsync CALL kbind(0xcf7d08b0,12,0xd5a85aa662cb95c1)
66400 openrsync RET kbind 0
66400 openrsync CALL mmap(0,0x64dd6800,0x1<PROT_READ>,0x1<MAP_SHARED>,4,0)
66400 openrsync RET mmap -1 errno 12 Cannot allocate memory
Does that mean openrsync tries to mmap() the entire file?
The machine only has 256MB of memory, but it does transfer
a test file of 300MB, so that can't be it.
Jan
OpenBSD 6.5-current (GENERIC) #6: Sat May 4 19:43:01 MDT 2019
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 267931648 (255MB)
avail mem = 247394304 (235MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 11/05/08, BIOS32 rev. 0 @ 0xfd088
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499
MHz, 05-0a-02
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address
00:0d:b9:1a:a4:10
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address
00:0d:b9:1a:a4:11
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 15, address
00:0d:b9:1a:a4:12
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
athn0 at pci0 dev 12 function 0 "Atheros AR9280" rev 0x01: irq 9
athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 04:f0:21:01:d6:86
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit
3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
maxtmp0 at iic0 addr 0x4c: lm86
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SDCFHS-016G>
wd0: 1-sector PIO, LBA48, 15279MB, 31293360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version 1.0,
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (9cd0e5ba033bd225.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
