On 21/02/2006, at 11:44 PM, Nick Holland wrote:
Alternate response:
If you know what parts of a dmesg we need to fix your problem, you
obviously can fix your own problem.
Fair call ... attached is a complete dmesg :) Further to that i've
experimented with the SCSI card BIOS by dropping the max speed from
20.0 to 10.0 and double/triple checking termination. The
configuration basically is single Adaptec 2940UW controller, nothing
connected internally, single HP DDS3 tape drive in a Sun enclosure.
Tape drive is terminatied (high+low), controller is terminated high
and low. Have tried terminating just the high byte but still getting
the same result.
Thanks,
Marcus
--- dmesg ---
OpenBSD 3.8 (NERF) #0: Fri Jan 20 13:35:16 EST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/NERF
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache)
551 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 536453120 (523880K)
avail mem = 485818368 (474432K)
using 4278 buffers containing 26927104 bytes (26296K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d9) BIOS, date 09/07/99, BIOS32 rev. 0 @
0xfb340
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb7bc
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA"
rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc9000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G100 AGP" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CR8.4A>
wd0: 16-sector PIO, LBA, 8063MB, 16514064 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-R/RW SW-252F, R802> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <E-IDE, CD-ROM 40X/AKU, T10> SCSI0 5/
cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
ahc0 at pci0 dev 9 function 0 "Adaptec AHA-2940U" rev 0x00: irq 11
scsibus2 at ahc0: 16 targets
st0 at scsibus2 targ 4 lun 0: <HP, C1537A, L706> SCSI2 1/sequential
removable
st0: density code 0x8c, variable blocks, write-enabled
fxp0 at pci0 dev 13 function 0 "Intel 82557" rev 0x08, i82559: irq 5,
address 00:d0:b7:18:1d:f4
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ne0 at pci0 dev 15 function 0 "Realtek 8029" rev 0x00: irq 10
ne0: address 00:60:67:2c:02:5a
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83781D
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff45 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
