On Mon, Sep 16, 2019 at 05:35:49PM +0200, Jan Stary wrote: > On Sep 14 12:58:39, h...@stare.cz wrote: > > This is current/macppc on an old macmini - dmesg below. > > (Putting old hw to work with OpenBSD is a joy; > > plus this is my only macppc test machine.) > > > > At boot(8) time, it stops at the boot prompt saying > > > > >> OpenBSD/macppc BOOT 1.7 > > /bsd.upgrade is not u+x > > /pci@f4000000/ata-6@d/disk@1:/etc/boot.conf: line too long > > boot> > > booting /pci@f4000000/ata-6@d/disk@1:/bsd/: > > /pci@f4000000/ata-6@d/disk@1:/bsd/: inappropriate file type or format > > failed(12304). will try /bsd > > boot> > > booting /pci@f4000000/ata-6@d/disk@1:/bsd/: > > /pci@f4000000/ata-6@d/disk@1:/bsd/: inappropriate file type or format > > failed(12304). will try /bsd > > Turning timeout off > > boot> > > > > Doing a manual > > > > boot> boot hd:/bsd > > > > boots just fine, and everything works. > > > > There is no /bsd.upgrade, and this is not a boot after an upgrade. > > I don't have /etc/boot.conf, so which line is too long? > > Why is /pci@f4000000/ata-6@d/disk@1:/bsd/ considered inappropriate? > > > > One thing i *suspect* is disk numbering confusion: > > I removed the builtin CD drive (because it got broken). > > Note the bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd > > at the very end of boot messages (disk@0 vs disk@1). > > > > Looking at 'devalias' in the machine's OpenFirmware, > > /pci@f4000000/ata-6@d/disk@1 is 'hd'; and 'hd:/bsd' is the default, > > so I am puzzled why that's what works as a manual command, > > but not as a default. > > Actually, no; excuse my tired eyes. > > In the machine's devalias, > 'hd' is /pci@f4000000/ata-6@d/disk@0 and > 'cd' is /pci@f4000000/ata-6@d/disk@1 . > > The CD drive is not even physically there, > so hd:,ofwboot must be booting from the hd (disk@0); > but that information is somehow lost along the way > from ofwboot to boot(8), who attempts to boot disk@1:/bsd > > How can I help debug this?
Hi, I'm writing this twice since I first decided not to continue but then I decided I may as well say something even if it's wrong, to help you out. When you say default is "hd:/bsd" I have taken a look at the INSTALL file for macppc, and it says: ----> Autobooting OpenBSD/macppc It is possible to automatically boot into OpenBSD (selectably into Mac OS) by setting up the following: setenv auto-boot? true setenv boot-device hd:,ofwboot [to save the results into NVRAM] reset-all <----- So I guess you have your boot-device variable set to that, you can also try setting it to "hd:,ofwboot /bsd" it won't make a diff I think. You can check with printenv to see what this environment variable is set to. https://ftp.openbsd.org/pub/OpenBSD/6.5/macppc/INSTALL.macppc is the INSTALL document that has more. If you need to debug further, the code for ofwboot is in /usr/src/sys/arch/macppc/stand Interesting to me was the "parsename()" function in ofdev.c, but I'm code dyslexic so it takes more time than just quickly looking over it as I just did. I don't know if that will solve your problem. Regards, -peter > > Jan > > > > > I tried putting 'boot hd:/bsd' into /etc/boot.conf > > (so that I can do remote reboots), but boot(8) stops > > with the very same messages. > > > > > > Jan > > > > > > This is the current dmesg. I have had the same problem > > with previous versions - previous dmesgs are available > > at http://stare.cz/dmesg/ as apple-macmini-7447A.* > > > > [ using 1289152 bytes of bsd ELF symbol table ] > > console out [ATY,RockHopper2_A] console in [keyboard], using USB > > using parent ATY,RockHopper2Paren:: memaddr 98000000, size 8000000 : > > consaddr 9c008000 : ioaddr 90020000, size 20000: width 1920 linebytes 2048 > > height 1080 depth 8 > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > Copyright (c) 1995-2019 OpenBSD. All rights reserved. > > https://www.OpenBSD.org > > > > OpenBSD 6.6-beta (GENERIC) #0: Wed Sep 11 10:56:40 CEST 2019 > > h...