Hello thee, im trying to connect my TV to Thinkpad x220 via displayport - hdmi, but sound is only working on notebook not on TV. I tried some tricks from audio faq from site but no result. Problem is i have kinda low knowledge in audio related stuff in OpenBSD, cuz audio just works fine from the box on my laptop itself.
# dmesg | grep audio audio0 at azalia0 ############# # audioctl name=azalia0 mode= pause=1 active=0 nblks=16 blksz=480 rate=48000 encoding=s16le play.channels=2 play.bytes=0 play.errors=0 record.channels=2 record.bytes=0 record.errors=0 ############### # mixerctl inputs.dac-2:3_mute=off inputs.dac-2:3=189,189 inputs.dac-0:1_mute=off inputs.dac-0:1=189,189 inputs.beep=108 record.adc-2:3_source=mic3 record.adc-2:3_mute=off record.adc-2:3=126,126 record.adc-0:1_source=sel record.adc-0:1_mute=off record.adc-0:1=126,126 record.adc-4:5_source=sel record.adc-4:5_mute=off record.adc-4:5=126,126 inputs.sel_source=mic outputs.sel=126,126 inputs.sel2_source=mic outputs.sel2=126,126 outputs.hp_source=dac-0:1 outputs.hp_boost=off outputs.mic_dir=input-vr80 outputs.mic2_source=dac-2:3 outputs.mic2_dir=input-vr80 outputs.mic2_eapd=on outputs.hp2_source=dac-0:1 outputs.spkr_source=dac-2:3 inputs.mic3=126,126 inputs.mix_source=dac-2:3,dac-0:1 inputs.mix_dac-2:3=126,126 inputs.mix_dac-0:1=126,126 outputs.hp_sense=unplugged outputs.mic_sense=unplugged outputs.mic2_sense=unplugged outputs.hp2_sense=unplugged outputs.spkr_muters=hp,mic2,hp2 outputs.master=190,190 outputs.master.mute=off outputs.master.slaves=dac-2:3,dac-0:1 record.volume=126,126 record.volume.mute=off record.volume.slaves=adc-2:3,adc-0:1,adc-4:5 record.enable=sysctl Will appreciate any tip Regards Sent with [ProtonMail](https://protonmail.com) Secure Email.
