It sounds like the firmware hung.  What were you doing at the time?

On Wed, Feb 15, 2006 at 08:34:39PM +0100, Thierry Lacoste wrote:
> This week-end my web server running 3.8 on a Dell
> PowerEdge 1800 went belly up.
> 
> It was frozen but was responding to ping requests.
> I had only this message on the console:
> "ami0: timeout ccb 33"
> I had to restart it the hard way.
> Nothing in the logs.
> 
> The machine has 3 SCSI disks factory configured in RAID5.
> It is a generic install with safte disabled.
> Below is the beginning of my dmesg.
> 
> Any help to track down the problem would be appreciated.
> 
> Regards,
> Thierry.
> 
> OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
>     [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu0: 
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
> real mem  = 1073065984 (1047916K)
> avail mem = 972541952 (949748K)
> using 4278 buffers containing 53755904 bytes (52496K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 09/21/05, BIOS32 rev. 0 @ 0xffe90
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbb80/288 (16 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
> pcibios0: PCI bus #6 is the last bus
> bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x800 0xcc800/0x1000 
> 0xcd800/0x2600 0xec000/0x4000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x09
> ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x09
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci2 at ppb1 bus 2
> mpt0 at pci2 dev 4 function 0 "Symbios Logic 53c1030" rev 0x08: irq 5
> mpt0: sending FW Upload request to IOC (size: 36, img size: 40048)
> mpt0: IM support: 0
> scsibus0 at mpt0: 16 targets
> ami0 at pci2 dev 5 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 11 Dell 
> 520/64b/lhc
> ami0: FW 351S, BIOS v1.10, 64MB RAM
> ami0: 1 channels, 0 FC loops, 1 logical drives
> scsibus1 at ami0: 40 targets
> sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
> sd0: 139760MB, 17816 cyl, 255 head, 63 sec, 512 bytes/sec, 286228480 sec total
> scsibus2 at ami0: 16 targets

Reply via email to