@ppc.stare.cz:/usr/src/sys/arch/macppc/compile/GENERIC > > real mem = 1073741824 (1024MB) > > avail mem = 1027039232 (979MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root: model PowerMac10,2 > > cpu0 at mainbus0: 7447A (Revision 0x102): 1499 MHz: 512KB L2 cache > > mem0 at mainbus0 > > spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0 > > memc0 at mainbus0: uni-n rev 0xd2 > > "hw-clock" at memc0 not configured > > kiic0 at memc0 offset 0xf8001000 > > iic0 at kiic0 > > mpcpcibr0 at mainbus0 pci: uni-north > > pci0 at mpcpcibr0 bus 0 > > pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 > > agp at pchb0 not configured > > radeondrm0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01 > > drm0 at radeondrm0 > > radeondrm0: irq 48 > > mpcpcibr1 at mainbus0 pci: uni-north > > pci1 at mpcpcibr1 bus 0 > > macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 > > openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE > > macgpio0 at macobio0 offset 0x50 > > "modem-reset" at macgpio0 offset 0x1d not configured > > "modem-power" at macgpio0 offset 0x1c not configured > > macgpio1 at macgpio0 offset 0x9: irq 47 > > "programmer-switch" at macgpio0 offset 0x11 not configured > > "gpio5" at macgpio0 offset 0x6f not configured > > "gpio6" at macgpio0 offset 0x70 not configured > > "extint-gpio15" at macgpio0 offset 0x67 not configured > > "escc-legacy" at macobio0 offset 0x12000 not configured > > zs0 at macobio0 offset 0x13000: irq 22,23 > > zstty0 at zs0 channel 0 > > zstty1 at zs0 channel 1 > > aoa0 at macobio0 offset 0x10000: irq 30,1,2 > > "timer" at macobio0 offset 0x15000 not configured > > adb0 at macobio0 offset 0x16000 > > apm0 at adb0: battery flags 0x0, 0% charged > > piic0 at adb0 > > iic1 at piic0 > > maxtmp0 at iic1 addr 0xc8: max6642 > > kiic1 at macobio0 offset 0x18000 > > iic2 at kiic1 > > wdc0 at macobio0 offset 0x20000 irq 24: DMA > > audio0 at aoa0 > > ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, > > version 1.0, legacy support > > ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 > > ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 > > ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00 > > addr 1 > > usb1 at ohci0: USB revision 1.0 > > uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev > > 1.00/1.00 addr 1 > > usb2 at ohci1: USB revision 1.0 > > uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 > > addr 1 > > usb3 at ohci2: USB revision 1.0 > > uhub3 at usb3 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 > > addr 1 > > mpcpcibr2 at mainbus0 pci: uni-north > > pci2 at mpcpcibr2 bus 0 > > kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 > > wdc1 at kauaiata0 irq 39: DMA > > wd0 at wdc1 channel 0 drive 0: <ST9160821A> > > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > > wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 > > "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured > > gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, > > address 00:14:51:17:42:34 > > bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in > > Apple Extended USB Keyboard" rev 1.10/4.10 addr 2 > > uhidev0 at uhub4 port 3 configuration 1 interface 0 "Mitsumi Electric Apple > > Extended USB Keyboard" rev 1.10/4.10 addr 3 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13 > > wskbd0 at ukbd0: console keyboard > > uhidev1 at uhub4 port 3 configuration 1 interface 1 "Mitsumi Electric Apple > > Extended USB Keyboard" rev 1.10/4.10 addr 3 > > uhidev1: iclass 3/0, 3 report ids > > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 > > vscsi0 at root > > scsibus1 at vscsi0: 256 targets > > softraid0 at root > > scsibus2 at softraid0: 256 targets > > bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd > > root on wd0a (64c5f028a86139ec.a) swap on wd0b dump on wd0b > > initializing kernel modesetting (RV280 0x1002:0x5962 0x1002:0x5962 0x01). > > [drm] *ERROR* Unable to locate a BIOS ROM > > radeondrm0: 1920x1080, 32bpp > > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > >
