Been a long time since I've written, but I've been reading (almost) all along, and it was that troll thread two months ago that keyed me into the fact that my email preferences were NOT being obeyed, and started the wheels grinding. In trying to set up a new system to begin knocking off 15 years of rust and starting to learn something new, I'm pulling a PowerEdge SC1435 out of the closet, then promptly getting a kernel panic from both install66.fs and install66.iso. Memory seems to check out, suspected cause is the Areca ARC-1200 RAID controller since that's where the boot process fails, but that's about all I can give apart from the drives behind the controller being a pair of Seagate 3TB ST3000DM001 drives configured as RAID-1 with 64bit LBA addressing, and that the keyboard is unresponsive (so no ps/trace) except for CTRL-A rebooting the system. I haven't tried 4k blocks yet, figured I'd ask first before beginning the array re-initialization process. Bootloader and dmesg follows:
CD-ROM: 82 Loading /6.6/AMD64/CDBOOT probing: pc0 com0 mem[640K 3581M 12800M a20=on] disk: hd0+* cd0 >> OpenBSD/amd64 CDBOOT 3.44 boot> set tty com0 switching console to com0 cannot open cd0a:/etc/random.seed: No such file or directory booting cd0a:/6.6/amd64/bsd.rd: 3732171+1537024+3885432+0+598016 [376562+128+455544+303577]=0xa648d0 entry point at 0xffffffff81001000 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.6 (RAMDISK_CD) #349: Sat Oct 12 11:03:52 MDT 2019 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 17161854976 (16366MB) avail mem = 16637759488 (15867MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdffbc000 (50 entries) bios0: vendor Dell Inc. version "2.2.5" date 03/21/2008 bios0: Dell Inc. PowerEdge SC1435 acpi0 at bios0: ACPI 3.0 acpi0: tables DSDT FACP APIC SPCR HPET MCFG SLIC ERST HEST BERT EINJ SRAT SSDT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Dual-Core AMD Opteron(tm) Processor 2212, 1995.35 MHz, 0f-41-02 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAP8 cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: apic clock running at 199MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 16 pins, remapped ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 11, 16 pins, remapped ioapic2 at mainbus0: apid 6 pa 0xfec02000, version 11, 16 pins, remapped acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 3 (PXB_) acpiprt2 at acpi0: bus 4 (PPBX) acpiprt3 at acpi0: bus 5 (EXB0) acpiprt4 at acpi0: bus 1 (EXB1) acpiprt5 at acpi0: bus 2 (EXB2) acpiprt6 at acpi0: bus 6 (EXB3) acpiprt7 at acpi0: bus 7 (EXB4) acpicpu at acpi0 not configured "PNP0A08" at acpi0 not configured acpicmos0 at acpi0 pci0 at mainbus0 bus 0 ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00 pci1 at ppb0 bus 3 ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xc0 pci2 at ppb1 bus 4 pchb0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00 "ServerWorks HT-1000 LPC" rev 0x00 at pci0 dev 2 function 2 not configured ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 15, version 1.0, legacy support ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 15, version 1.0, legacy support ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 15 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "ServerWorks EHCI root hub" rev 2.00/1.00 addr 1 vga1 at pci0 dev 4 function 0 "ATI ES1000" rev 0x02 wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) ppb2 at pci0 dev 7 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2 pci3 at ppb2 bus 5 ppb3 at pci0 dev 8 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2 pci4 at ppb3 bus 1 bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 (0x4201): msi, address 00:18:8b:75:37:ad brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb4 at pci0 dev 9 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2 pci5 at ppb4 bus 2 ppb5 at pci0 dev 10 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2: msi pci6 at ppb5 bus 6 arc0 at pci6 dev 0 function 0 "Areca ARC-1200B" rev 0x00: apic 5 int 3 uvm_fault(0xffffffff81910b70, 0x10, 0, 1) -> e fatal page fault in supervisor mode trap type 6 code 0 rip ffffffff8123f3ae cs 8 rflags 10293 cr2 10 cpl e rsp ffffffff81a068f0 gsbase 0xffffffff818afff0 kgsbase 0x0 panic: trap type 6, code=0, pc=ffffffff8123f3ae The operating system has halted. Please press any key to reboot.