On Wed, Jan 22, 2020 at 09:49:18AM +0800, Peter Wong wrote:
> Yes, my ISP operate pppoe with vlan. How to configure my fxp0 using vlan id
> 500?
>
>
> Regards,
> ------------------------------
> Peter Wong
> 016-396 3326
Hi Peter Wong,
My PPPoE router uses VLAN id #7 (IEEE 802.1q protocol), this is how I set up
the vlan:
eta$ more /etc/hostname.vlan7
description "T-Online Internet"
vnetid 7 parent cnmac0
up mtu 1508
eta$ ifconfig vlan7
vlan7: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1508
lladdr fc:ec:da:04:8d:68
description: T-Online Internet
index 9 priority 0 llprio 3
encap: vnetid 7 parent cnmac0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (1000baseT full-duplex)
status: active
You may make your vlan similarly by setting vnetid to 500. And then instead of
your fxp interface you'd use vlan. In my case it's vlan7.
Hope that helps,
-peter
