dear all, to transfer files between an amd64 Linux, amd64 OpenBSD-current, and macppc OpenBSD-current i have a USB drive. last night was the first time i tried to use the drive on the macpcc.
Dec 19 06:09:06 apbg4 /bsd: umass0 at uhub0 port 2 configuration 1 interface 0 "BUFFALO SSD-PEU3" rev 2.10/1.10 addr 2 Dec 19 06:09:06 apbg4 /bsd: umass0: using SCSI over Bulk-Only Dec 19 06:09:06 apbg4 /bsd: scsibus4 at umass0: 2 targets, initiator 0 Dec 19 06:09:06 apbg4 /bsd: sd0 at scsibus4 targ 1 lun 0: <BUFFALO, SSD-PEU3, PMAP> serial.04110210357B1BD7B099 Dec 19 06:09:06 apbg4 /bsd: sd0: 241216MB, 512 bytes/sector, 494010368 sectors the disklabel was not detected properly. this is the disklabel on macppc OpenBSD-current (#638: Mon Dec 16): # /dev/rsd0c: type: SCSI disk: SCSI disk label: SSD-PEU3 duid: 0000000000000000 flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 30750 total sectors: 494010368 boundstart: 0 boundend: 494010368 drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] c: 494010368 0 unused i tried both USB ports of the Powerbook5,8. same results. this is the **correct** disklabel on amd64 OpenBSD-current (#637: Sun Dec 15): # /dev/rsd1c: type: SCSI disk: SCSI disk label: SSD-PEU3 duid: 0000000000000000 flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 30750 total sectors: 494010368 boundstart: 0 boundend: 494010368 drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] c: 494010368 0 unused i: 494006272 2048 ext2fs partition can be mounted properly on amd64 Linux and OpenBSD. IIRC the drive was initialized / created on Linux. i have other USB drives (whole disk, msdos format) that work properly across all 3 machines. what am i missing here? looking forward to some pointers. yorosiku ~