On Tue, Feb 14, 2006 at 10:32:59PM -0600, Emilio Perea wrote: > Installing the latest (Feb 13) i386 x*tgz on two different computers > caused the keyboard to lock up. Mouse continued to work, but I was not > able to type anything or switch consoles. The systems involved were a > Dell Precision 330 workstation (upgrade) and a Toshiba 3480CT laptop > (new install to see if the problem could be duplicated). Both are > several years old and had run X without problems until today. > > Going back to the Feb 4 snapshot restored full functionality. > > It seems extremely unlikely that this could be a real bug, since nobody > else has mentioned it, so I suspect operator error. Did I miss a > required change in configuration between these two versions?
I just clean installed the latest snap (Feb 12) and I couldn't get xdm/X to run without changing /etc/X11/xdm/Xservers to use vt07 -- it would report a keyboard error (something about tcgetattr, can't find it at the moment). I'm also having problems with my keyboard (using the default keymap, arrow keys aren't detected properly on a 101 key keyboard), and when I clicked on the Mouse section of the KDE control panel my mouse has stopped working completely (despite restarting X multiple times). Didn't change anything, it broke as soon as the mouse applet came up. I haven't tried rebooting to solve that last one, I imagine that'll do it. dmesg follows: OpenBSD 3.9-beta (GENERIC) #601: Sun Feb 12 21:39:52 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 501 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX real mem = 804823040 (785960K) avail mem = 726986752 (709948K) using 4278 buffers containing 40345600 bytes (39400K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(1a) BIOS, date 04/12/00, BIOS32 rev. 0 @ 0xfb380 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb808 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdde0/144 (7 entries) pcibios0: PCI Exclusive IRQs: 3 7 10 11 12 pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0x8800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT82C598 PCI" rev 0x04 ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00 pci1 at ppb0 bus 1 pcib0 at pci0 dev 7 function 0 "VIA VT82C596A ISA" rev 0x23 pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <ST360021A> wd0: 16-sector PIO, LBA, 57241MB, 117231408 sectors wd1 at pciide0 channel 0 drive 1: <IBM-DTTA-350840> wd1: 16-sector PIO, LBA, 8063MB, 16514064 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, CD-R PX-W1210A, 1.09> SCSI0 5/cdrom removable cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x11: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "VIA VT82C596 Power" rev 0x30 at pci0 dev 7 function 3 not configured ppb1 at pci0 dev 17 function 0 "DEC 21052 PCI-PCI" rev 0x02 pci2 at ppb1 bus 2 de0 at pci2 dev 4 function 0 "DEC 21140" rev 0x12: irq 10 de0: ZNYX ZX34X pass 1.2 address 00:c0:95:e0:49:3c de1 at pci2 dev 5 function 0 "DEC 21140" rev 0x12: irq 12 de1: ZNYX ZX34X pass 1.2 address 00:c0:95:e0:49:3d de2 at pci2 dev 6 function 0 "DEC 21140" rev 0x12: irq 7 de2: ZNYX ZX34X pass 1.2 address 00:c0:95:e0:49:3e de3 at pci2 dev 7 function 0 "DEC 21140" rev 0x12: irq 3 de3: ZNYX ZX34X pass 1.2 address 00:c0:95:e0:49:3f vga1 at pci0 dev 18 function 0 "NVidia Riva TNT" rev 0x04 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ahc0 at pci0 dev 19 function 0 "Adaptec AHA-29160 U160" rev 0x02: irq 7 scsibus1 at ahc0: 16 targets isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 isapnp0 at isa0 port 0x279: read port 0x203 isapnp0: No current device for tag, card 1 sb1 at isapnp0 "Creative SB AWE64 PnP, CTL0045, , Audio" port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.16 midi1 at sb1: <SB MPU-401 UART> audio0 at sb1 opl0 at sb1: model OPL3 midi2 at opl0: <SB Yamaha OPL3> joy0 at isapnp0 "Creative SB AWE64 PnP, CTL7002, PNPB02F, Game" port 0x200/8 "Creative SB AWE64 PnP, CTL0022, , WaveTable" at isapnp0 port 0x620/4 not configured biomask ebd5 netmask ffdd ttymask ffdf pctr: user-level cycle counter enabled mtrr: K6-family MTRR support (2 registers) uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: vendor 0x04fc USB OpticalWheel Mouse, rev 1.10/6.b0, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 dkcsum: wd0 matches BIOS drive 0x80 wd1: no disk label dkcsum: wd1 matches BIOS drive 0x81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted