I want to use DHCP to get an IP address and the gateway address. But I want to use my explicit defined nameserver (not the one given by DHCP).

Is that possible?

Kind regards

Felix

On 2019-11-19 20:06, Otto Moerbeek wrote:
On Tue, Nov 19, 2019 at 06:33:43PM +0100, Felix Maschek wrote:

I've got the following report from the webpage:

You use 12 DNS servers:
46.182.19.48        Germany    AS43847 Martin Prager trading as NbIServ
217.237.150.89        Germany    AS3320 Deutsche Telekom AG
217.237.150.90        Germany    AS3320 Deutsche Telekom AG
217.237.150.91        Germany    AS3320 Deutsche Telekom AG
217.237.150.92        Germany    AS3320 Deutsche Telekom AG
217.237.150.93        Germany    AS3320 Deutsche Telekom AG
217.237.150.94        Germany    AS3320 Deutsche Telekom AG
217.237.150.95        Germany    AS3320 Deutsche Telekom AG
217.237.150.96        Germany    AS3320 Deutsche Telekom AG
217.237.151.215        Germany    AS3320 Deutsche Telekom AG
217.237.151.217        Germany    AS3320 Deutsche Telekom AG
217.237.151.221        Germany    AS3320 Deutsche Telekom AG

Kind regards
If you do not want to use dhcp at all you can use

supersede domain-name-servers 127.0.0.1;

(instead of prepend) in dhclient.conf

        -Otto



Felix



On 2019-11-19 18:10, Felix Maschek wrote:
Hi,

status is showing:

     vatrox$ unwindctl status
     captive portal is unchecked

     selected             type status
            *              DoT validating
                      recursor validating

When I check with https://bash.ws/dnsleak, which DNS are contacted then
I can see, that not only the configured DNS is called. There are several
DNS as given by DHCP called, too. They, of course are supporting DoT as
well.

Kind regards

Felix

On 2019-11-19 16:56, Otto Moerbeek wrote:
On Tue, Nov 19, 2019 at 04:51:09PM +0100, Felix Maschek wrote:

Hi,

I have a running unwind configuration:

/etc/unwind.conf

      forwarder 46.182.19.48 port 853 authentication name
dns2.digitalcourage.de DoT

      preference { DoT recursor }


Unfortunately this DNS from Digitalcourage is sometimes slow and
so the DNS
learned from DHCP (which is supporting DoT, too) is called.

Is it possible to prevent this fallback so that only calls to
the specified
DNS are made?

Kind regards

Felix

What does unwindctl status show?

     -Otto


Reply via email to