Hello Riccardo, startx(1) had it's setuid bit removed. I think in the timeframe you are upgrading over. The canonical advice is to use xenodm(1).
Marcus [email protected] (Riccardo Mottola), 2020.04.06 (Mon) 11:57 (CEST): > Hi, > > lockdown times gave me finally times to update my workstation/home > server to 6.6 too, after my successful laptop upgrades. > > I was a moment scared when fw_update told me to reboot due to microcode > update :-P But it went fine. > > I followed 6.5 -> 6.6 upgrade. All packages are upgraded too (although X > should not depent on any pkg, right?) > > startx fails: > > (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" > Require OpenGL version 2.1 or later. > (EE) > Fatal server error: > (EE) AddScreen/ScreenInit failed for driver 0 > (EE) > (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > (EE) Please also check the log file at > "/home/multix/.local/share/xorg/Xorg.0.log" for additional information. > (EE) > (EE) Server terminated with error (1). Closing log file. > > > $ glxinfo | grep "OpenGL version" > OpenGL version string: 3.1 Mesa 19.0.8 > > and 3.1 is > 2.1 I do think... > > However, if I look into xorg.log, there is no "EE"! I am confused. > > I have an Intel graphics card and from Xorg.log everything looks fine: > > [ 89.926] ABI class: X.Org Video Driver, version 23.0 > [ 89.926] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: > i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, > 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, > Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, > Q33, > GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 > [ 89.927] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 > [ 89.927] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 > [ 89.927] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: > 5200, 6200, P6300 > [ 89.930] (II) intel(0): Using Kernel Mode Setting driver: i915, > version 1.6.0 20151010 > [ 89.933] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915G > [ 89.933] (--) intel(0): CPU: x86, sse2, sse3 > [ 89.933] (II) intel(0): Creating default Display subsection in > Screen section > "Default Screen Section" for depth/fbbpp 24/32 > [ 89.933] (==) intel(0): Depth 24, (--) framebuffer bpp 32 > [ 89.934] (==) intel(0): RGB weight 888 > [ 89.934] (==) intel(0): Default visual is TrueColor > [ 89.935] (II) intel(0): Output VGA1 has no monitor section > [ 89.935] (II) intel(0): Enabled output VGA1 > [ 89.935] (--) intel(0): Using a maximum size of 256x256 for hardware > cursors > [ 89.935] (II) intel(0): Output VIRTUAL1 has no monitor section > [ 89.935] (II) intel(0): Enabled output VIRTUAL1 > [ 89.935] (--) intel(0): Output VGA1 using initial mode 1024x768 on > pipe 0 > [ 89.936] (==) intel(0): TearFree disabled > [ 89.936] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) > [ 89.936] (==) intel(0): DPI set to (96, 96) > [ 89.936] (II) Loading sub module "dri3" > [ 89.936] (II) LoadModule: "dri3" > [ 89.936] (II) Module "dri3" already built-in > [ 89.936] (II) Loading sub module "dri2" > [ 89.936] (II) LoadModule: "dri2" > [ 89.936] (II) Module "dri2" already built-in > [ 89.936] (II) Loading sub module "present" > [ 89.936] (II) LoadModule: "present" > [ 89.936] (II) Module "present" already built-in > [ 89.936] (==) Depth 24 pixmap format is 32 bpp > [ 89.970] (II) intel(0): SNA initialized with Alviso (gen3) backend > [ 89.970] (==) intel(0): Backing store enabled > [ 89.970] (==) intel(0): Silken mouse enabled > [ 89.970] (II) intel(0): HW Cursor enabled > [ 89.970] (II) intel(0): RandR 1.2 enabled, ignore the following > RandR disabled message. > [ 89.973] (==) intel(0): DPMS enabled > [ 89.974] (II) intel(0): [DRI2] Setup complete > [ 89.974] (II) intel(0): [DRI2] DRI driver: i915 > [ 89.974] (II) intel(0): [DRI2] VDPAU driver: i915 > [ 89.974] (II) intel(0): direct rendering: DRI2 DRI3 enabled > [ 89.974] (II) intel(0): hardware support for Present enabled > [ 89.974] (--) RandR disabled > [ 90.163] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer > [ 90.163] (II) AIGLX: enabled GLX_ARB_create_context > [ 90.163] (II) AIGLX: enabled GLX_ARB_create_context_profile > [ 90.163] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile > [ 90.164] (II) AIGLX: enabled GLX_INTEL_swap_event > [ 90.164] (II) AIGLX: enabled GLX_SGI_swap_control > [ 90.164] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB > [ 90.164] (II) AIGLX: enabled GLX_ARB_fbconfig_float > [ 90.164] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float > [ 90.164] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer > objects > [ 90.172] (II) AIGLX: Loaded and initialized i915 > [ 90.172] (II) GLX: Initialized DRI2 GL provider for screen 0 > [ 90.184] (II) intel(0): switch to mode [email protected] on VGA1 using > pipe 0, position (0, 0), rotation normal, reflecti > on none > [ 90.195] (II) intel(0): Setting screen physical size to 270 x 203 > [ 90.699] (II) config/wscons: checking input device /dev/wskbd > [ 90.699] (II) wskbd: using layout it > [ 90.700] (II) LoadModule: "kbd" > [ 90.729] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so > [ 90.744] (II) Module kbd: vendor="X.Org Foundation" > [ 90.744] compiled for 1.19.6, module version = 1.9.0 > [ 90.744] Module class: X.Org XInput Driver > [ 90.744] ABI class: X.Org XInput driver, version 24.1 > [ 90.744] (II) Using input driver 'kbd' for '/dev/wskbd' > [ 90.745] (**) /dev/wskbd: always reports core events > > > > Any suggestions? > > Riccardo >
